| 1 |
// SPDX-License-Identifier: GPL-2.0 OR MIT |
| 2 |
/* |
| 3 |
* Copyright 2019 Ondrej Jirman <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include "sun5i-a13.dtsi" |
| 8 |
#include "sunxi-common-regulators.dtsi" |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 12 |
#include <dt-bindings/pwm/pwm.h> |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "PocketBook Touch Lux 3"; |
| 16 |
compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13"; |
| 17 |
|
| 18 |
aliases { |
| 19 |
serial0 = &uart1; |
| 20 |
i2c0 = &i2c0; |
| 21 |
i2c1 = &i2c1; |
| 22 |
i2c2 = &i2c2; |
| 23 |
}; |
| 24 |
|
| 25 |
backlight { |
| 26 |
compatible = "pwm-backlight"; |
| 27 |
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; |
| 28 |
enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ |
| 29 |
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; |
| 30 |
default-brightness-level = <8>; |
| 31 |
power-supply = <®_vcc3v3>; |
| 32 |
}; |
| 33 |
|
| 34 |
chosen { |
| 35 |
stdout-path = "serial0:115200n8"; |
| 36 |
}; |
| 37 |
|
| 38 |
leds { |
| 39 |
compatible = "gpio-leds"; |
| 40 |
|
| 41 |
led { |
| 42 |
gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */ |
| 43 |
default-state = "on"; |
| 44 |
}; |
| 45 |
}; |
| 46 |
|
| 47 |
gpio-keys { |
| 48 |
compatible = "gpio-keys"; |
| 49 |
autorepeat; |
| 50 |
label = "GPIO Keys"; |
| 51 |
|
| 52 |
key-right { |
| 53 |
label = "Right"; |
| 54 |
linux,code = <KEY_RIGHT>; |
| 55 |
gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */ |
| 56 |
}; |
| 57 |
|
| 58 |
key-left { |
| 59 |
label = "Left"; |
| 60 |
linux,code = <KEY_LEFT>; |
| 61 |
gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */ |
| 62 |
}; |
| 63 |
}; |
| 64 |
|
| 65 |
reg_1v8: regulator-1v8 { |
| 66 |
compatible = "regulator-fixed"; |
| 67 |
regulator-name = "vdd-1v8-nor-ctp"; |
| 68 |
regulator-min-microvolt = <1800000>; |
| 69 |
regulator-max-microvolt = <1800000>; |
| 70 |
gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>; |
| 71 |
enable-active-high; |
| 72 |
}; |
| 73 |
|
| 74 |
reg_1v8_nor: regulator-nor { |
| 75 |
compatible = "regulator-fixed"; |
| 76 |
regulator-name = "vdd-nor"; |
| 77 |
regulator-min-microvolt = <1800000>; |
| 78 |
regulator-max-microvolt = <1800000>; |
| 79 |
gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>; |
| 80 |
enable-active-high; |
| 81 |
vin-supply = <®_1v8>; |
| 82 |
regulator-always-on; |
| 83 |
}; |
| 84 |
|
| 85 |
reg_1v8_ctp: regulator-ctp { |
| 86 |
compatible = "regulator-fixed"; |
| 87 |
regulator-name = "vdd-ctp"; |
| 88 |
regulator-min-microvolt = <1800000>; |
| 89 |
regulator-max-microvolt = <1800000>; |
| 90 |
gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>; |
| 91 |
enable-active-high; |
| 92 |
vin-supply = <®_1v8>; |
| 93 |
}; |
| 94 |
|
| 95 |
reg_3v3_mmc0: regulator-mmc0 { |
| 96 |
compatible = "regulator-fixed"; |
| 97 |
regulator-name = "vdd-mmc0"; |
| 98 |
regulator-min-microvolt = <3300000>; |
| 99 |
regulator-max-microvolt = <3300000>; |
| 100 |
gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */ |
| 101 |
vin-supply = <®_vcc3v3>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
&cpu0 { |
| 106 |
cpu-supply = <®_dcdc2>; |
| 107 |
}; |
| 108 |
|
| 109 |
&ehci0 { |
| 110 |
status = "okay"; |
| 111 |
}; |
| 112 |
|
| 113 |
&i2c0 { |
| 114 |
status = "okay"; |
| 115 |
|
| 116 |
axp209: pmic@34 { |
| 117 |
reg = <0x34>; |
| 118 |
interrupts = <0>; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
#include "axp209.dtsi" |
| 123 |
|
| 124 |
&i2c1 { |
| 125 |
status = "okay"; |
| 126 |
|
| 127 |
pcf8563: rtc@51 { |
| 128 |
compatible = "nxp,pcf8563"; |
| 129 |
reg = <0x51>; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
&i2c2 { |
| 134 |
status = "okay"; |
| 135 |
|
| 136 |
/* Touchpanel is connected here. */ |
| 137 |
}; |
| 138 |
|
| 139 |
&lradc { |
| 140 |
vref-supply = <®_ldo2>; |
| 141 |
status = "okay"; |
| 142 |
|
| 143 |
button-200 { |
| 144 |
label = "Home"; |
| 145 |
linux,code = <KEY_HOME>; |
| 146 |
channel = <0>; |
| 147 |
voltage = <200000>; |
| 148 |
}; |
| 149 |
|
| 150 |
button-400 { |
| 151 |
label = "Menu"; |
| 152 |
linux,code = <KEY_MENU>; |
| 153 |
channel = <0>; |
| 154 |
voltage = <400000>; |
| 155 |
}; |
| 156 |
}; |
| 157 |
|
| 158 |
&mmc0 { |
| 159 |
vmmc-supply = <®_3v3_mmc0>; |
| 160 |
bus-width = <4>; |
| 161 |
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ |
| 162 |
status = "okay"; |
| 163 |
}; |
| 164 |
|
| 165 |
&mmc2 { |
| 166 |
pinctrl-names = "default"; |
| 167 |
pinctrl-0 = <&mmc2_4bit_pc_pins>; |
| 168 |
vmmc-supply = <®_vcc3v3>; |
| 169 |
bus-width = <4>; |
| 170 |
non-removable; |
| 171 |
status = "okay"; |
| 172 |
}; |
| 173 |
|
| 174 |
&ohci0 { |
| 175 |
status = "okay"; |
| 176 |
}; |
| 177 |
|
| 178 |
&otg_sram { |
| 179 |
status = "okay"; |
| 180 |
}; |
| 181 |
|
| 182 |
&pwm { |
| 183 |
pinctrl-names = "default"; |
| 184 |
pinctrl-0 = <&pwm0_pin>; |
| 185 |
status = "okay"; |
| 186 |
}; |
| 187 |
|
| 188 |
®_dcdc2 { |
| 189 |
regulator-always-on; |
| 190 |
regulator-min-microvolt = <1000000>; |
| 191 |
regulator-max-microvolt = <1400000>; |
| 192 |
regulator-name = "vdd-cpu"; |
| 193 |
}; |
| 194 |
|
| 195 |
®_dcdc3 { |
| 196 |
regulator-always-on; |
| 197 |
regulator-min-microvolt = <1200000>; |
| 198 |
regulator-max-microvolt = <1200000>; |
| 199 |
regulator-name = "vdd-int-pll"; |
| 200 |
}; |
| 201 |
|
| 202 |
®_ldo1 { |
| 203 |
regulator-name = "vdd-rtc"; |
| 204 |
}; |
| 205 |
|
| 206 |
®_ldo2 { |
| 207 |
regulator-always-on; |
| 208 |
regulator-min-microvolt = <3000000>; |
| 209 |
regulator-max-microvolt = <3000000>; |
| 210 |
regulator-name = "avcc"; |
| 211 |
}; |
| 212 |
|
| 213 |
®_ldo3 { |
| 214 |
regulator-min-microvolt = <3300000>; |
| 215 |
regulator-max-microvolt = <3300000>; |
| 216 |
regulator-name = "vcc-wifi"; |
| 217 |
/* We need this otherwise the LDO3 would overload */ |
| 218 |
regulator-soft-start; |
| 219 |
regulator-ramp-delay = <1600>; |
| 220 |
}; |
| 221 |
|
| 222 |
&spi2 { |
| 223 |
pinctrl-names = "default"; |
| 224 |
pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>; |
| 225 |
status = "okay"; |
| 226 |
|
| 227 |
epd_flash: flash@0 { |
| 228 |
#address-cells = <1>; |
| 229 |
#size-cells = <1>; |
| 230 |
compatible = "macronix,mx25u4033", "jedec,spi-nor"; |
| 231 |
reg = <0>; |
| 232 |
spi-max-frequency = <4000000>; |
| 233 |
}; |
| 234 |
}; |
| 235 |
|
| 236 |
&uart1 { |
| 237 |
pinctrl-names = "default"; |
| 238 |
pinctrl-0 = <&uart1_pg_pins>; |
| 239 |
status = "okay"; |
| 240 |
}; |
| 241 |
|
| 242 |
&usb_otg { |
| 243 |
dr_mode = "peripheral"; |
| 244 |
status = "okay"; |
| 245 |
}; |
| 246 |
|
| 247 |
&battery_power_supply { |
| 248 |
status = "okay"; |
| 249 |
}; |
| 250 |
|
| 251 |
&usb_power_supply { |
| 252 |
status = "okay"; |
| 253 |
}; |
| 254 |
|
| 255 |
&usbphy { |
| 256 |
usb1_vbus-supply = <®_ldo3>; |
| 257 |
status = "okay"; |
| 258 |
}; |