| 1 |
/* |
| 2 |
* Copyright (c) 2017 Free Electrons <[email protected]> |
| 3 |
* |
| 4 |
* This file is dual-licensed: you can use it either under the terms |
| 5 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 6 |
* licensing only applies to this file, and not this project as a |
| 7 |
* whole. |
| 8 |
* |
| 9 |
* a) This file is free software; you can redistribute it and/or |
| 10 |
* modify it under the terms of the GNU General Public License as |
| 11 |
* published by the Free Software Foundation; either version 2 of the |
| 12 |
* License, or (at your option) any later version. |
| 13 |
* |
| 14 |
* This file is distributed in the hope that it will be useful, |
| 15 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 |
* GNU General Public License for more details. |
| 18 |
* |
| 19 |
* Or, alternatively, |
| 20 |
* |
| 21 |
* b) Permission is hereby granted, free of charge, to any person |
| 22 |
* obtaining a copy of this software and associated documentation |
| 23 |
* files (the "Software"), to deal in the Software without |
| 24 |
* restriction, including without limitation the rights to use, |
| 25 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 26 |
* sell copies of the Software, and to permit persons to whom the |
| 27 |
* Software is furnished to do so, subject to the following |
| 28 |
* conditions: |
| 29 |
* |
| 30 |
* The above copyright notice and this permission notice shall be |
| 31 |
* included in all copies or substantial portions of the Software. |
| 32 |
* |
| 33 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 34 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 35 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 36 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 37 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 38 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 39 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 40 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 41 |
*/ |
| 42 |
|
| 43 |
/dts-v1/; |
| 44 |
#include "sun8i-a33.dtsi" |
| 45 |
|
| 46 |
#include <dt-bindings/gpio/gpio.h> |
| 47 |
|
| 48 |
/ { |
| 49 |
model = "BananaPi M2 Magic"; |
| 50 |
compatible = "sinovoip,bananapi-m2m", "allwinner,sun8i-a33"; |
| 51 |
|
| 52 |
aliases { |
| 53 |
i2c0 = &i2c0; |
| 54 |
i2c1 = &i2c1; |
| 55 |
i2c2 = &i2c2; |
| 56 |
serial0 = &uart0; |
| 57 |
serial1 = &uart1; |
| 58 |
}; |
| 59 |
|
| 60 |
chosen { |
| 61 |
stdout-path = "serial0:115200n8"; |
| 62 |
}; |
| 63 |
|
| 64 |
leds { |
| 65 |
compatible = "gpio-leds"; |
| 66 |
|
| 67 |
led-0 { |
| 68 |
label = "bpi-m2m:blue:usr"; |
| 69 |
gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; |
| 70 |
}; |
| 71 |
|
| 72 |
led-1 { |
| 73 |
label = "bpi-m2m:green:usr"; |
| 74 |
gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; |
| 75 |
}; |
| 76 |
|
| 77 |
led-2 { |
| 78 |
label = "bpi-m2m:red:power"; |
| 79 |
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; |
| 80 |
default-state = "on"; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
reg_vcc5v0: vcc5v0 { |
| 85 |
compatible = "regulator-fixed"; |
| 86 |
regulator-name = "vcc5v0"; |
| 87 |
regulator-min-microvolt = <5000000>; |
| 88 |
regulator-max-microvolt = <5000000>; |
| 89 |
}; |
| 90 |
|
| 91 |
wifi_pwrseq: pwrseq { |
| 92 |
compatible = "mmc-pwrseq-simple"; |
| 93 |
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ |
| 94 |
clocks = <&rtc CLK_OSC32K_FANOUT>; |
| 95 |
clock-names = "ext_clock"; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
&codec { |
| 100 |
status = "okay"; |
| 101 |
}; |
| 102 |
|
| 103 |
&cpu0 { |
| 104 |
cpu-supply = <®_dcdc3>; |
| 105 |
}; |
| 106 |
|
| 107 |
&cpu0_opp_table { |
| 108 |
opp-1104000000 { |
| 109 |
opp-hz = /bits/ 64 <1104000000>; |
| 110 |
opp-microvolt = <1320000>; |
| 111 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 112 |
}; |
| 113 |
|
| 114 |
opp-1200000000 { |
| 115 |
opp-hz = /bits/ 64 <1200000000>; |
| 116 |
opp-microvolt = <1320000>; |
| 117 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 118 |
}; |
| 119 |
}; |
| 120 |
|
| 121 |
&dai { |
| 122 |
status = "okay"; |
| 123 |
}; |
| 124 |
|
| 125 |
&ehci0 { |
| 126 |
status = "okay"; |
| 127 |
}; |
| 128 |
|
| 129 |
&mmc0 { |
| 130 |
vmmc-supply = <®_dcdc1>; |
| 131 |
bus-width = <4>; |
| 132 |
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ |
| 133 |
status = "okay"; |
| 134 |
}; |
| 135 |
|
| 136 |
&mmc1 { |
| 137 |
pinctrl-names = "default"; |
| 138 |
pinctrl-0 = <&mmc1_pg_pins>; |
| 139 |
vmmc-supply = <®_aldo1>; |
| 140 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 141 |
bus-width = <4>; |
| 142 |
non-removable; |
| 143 |
status = "okay"; |
| 144 |
}; |
| 145 |
|
| 146 |
&mmc2 { |
| 147 |
pinctrl-names = "default"; |
| 148 |
pinctrl-0 = <&mmc2_8bit_pins>; |
| 149 |
vmmc-supply = <®_dcdc1>; |
| 150 |
bus-width = <8>; |
| 151 |
non-removable; |
| 152 |
cap-mmc-hw-reset; |
| 153 |
status = "okay"; |
| 154 |
}; |
| 155 |
|
| 156 |
&ohci0 { |
| 157 |
status = "okay"; |
| 158 |
}; |
| 159 |
|
| 160 |
&r_rsb { |
| 161 |
status = "okay"; |
| 162 |
|
| 163 |
axp22x: pmic@3a3 { |
| 164 |
compatible = "x-powers,axp223"; |
| 165 |
reg = <0x3a3>; |
| 166 |
interrupt-parent = <&r_intc>; |
| 167 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; |
| 168 |
eldoin-supply = <®_dcdc1>; |
| 169 |
x-powers,drive-vbus-en; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
#include "axp223.dtsi" |
| 174 |
|
| 175 |
&ac_power_supply { |
| 176 |
status = "okay"; |
| 177 |
}; |
| 178 |
|
| 179 |
®_aldo1 { |
| 180 |
regulator-always-on; |
| 181 |
regulator-min-microvolt = <3000000>; |
| 182 |
regulator-max-microvolt = <3000000>; |
| 183 |
regulator-name = "vcc-io"; |
| 184 |
}; |
| 185 |
|
| 186 |
®_aldo2 { |
| 187 |
regulator-always-on; |
| 188 |
regulator-min-microvolt = <2500000>; |
| 189 |
regulator-max-microvolt = <2500000>; |
| 190 |
regulator-name = "vdd-dll"; |
| 191 |
}; |
| 192 |
|
| 193 |
®_aldo3 { |
| 194 |
regulator-always-on; |
| 195 |
regulator-min-microvolt = <3000000>; |
| 196 |
regulator-max-microvolt = <3000000>; |
| 197 |
regulator-name = "avcc"; |
| 198 |
}; |
| 199 |
|
| 200 |
®_dc1sw { |
| 201 |
regulator-name = "vcc-lcd"; |
| 202 |
}; |
| 203 |
|
| 204 |
®_dc5ldo { |
| 205 |
regulator-always-on; |
| 206 |
regulator-min-microvolt = <900000>; |
| 207 |
regulator-max-microvolt = <1400000>; |
| 208 |
regulator-name = "vdd-cpus"; |
| 209 |
}; |
| 210 |
|
| 211 |
®_dcdc1 { |
| 212 |
regulator-always-on; |
| 213 |
regulator-min-microvolt = <3000000>; |
| 214 |
regulator-max-microvolt = <3000000>; |
| 215 |
regulator-name = "vcc-3v0"; |
| 216 |
}; |
| 217 |
|
| 218 |
®_dcdc2 { |
| 219 |
regulator-always-on; |
| 220 |
regulator-min-microvolt = <900000>; |
| 221 |
regulator-max-microvolt = <1400000>; |
| 222 |
regulator-name = "vdd-sys"; |
| 223 |
}; |
| 224 |
|
| 225 |
®_dcdc3 { |
| 226 |
regulator-always-on; |
| 227 |
regulator-min-microvolt = <900000>; |
| 228 |
regulator-max-microvolt = <1400000>; |
| 229 |
regulator-name = "vdd-cpu"; |
| 230 |
}; |
| 231 |
|
| 232 |
®_dcdc5 { |
| 233 |
regulator-always-on; |
| 234 |
regulator-min-microvolt = <1500000>; |
| 235 |
regulator-max-microvolt = <1500000>; |
| 236 |
regulator-name = "vcc-dram"; |
| 237 |
}; |
| 238 |
|
| 239 |
/* |
| 240 |
* Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same |
| 241 |
* time, with the two being in sync. Since this is not really |
| 242 |
* supported right now, just use the two as always on, and we will fix |
| 243 |
* it later. |
| 244 |
*/ |
| 245 |
®_dldo1 { |
| 246 |
regulator-always-on; |
| 247 |
regulator-min-microvolt = <3300000>; |
| 248 |
regulator-max-microvolt = <3300000>; |
| 249 |
regulator-name = "vcc-wifi0"; |
| 250 |
}; |
| 251 |
|
| 252 |
®_dldo2 { |
| 253 |
regulator-always-on; |
| 254 |
regulator-min-microvolt = <3300000>; |
| 255 |
regulator-max-microvolt = <3300000>; |
| 256 |
regulator-name = "vcc-wifi1"; |
| 257 |
}; |
| 258 |
|
| 259 |
®_drivevbus { |
| 260 |
regulator-name = "usb0-vbus"; |
| 261 |
status = "okay"; |
| 262 |
}; |
| 263 |
|
| 264 |
®_rtc_ldo { |
| 265 |
regulator-name = "vcc-rtc"; |
| 266 |
}; |
| 267 |
|
| 268 |
&sound { |
| 269 |
status = "okay"; |
| 270 |
}; |
| 271 |
|
| 272 |
&uart0 { |
| 273 |
pinctrl-names = "default"; |
| 274 |
pinctrl-0 = <&uart0_pb_pins>; |
| 275 |
status = "okay"; |
| 276 |
}; |
| 277 |
|
| 278 |
&uart1 { |
| 279 |
pinctrl-names = "default"; |
| 280 |
pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>; |
| 281 |
uart-has-rtscts; |
| 282 |
status = "okay"; |
| 283 |
|
| 284 |
bluetooth { |
| 285 |
compatible = "brcm,bcm43438-bt"; |
| 286 |
clocks = <&rtc CLK_OSC32K_FANOUT>; |
| 287 |
clock-names = "lpo"; |
| 288 |
vbat-supply = <®_dldo1>; |
| 289 |
vddio-supply = <®_aldo3>; |
| 290 |
device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ |
| 291 |
host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ |
| 292 |
shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ |
| 293 |
}; |
| 294 |
}; |
| 295 |
|
| 296 |
&usb_otg { |
| 297 |
dr_mode = "otg"; |
| 298 |
status = "okay"; |
| 299 |
}; |
| 300 |
|
| 301 |
&usb_power_supply { |
| 302 |
status = "okay"; |
| 303 |
}; |
| 304 |
|
| 305 |
&usbphy { |
| 306 |
usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ |
| 307 |
usb0_vbus_power-supply = <&usb_power_supply>; |
| 308 |
usb0_vbus-supply = <®_drivevbus>; |
| 309 |
usb1_vbus-supply = <®_vcc5v0>; |
| 310 |
status = "okay"; |
| 311 |
}; |