| 1 |
/* |
| 2 |
* Copyright 2013 Maxime Ripard |
| 3 |
* |
| 4 |
* Maxime Ripard <[email protected]> |
| 5 |
* |
| 6 |
* This file is dual-licensed: you can use it either under the terms |
| 7 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 8 |
* licensing only applies to this file, and not this project as a |
| 9 |
* whole. |
| 10 |
* |
| 11 |
* a) This file is free software; you can redistribute it and/or |
| 12 |
* modify it under the terms of the GNU General Public License as |
| 13 |
* published by the Free Software Foundation; either version 2 of the |
| 14 |
* License, or (at your option) any later version. |
| 15 |
* |
| 16 |
* This file is distributed in the hope that it will be useful, |
| 17 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 |
* GNU General Public License for more details. |
| 20 |
* |
| 21 |
* Or, alternatively, |
| 22 |
* |
| 23 |
* b) Permission is hereby granted, free of charge, to any person |
| 24 |
* obtaining a copy of this software and associated documentation |
| 25 |
* files (the "Software"), to deal in the Software without |
| 26 |
* restriction, including without limitation the rights to use, |
| 27 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 28 |
* sell copies of the Software, and to permit persons to whom the |
| 29 |
* Software is furnished to do so, subject to the following |
| 30 |
* conditions: |
| 31 |
* |
| 32 |
* The above copyright notice and this permission notice shall be |
| 33 |
* included in all copies or substantial portions of the Software. |
| 34 |
* |
| 35 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 36 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 37 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 38 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 39 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 40 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 41 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 42 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 43 |
*/ |
| 44 |
|
| 45 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 46 |
#include <dt-bindings/thermal/thermal.h> |
| 47 |
#include <dt-bindings/dma/sun4i-a10.h> |
| 48 |
#include <dt-bindings/clock/sun7i-a20-ccu.h> |
| 49 |
#include <dt-bindings/reset/sun4i-a10-ccu.h> |
| 50 |
#include <dt-bindings/pinctrl/sun4i-a10.h> |
| 51 |
|
| 52 |
/ { |
| 53 |
interrupt-parent = <&gic>; |
| 54 |
#address-cells = <1>; |
| 55 |
#size-cells = <1>; |
| 56 |
|
| 57 |
aliases { |
| 58 |
ethernet0 = &gmac; |
| 59 |
}; |
| 60 |
|
| 61 |
chosen { |
| 62 |
#address-cells = <1>; |
| 63 |
#size-cells = <1>; |
| 64 |
ranges; |
| 65 |
|
| 66 |
framebuffer-lcd0-hdmi { |
| 67 |
compatible = "allwinner,simple-framebuffer", |
| 68 |
"simple-framebuffer"; |
| 69 |
allwinner,pipeline = "de_be0-lcd0-hdmi"; |
| 70 |
clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, |
| 71 |
<&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, |
| 72 |
<&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>, |
| 73 |
<&ccu CLK_HDMI>; |
| 74 |
status = "disabled"; |
| 75 |
}; |
| 76 |
|
| 77 |
framebuffer-lcd0 { |
| 78 |
compatible = "allwinner,simple-framebuffer", |
| 79 |
"simple-framebuffer"; |
| 80 |
allwinner,pipeline = "de_be0-lcd0"; |
| 81 |
clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, |
| 82 |
<&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>, |
| 83 |
<&ccu CLK_DRAM_DE_BE0>; |
| 84 |
status = "disabled"; |
| 85 |
}; |
| 86 |
|
| 87 |
framebuffer-lcd0-tve0 { |
| 88 |
compatible = "allwinner,simple-framebuffer", |
| 89 |
"simple-framebuffer"; |
| 90 |
allwinner,pipeline = "de_be0-lcd0-tve0"; |
| 91 |
clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, |
| 92 |
<&ccu CLK_AHB_DE_BE0>, |
| 93 |
<&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>, |
| 94 |
<&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>; |
| 95 |
status = "disabled"; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
cpus { |
| 100 |
#address-cells = <1>; |
| 101 |
#size-cells = <0>; |
| 102 |
|
| 103 |
cpu0: cpu@0 { |
| 104 |
compatible = "arm,cortex-a7"; |
| 105 |
device_type = "cpu"; |
| 106 |
reg = <0>; |
| 107 |
clocks = <&ccu CLK_CPU>; |
| 108 |
clock-latency = <244144>; /* 8 32k periods */ |
| 109 |
operating-points = |
| 110 |
/* kHz uV */ |
| 111 |
<960000 1400000>, |
| 112 |
<912000 1400000>, |
| 113 |
<864000 1300000>, |
| 114 |
<720000 1200000>, |
| 115 |
<528000 1100000>, |
| 116 |
<312000 1000000>, |
| 117 |
<144000 1000000>; |
| 118 |
#cooling-cells = <2>; |
| 119 |
}; |
| 120 |
|
| 121 |
cpu1: cpu@1 { |
| 122 |
compatible = "arm,cortex-a7"; |
| 123 |
device_type = "cpu"; |
| 124 |
reg = <1>; |
| 125 |
clocks = <&ccu CLK_CPU>; |
| 126 |
clock-latency = <244144>; /* 8 32k periods */ |
| 127 |
operating-points = |
| 128 |
/* kHz uV */ |
| 129 |
<960000 1400000>, |
| 130 |
<912000 1400000>, |
| 131 |
<864000 1300000>, |
| 132 |
<720000 1200000>, |
| 133 |
<528000 1100000>, |
| 134 |
<312000 1000000>, |
| 135 |
<144000 1000000>; |
| 136 |
#cooling-cells = <2>; |
| 137 |
}; |
| 138 |
}; |
| 139 |
|
| 140 |
thermal-zones { |
| 141 |
cpu-thermal { |
| 142 |
/* milliseconds */ |
| 143 |
polling-delay-passive = <250>; |
| 144 |
polling-delay = <1000>; |
| 145 |
thermal-sensors = <&rtp>; |
| 146 |
|
| 147 |
cooling-maps { |
| 148 |
map0 { |
| 149 |
trip = <&cpu_alert0>; |
| 150 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 151 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 152 |
}; |
| 153 |
}; |
| 154 |
|
| 155 |
trips { |
| 156 |
cpu_alert0: cpu-alert0 { |
| 157 |
/* milliCelsius */ |
| 158 |
temperature = <75000>; |
| 159 |
hysteresis = <2000>; |
| 160 |
type = "passive"; |
| 161 |
}; |
| 162 |
|
| 163 |
cpu_crit: cpu-crit { |
| 164 |
/* milliCelsius */ |
| 165 |
temperature = <100000>; |
| 166 |
hysteresis = <2000>; |
| 167 |
type = "critical"; |
| 168 |
}; |
| 169 |
}; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
reserved-memory { |
| 174 |
#address-cells = <1>; |
| 175 |
#size-cells = <1>; |
| 176 |
ranges; |
| 177 |
|
| 178 |
/* Address must be kept in the lower 256 MiBs of DRAM for VE. */ |
| 179 |
default-pool { |
| 180 |
compatible = "shared-dma-pool"; |
| 181 |
size = <0x6000000>; |
| 182 |
alloc-ranges = <0x40000000 0x10000000>; |
| 183 |
reusable; |
| 184 |
linux,cma-default; |
| 185 |
}; |
| 186 |
}; |
| 187 |
|
| 188 |
timer { |
| 189 |
compatible = "arm,armv7-timer"; |
| 190 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 191 |
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 192 |
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 193 |
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 194 |
}; |
| 195 |
|
| 196 |
pmu { |
| 197 |
compatible = "arm,cortex-a7-pmu"; |
| 198 |
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| 199 |
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| 200 |
}; |
| 201 |
|
| 202 |
clocks { |
| 203 |
#address-cells = <1>; |
| 204 |
#size-cells = <1>; |
| 205 |
ranges; |
| 206 |
|
| 207 |
osc24M: clk-24M { |
| 208 |
#clock-cells = <0>; |
| 209 |
compatible = "fixed-clock"; |
| 210 |
clock-frequency = <24000000>; |
| 211 |
clock-output-names = "osc24M"; |
| 212 |
}; |
| 213 |
|
| 214 |
osc32k: clk-32k { |
| 215 |
#clock-cells = <0>; |
| 216 |
compatible = "fixed-clock"; |
| 217 |
clock-frequency = <32768>; |
| 218 |
clock-output-names = "osc32k"; |
| 219 |
}; |
| 220 |
|
| 221 |
/* |
| 222 |
* The following two are dummy clocks, placeholders |
| 223 |
* used in the gmac_tx clock. The gmac driver will |
| 224 |
* choose one parent depending on the PHY interface |
| 225 |
* mode, using clk_set_rate auto-reparenting. |
| 226 |
* |
| 227 |
* The actual TX clock rate is not controlled by the |
| 228 |
* gmac_tx clock. |
| 229 |
*/ |
| 230 |
mii_phy_tx_clk: clk-mii-phy-tx { |
| 231 |
#clock-cells = <0>; |
| 232 |
compatible = "fixed-clock"; |
| 233 |
clock-frequency = <25000000>; |
| 234 |
clock-output-names = "mii_phy_tx"; |
| 235 |
}; |
| 236 |
|
| 237 |
gmac_int_tx_clk: clk-gmac-int-tx { |
| 238 |
#clock-cells = <0>; |
| 239 |
compatible = "fixed-clock"; |
| 240 |
clock-frequency = <125000000>; |
| 241 |
clock-output-names = "gmac_int_tx"; |
| 242 |
}; |
| 243 |
|
| 244 |
gmac_tx_clk: clk@1c20164 { |
| 245 |
#clock-cells = <0>; |
| 246 |
compatible = "allwinner,sun7i-a20-gmac-clk"; |
| 247 |
reg = <0x01c20164 0x4>; |
| 248 |
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; |
| 249 |
clock-output-names = "gmac_tx"; |
| 250 |
}; |
| 251 |
}; |
| 252 |
|
| 253 |
|
| 254 |
de: display-engine { |
| 255 |
compatible = "allwinner,sun7i-a20-display-engine"; |
| 256 |
allwinner,pipelines = <&fe0>, <&fe1>; |
| 257 |
status = "disabled"; |
| 258 |
}; |
| 259 |
|
| 260 |
soc { |
| 261 |
compatible = "simple-bus"; |
| 262 |
#address-cells = <1>; |
| 263 |
#size-cells = <1>; |
| 264 |
ranges; |
| 265 |
|
| 266 |
system-control@1c00000 { |
| 267 |
compatible = "allwinner,sun7i-a20-system-control", |
| 268 |
"allwinner,sun4i-a10-system-control"; |
| 269 |
reg = <0x01c00000 0x30>; |
| 270 |
#address-cells = <1>; |
| 271 |
#size-cells = <1>; |
| 272 |
ranges; |
| 273 |
|
| 274 |
sram_a: sram@0 { |
| 275 |
compatible = "mmio-sram"; |
| 276 |
reg = <0x00000000 0xc000>; |
| 277 |
#address-cells = <1>; |
| 278 |
#size-cells = <1>; |
| 279 |
ranges = <0 0x00000000 0xc000>; |
| 280 |
|
| 281 |
emac_sram: sram-section@8000 { |
| 282 |
compatible = "allwinner,sun7i-a20-sram-a3-a4", |
| 283 |
"allwinner,sun4i-a10-sram-a3-a4"; |
| 284 |
reg = <0x8000 0x4000>; |
| 285 |
status = "disabled"; |
| 286 |
}; |
| 287 |
}; |
| 288 |
|
| 289 |
sram_d: sram@10000 { |
| 290 |
compatible = "mmio-sram"; |
| 291 |
reg = <0x00010000 0x1000>; |
| 292 |
#address-cells = <1>; |
| 293 |
#size-cells = <1>; |
| 294 |
ranges = <0 0x00010000 0x1000>; |
| 295 |
|
| 296 |
otg_sram: sram-section@0 { |
| 297 |
compatible = "allwinner,sun7i-a20-sram-d", |
| 298 |
"allwinner,sun4i-a10-sram-d"; |
| 299 |
reg = <0x0000 0x1000>; |
| 300 |
status = "disabled"; |
| 301 |
}; |
| 302 |
}; |
| 303 |
|
| 304 |
sram_c: sram@1d00000 { |
| 305 |
compatible = "mmio-sram"; |
| 306 |
reg = <0x01d00000 0xd0000>; |
| 307 |
#address-cells = <1>; |
| 308 |
#size-cells = <1>; |
| 309 |
ranges = <0 0x01d00000 0xd0000>; |
| 310 |
|
| 311 |
ve_sram: sram-section@0 { |
| 312 |
compatible = "allwinner,sun7i-a20-sram-c1", |
| 313 |
"allwinner,sun4i-a10-sram-c1"; |
| 314 |
reg = <0x000000 0x80000>; |
| 315 |
}; |
| 316 |
}; |
| 317 |
}; |
| 318 |
|
| 319 |
nmi_intc: interrupt-controller@1c00030 { |
| 320 |
compatible = "allwinner,sun7i-a20-sc-nmi"; |
| 321 |
interrupt-controller; |
| 322 |
#interrupt-cells = <2>; |
| 323 |
reg = <0x01c00030 0x0c>; |
| 324 |
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| 325 |
}; |
| 326 |
|
| 327 |
dma: dma-controller@1c02000 { |
| 328 |
compatible = "allwinner,sun4i-a10-dma"; |
| 329 |
reg = <0x01c02000 0x1000>; |
| 330 |
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 331 |
clocks = <&ccu CLK_AHB_DMA>; |
| 332 |
#dma-cells = <2>; |
| 333 |
}; |
| 334 |
|
| 335 |
nfc: nand-controller@1c03000 { |
| 336 |
compatible = "allwinner,sun4i-a10-nand"; |
| 337 |
reg = <0x01c03000 0x1000>; |
| 338 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 339 |
clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; |
| 340 |
clock-names = "ahb", "mod"; |
| 341 |
dmas = <&dma SUN4I_DMA_DEDICATED 3>; |
| 342 |
dma-names = "rxtx"; |
| 343 |
status = "disabled"; |
| 344 |
#address-cells = <1>; |
| 345 |
#size-cells = <0>; |
| 346 |
}; |
| 347 |
|
| 348 |
spi0: spi@1c05000 { |
| 349 |
compatible = "allwinner,sun4i-a10-spi"; |
| 350 |
reg = <0x01c05000 0x1000>; |
| 351 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 352 |
clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; |
| 353 |
clock-names = "ahb", "mod"; |
| 354 |
dmas = <&dma SUN4I_DMA_DEDICATED 27>, |
| 355 |
<&dma SUN4I_DMA_DEDICATED 26>; |
| 356 |
dma-names = "rx", "tx"; |
| 357 |
status = "disabled"; |
| 358 |
#address-cells = <1>; |
| 359 |
#size-cells = <0>; |
| 360 |
num-cs = <4>; |
| 361 |
}; |
| 362 |
|
| 363 |
spi1: spi@1c06000 { |
| 364 |
compatible = "allwinner,sun4i-a10-spi"; |
| 365 |
reg = <0x01c06000 0x1000>; |
| 366 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 367 |
clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; |
| 368 |
clock-names = "ahb", "mod"; |
| 369 |
dmas = <&dma SUN4I_DMA_DEDICATED 9>, |
| 370 |
<&dma SUN4I_DMA_DEDICATED 8>; |
| 371 |
dma-names = "rx", "tx"; |
| 372 |
status = "disabled"; |
| 373 |
#address-cells = <1>; |
| 374 |
#size-cells = <0>; |
| 375 |
num-cs = <1>; |
| 376 |
}; |
| 377 |
|
| 378 |
csi0: csi@1c09000 { |
| 379 |
compatible = "allwinner,sun7i-a20-csi0"; |
| 380 |
reg = <0x01c09000 0x1000>; |
| 381 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 382 |
clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>; |
| 383 |
clock-names = "bus", "isp", "ram"; |
| 384 |
resets = <&ccu RST_CSI0>; |
| 385 |
status = "disabled"; |
| 386 |
}; |
| 387 |
|
| 388 |
emac: ethernet@1c0b000 { |
| 389 |
compatible = "allwinner,sun4i-a10-emac"; |
| 390 |
reg = <0x01c0b000 0x1000>; |
| 391 |
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| 392 |
clocks = <&ccu CLK_AHB_EMAC>; |
| 393 |
allwinner,sram = <&emac_sram 1>; |
| 394 |
status = "disabled"; |
| 395 |
}; |
| 396 |
|
| 397 |
mdio: mdio@1c0b080 { |
| 398 |
compatible = "allwinner,sun4i-a10-mdio"; |
| 399 |
reg = <0x01c0b080 0x14>; |
| 400 |
status = "disabled"; |
| 401 |
#address-cells = <1>; |
| 402 |
#size-cells = <0>; |
| 403 |
}; |
| 404 |
|
| 405 |
tcon0: lcd-controller@1c0c000 { |
| 406 |
compatible = "allwinner,sun7i-a20-tcon0", |
| 407 |
"allwinner,sun7i-a20-tcon"; |
| 408 |
reg = <0x01c0c000 0x1000>; |
| 409 |
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| 410 |
resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>; |
| 411 |
reset-names = "lcd", "lvds"; |
| 412 |
clocks = <&ccu CLK_AHB_LCD0>, |
| 413 |
<&ccu CLK_TCON0_CH0>, |
| 414 |
<&ccu CLK_TCON0_CH1>; |
| 415 |
clock-names = "ahb", |
| 416 |
"tcon-ch0", |
| 417 |
"tcon-ch1"; |
| 418 |
clock-output-names = "tcon0-pixel-clock"; |
| 419 |
#clock-cells = <0>; |
| 420 |
dmas = <&dma SUN4I_DMA_DEDICATED 14>; |
| 421 |
|
| 422 |
ports { |
| 423 |
#address-cells = <1>; |
| 424 |
#size-cells = <0>; |
| 425 |
|
| 426 |
tcon0_in: port@0 { |
| 427 |
#address-cells = <1>; |
| 428 |
#size-cells = <0>; |
| 429 |
reg = <0>; |
| 430 |
|
| 431 |
tcon0_in_be0: endpoint@0 { |
| 432 |
reg = <0>; |
| 433 |
remote-endpoint = <&be0_out_tcon0>; |
| 434 |
}; |
| 435 |
|
| 436 |
tcon0_in_be1: endpoint@1 { |
| 437 |
reg = <1>; |
| 438 |
remote-endpoint = <&be1_out_tcon0>; |
| 439 |
}; |
| 440 |
}; |
| 441 |
|
| 442 |
tcon0_out: port@1 { |
| 443 |
#address-cells = <1>; |
| 444 |
#size-cells = <0>; |
| 445 |
reg = <1>; |
| 446 |
|
| 447 |
tcon0_out_hdmi: endpoint@1 { |
| 448 |
reg = <1>; |
| 449 |
remote-endpoint = <&hdmi_in_tcon0>; |
| 450 |
allwinner,tcon-channel = <1>; |
| 451 |
}; |
| 452 |
}; |
| 453 |
}; |
| 454 |
}; |
| 455 |
|
| 456 |
tcon1: lcd-controller@1c0d000 { |
| 457 |
compatible = "allwinner,sun7i-a20-tcon1", |
| 458 |
"allwinner,sun7i-a20-tcon"; |
| 459 |
reg = <0x01c0d000 0x1000>; |
| 460 |
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| 461 |
resets = <&ccu RST_TCON1>; |
| 462 |
reset-names = "lcd"; |
| 463 |
clocks = <&ccu CLK_AHB_LCD1>, |
| 464 |
<&ccu CLK_TCON1_CH0>, |
| 465 |
<&ccu CLK_TCON1_CH1>; |
| 466 |
clock-names = "ahb", |
| 467 |
"tcon-ch0", |
| 468 |
"tcon-ch1"; |
| 469 |
clock-output-names = "tcon1-pixel-clock"; |
| 470 |
#clock-cells = <0>; |
| 471 |
dmas = <&dma SUN4I_DMA_DEDICATED 15>; |
| 472 |
|
| 473 |
ports { |
| 474 |
#address-cells = <1>; |
| 475 |
#size-cells = <0>; |
| 476 |
|
| 477 |
tcon1_in: port@0 { |
| 478 |
#address-cells = <1>; |
| 479 |
#size-cells = <0>; |
| 480 |
reg = <0>; |
| 481 |
|
| 482 |
tcon1_in_be0: endpoint@0 { |
| 483 |
reg = <0>; |
| 484 |
remote-endpoint = <&be0_out_tcon1>; |
| 485 |
}; |
| 486 |
|
| 487 |
tcon1_in_be1: endpoint@1 { |
| 488 |
reg = <1>; |
| 489 |
remote-endpoint = <&be1_out_tcon1>; |
| 490 |
}; |
| 491 |
}; |
| 492 |
|
| 493 |
tcon1_out: port@1 { |
| 494 |
#address-cells = <1>; |
| 495 |
#size-cells = <0>; |
| 496 |
reg = <1>; |
| 497 |
|
| 498 |
tcon1_out_hdmi: endpoint@1 { |
| 499 |
reg = <1>; |
| 500 |
remote-endpoint = <&hdmi_in_tcon1>; |
| 501 |
allwinner,tcon-channel = <1>; |
| 502 |
}; |
| 503 |
}; |
| 504 |
}; |
| 505 |
}; |
| 506 |
|
| 507 |
video-codec@1c0e000 { |
| 508 |
compatible = "allwinner,sun7i-a20-video-engine"; |
| 509 |
reg = <0x01c0e000 0x1000>; |
| 510 |
clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, |
| 511 |
<&ccu CLK_DRAM_VE>; |
| 512 |
clock-names = "ahb", "mod", "ram"; |
| 513 |
resets = <&ccu RST_VE>; |
| 514 |
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| 515 |
allwinner,sram = <&ve_sram 1>; |
| 516 |
}; |
| 517 |
|
| 518 |
mmc0: mmc@1c0f000 { |
| 519 |
compatible = "allwinner,sun7i-a20-mmc"; |
| 520 |
reg = <0x01c0f000 0x1000>; |
| 521 |
clocks = <&ccu CLK_AHB_MMC0>, |
| 522 |
<&ccu CLK_MMC0>, |
| 523 |
<&ccu CLK_MMC0_OUTPUT>, |
| 524 |
<&ccu CLK_MMC0_SAMPLE>; |
| 525 |
clock-names = "ahb", |
| 526 |
"mmc", |
| 527 |
"output", |
| 528 |
"sample"; |
| 529 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 530 |
pinctrl-names = "default"; |
| 531 |
pinctrl-0 = <&mmc0_pins>; |
| 532 |
status = "disabled"; |
| 533 |
#address-cells = <1>; |
| 534 |
#size-cells = <0>; |
| 535 |
}; |
| 536 |
|
| 537 |
mmc1: mmc@1c10000 { |
| 538 |
compatible = "allwinner,sun7i-a20-mmc"; |
| 539 |
reg = <0x01c10000 0x1000>; |
| 540 |
clocks = <&ccu CLK_AHB_MMC1>, |
| 541 |
<&ccu CLK_MMC1>, |
| 542 |
<&ccu CLK_MMC1_OUTPUT>, |
| 543 |
<&ccu CLK_MMC1_SAMPLE>; |
| 544 |
clock-names = "ahb", |
| 545 |
"mmc", |
| 546 |
"output", |
| 547 |
"sample"; |
| 548 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 549 |
status = "disabled"; |
| 550 |
#address-cells = <1>; |
| 551 |
#size-cells = <0>; |
| 552 |
}; |
| 553 |
|
| 554 |
mmc2: mmc@1c11000 { |
| 555 |
compatible = "allwinner,sun7i-a20-mmc"; |
| 556 |
reg = <0x01c11000 0x1000>; |
| 557 |
clocks = <&ccu CLK_AHB_MMC2>, |
| 558 |
<&ccu CLK_MMC2>, |
| 559 |
<&ccu CLK_MMC2_OUTPUT>, |
| 560 |
<&ccu CLK_MMC2_SAMPLE>; |
| 561 |
clock-names = "ahb", |
| 562 |
"mmc", |
| 563 |
"output", |
| 564 |
"sample"; |
| 565 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 566 |
pinctrl-names = "default"; |
| 567 |
pinctrl-0 = <&mmc2_pins>; |
| 568 |
status = "disabled"; |
| 569 |
#address-cells = <1>; |
| 570 |
#size-cells = <0>; |
| 571 |
}; |
| 572 |
|
| 573 |
mmc3: mmc@1c12000 { |
| 574 |
compatible = "allwinner,sun7i-a20-mmc"; |
| 575 |
reg = <0x01c12000 0x1000>; |
| 576 |
clocks = <&ccu CLK_AHB_MMC3>, |
| 577 |
<&ccu CLK_MMC3>, |
| 578 |
<&ccu CLK_MMC3_OUTPUT>, |
| 579 |
<&ccu CLK_MMC3_SAMPLE>; |
| 580 |
clock-names = "ahb", |
| 581 |
"mmc", |
| 582 |
"output", |
| 583 |
"sample"; |
| 584 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 585 |
pinctrl-names = "default"; |
| 586 |
pinctrl-0 = <&mmc3_pins>; |
| 587 |
status = "disabled"; |
| 588 |
#address-cells = <1>; |
| 589 |
#size-cells = <0>; |
| 590 |
}; |
| 591 |
|
| 592 |
usb_otg: usb@1c13000 { |
| 593 |
compatible = "allwinner,sun4i-a10-musb"; |
| 594 |
reg = <0x01c13000 0x0400>; |
| 595 |
clocks = <&ccu CLK_AHB_OTG>; |
| 596 |
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 597 |
interrupt-names = "mc"; |
| 598 |
phys = <&usbphy 0>; |
| 599 |
phy-names = "usb"; |
| 600 |
extcon = <&usbphy 0>; |
| 601 |
allwinner,sram = <&otg_sram 1>; |
| 602 |
dr_mode = "otg"; |
| 603 |
status = "disabled"; |
| 604 |
}; |
| 605 |
|
| 606 |
usbphy: phy@1c13400 { |
| 607 |
#phy-cells = <1>; |
| 608 |
compatible = "allwinner,sun7i-a20-usb-phy"; |
| 609 |
reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; |
| 610 |
reg-names = "phy_ctrl", "pmu1", "pmu2"; |
| 611 |
clocks = <&ccu CLK_USB_PHY>; |
| 612 |
clock-names = "usb_phy"; |
| 613 |
resets = <&ccu RST_USB_PHY0>, |
| 614 |
<&ccu RST_USB_PHY1>, |
| 615 |
<&ccu RST_USB_PHY2>; |
| 616 |
reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; |
| 617 |
status = "disabled"; |
| 618 |
}; |
| 619 |
|
| 620 |
ehci0: usb@1c14000 { |
| 621 |
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; |
| 622 |
reg = <0x01c14000 0x100>; |
| 623 |
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 624 |
clocks = <&ccu CLK_AHB_EHCI0>; |
| 625 |
phys = <&usbphy 1>; |
| 626 |
phy-names = "usb"; |
| 627 |
status = "disabled"; |
| 628 |
}; |
| 629 |
|
| 630 |
ohci0: usb@1c14400 { |
| 631 |
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; |
| 632 |
reg = <0x01c14400 0x100>; |
| 633 |
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| 634 |
clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; |
| 635 |
phys = <&usbphy 1>; |
| 636 |
phy-names = "usb"; |
| 637 |
status = "disabled"; |
| 638 |
}; |
| 639 |
|
| 640 |
crypto: crypto-engine@1c15000 { |
| 641 |
compatible = "allwinner,sun7i-a20-crypto", |
| 642 |
"allwinner,sun4i-a10-crypto"; |
| 643 |
reg = <0x01c15000 0x1000>; |
| 644 |
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 645 |
clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; |
| 646 |
clock-names = "ahb", "mod"; |
| 647 |
}; |
| 648 |
|
| 649 |
hdmi: hdmi@1c16000 { |
| 650 |
compatible = "allwinner,sun7i-a20-hdmi", |
| 651 |
"allwinner,sun5i-a10s-hdmi"; |
| 652 |
reg = <0x01c16000 0x1000>; |
| 653 |
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| 654 |
clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, |
| 655 |
<&ccu CLK_PLL_VIDEO0_2X>, |
| 656 |
<&ccu CLK_PLL_VIDEO1_2X>; |
| 657 |
clock-names = "ahb", "mod", "pll-0", "pll-1"; |
| 658 |
dmas = <&dma SUN4I_DMA_NORMAL 16>, |
| 659 |
<&dma SUN4I_DMA_NORMAL 16>, |
| 660 |
<&dma SUN4I_DMA_DEDICATED 24>; |
| 661 |
dma-names = "ddc-tx", "ddc-rx", "audio-tx"; |
| 662 |
status = "disabled"; |
| 663 |
|
| 664 |
ports { |
| 665 |
#address-cells = <1>; |
| 666 |
#size-cells = <0>; |
| 667 |
|
| 668 |
hdmi_in: port@0 { |
| 669 |
#address-cells = <1>; |
| 670 |
#size-cells = <0>; |
| 671 |
reg = <0>; |
| 672 |
|
| 673 |
hdmi_in_tcon0: endpoint@0 { |
| 674 |
reg = <0>; |
| 675 |
remote-endpoint = <&tcon0_out_hdmi>; |
| 676 |
}; |
| 677 |
|
| 678 |
hdmi_in_tcon1: endpoint@1 { |
| 679 |
reg = <1>; |
| 680 |
remote-endpoint = <&tcon1_out_hdmi>; |
| 681 |
}; |
| 682 |
}; |
| 683 |
|
| 684 |
hdmi_out: port@1 { |
| 685 |
reg = <1>; |
| 686 |
}; |
| 687 |
}; |
| 688 |
}; |
| 689 |
|
| 690 |
spi2: spi@1c17000 { |
| 691 |
compatible = "allwinner,sun4i-a10-spi"; |
| 692 |
reg = <0x01c17000 0x1000>; |
| 693 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 694 |
clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; |
| 695 |
clock-names = "ahb", "mod"; |
| 696 |
dmas = <&dma SUN4I_DMA_DEDICATED 29>, |
| 697 |
<&dma SUN4I_DMA_DEDICATED 28>; |
| 698 |
dma-names = "rx", "tx"; |
| 699 |
status = "disabled"; |
| 700 |
#address-cells = <1>; |
| 701 |
#size-cells = <0>; |
| 702 |
num-cs = <1>; |
| 703 |
}; |
| 704 |
|
| 705 |
ahci: sata@1c18000 { |
| 706 |
compatible = "allwinner,sun4i-a10-ahci"; |
| 707 |
reg = <0x01c18000 0x1000>; |
| 708 |
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| 709 |
clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>; |
| 710 |
status = "disabled"; |
| 711 |
}; |
| 712 |
|
| 713 |
ehci1: usb@1c1c000 { |
| 714 |
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; |
| 715 |
reg = <0x01c1c000 0x100>; |
| 716 |
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| 717 |
clocks = <&ccu CLK_AHB_EHCI1>; |
| 718 |
phys = <&usbphy 2>; |
| 719 |
phy-names = "usb"; |
| 720 |
status = "disabled"; |
| 721 |
}; |
| 722 |
|
| 723 |
ohci1: usb@1c1c400 { |
| 724 |
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; |
| 725 |
reg = <0x01c1c400 0x100>; |
| 726 |
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 727 |
clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; |
| 728 |
phys = <&usbphy 2>; |
| 729 |
phy-names = "usb"; |
| 730 |
status = "disabled"; |
| 731 |
}; |
| 732 |
|
| 733 |
csi1: csi@1c1d000 { |
| 734 |
compatible = "allwinner,sun7i-a20-csi1", |
| 735 |
"allwinner,sun4i-a10-csi1"; |
| 736 |
reg = <0x01c1d000 0x1000>; |
| 737 |
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 738 |
clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>; |
| 739 |
clock-names = "bus", "ram"; |
| 740 |
resets = <&ccu RST_CSI1>; |
| 741 |
status = "disabled"; |
| 742 |
}; |
| 743 |
|
| 744 |
spi3: spi@1c1f000 { |
| 745 |
compatible = "allwinner,sun4i-a10-spi"; |
| 746 |
reg = <0x01c1f000 0x1000>; |
| 747 |
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 748 |
clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>; |
| 749 |
clock-names = "ahb", "mod"; |
| 750 |
dmas = <&dma SUN4I_DMA_DEDICATED 31>, |
| 751 |
<&dma SUN4I_DMA_DEDICATED 30>; |
| 752 |
dma-names = "rx", "tx"; |
| 753 |
status = "disabled"; |
| 754 |
#address-cells = <1>; |
| 755 |
#size-cells = <0>; |
| 756 |
num-cs = <1>; |
| 757 |
}; |
| 758 |
|
| 759 |
ccu: clock@1c20000 { |
| 760 |
compatible = "allwinner,sun7i-a20-ccu"; |
| 761 |
reg = <0x01c20000 0x400>; |
| 762 |
clocks = <&osc24M>, <&osc32k>; |
| 763 |
clock-names = "hosc", "losc"; |
| 764 |
#clock-cells = <1>; |
| 765 |
#reset-cells = <1>; |
| 766 |
}; |
| 767 |
|
| 768 |
pio: pinctrl@1c20800 { |
| 769 |
compatible = "allwinner,sun7i-a20-pinctrl"; |
| 770 |
reg = <0x01c20800 0x400>; |
| 771 |
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 772 |
clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; |
| 773 |
clock-names = "apb", "hosc", "losc"; |
| 774 |
gpio-controller; |
| 775 |
interrupt-controller; |
| 776 |
#interrupt-cells = <3>; |
| 777 |
#gpio-cells = <3>; |
| 778 |
|
| 779 |
/omit-if-no-ref/ |
| 780 |
can_pa_pins: can-pa-pins { |
| 781 |
pins = "PA16", "PA17"; |
| 782 |
function = "can"; |
| 783 |
}; |
| 784 |
|
| 785 |
/omit-if-no-ref/ |
| 786 |
can_ph_pins: can-ph-pins { |
| 787 |
pins = "PH20", "PH21"; |
| 788 |
function = "can"; |
| 789 |
}; |
| 790 |
|
| 791 |
/omit-if-no-ref/ |
| 792 |
clk_out_a_pin: clk-out-a-pin { |
| 793 |
pins = "PI12"; |
| 794 |
function = "clk_out_a"; |
| 795 |
}; |
| 796 |
|
| 797 |
/omit-if-no-ref/ |
| 798 |
clk_out_b_pin: clk-out-b-pin { |
| 799 |
pins = "PI13"; |
| 800 |
function = "clk_out_b"; |
| 801 |
}; |
| 802 |
|
| 803 |
/omit-if-no-ref/ |
| 804 |
csi0_8bits_pins: csi-8bits-pins { |
| 805 |
pins = "PE0", "PE2", "PE3", "PE4", "PE5", |
| 806 |
"PE6", "PE7", "PE8", "PE9", "PE10", |
| 807 |
"PE11"; |
| 808 |
function = "csi0"; |
| 809 |
}; |
| 810 |
|
| 811 |
/omit-if-no-ref/ |
| 812 |
csi0_clk_pin: csi-clk-pin { |
| 813 |
pins = "PE1"; |
| 814 |
function = "csi0"; |
| 815 |
}; |
| 816 |
|
| 817 |
/omit-if-no-ref/ |
| 818 |
csi1_8bits_pg_pins: csi1-8bits-pg-pins { |
| 819 |
pins = "PG0", "PG2", "PG3", "PG4", "PG5", |
| 820 |
"PG6", "PG7", "PG8", "PG9", "PG10", |
| 821 |
"PG11"; |
| 822 |
function = "csi1"; |
| 823 |
}; |
| 824 |
|
| 825 |
/omit-if-no-ref/ |
| 826 |
csi1_24bits_ph_pins: csi1-24bits-ph-pins { |
| 827 |
pins = "PH0", "PH1", "PH2", "PH3", "PH4", |
| 828 |
"PH5", "PH6", "PH7", "PH8", "PH9", |
| 829 |
"PH10", "PH11", "PH12", "PH13", "PH14", |
| 830 |
"PH15", "PH16", "PH17", "PH18", "PH19", |
| 831 |
"PH20", "PH21", "PH22", "PH23", "PH24", |
| 832 |
"PH25", "PH26", "PH27"; |
| 833 |
function = "csi1"; |
| 834 |
}; |
| 835 |
|
| 836 |
/omit-if-no-ref/ |
| 837 |
csi1_clk_pg_pin: csi1-clk-pg-pin { |
| 838 |
pins = "PG1"; |
| 839 |
function = "csi1"; |
| 840 |
}; |
| 841 |
|
| 842 |
/omit-if-no-ref/ |
| 843 |
emac_pa_pins: emac-pa-pins { |
| 844 |
pins = "PA0", "PA1", "PA2", |
| 845 |
"PA3", "PA4", "PA5", "PA6", |
| 846 |
"PA7", "PA8", "PA9", "PA10", |
| 847 |
"PA11", "PA12", "PA13", "PA14", |
| 848 |
"PA15", "PA16"; |
| 849 |
function = "emac"; |
| 850 |
}; |
| 851 |
|
| 852 |
/omit-if-no-ref/ |
| 853 |
emac_ph_pins: emac-ph-pins { |
| 854 |
pins = "PH8", "PH9", "PH10", "PH11", |
| 855 |
"PH14", "PH15", "PH16", "PH17", |
| 856 |
"PH18", "PH19", "PH20", "PH21", |
| 857 |
"PH22", "PH23", "PH24", "PH25", |
| 858 |
"PH26"; |
| 859 |
function = "emac"; |
| 860 |
}; |
| 861 |
|
| 862 |
/omit-if-no-ref/ |
| 863 |
gmac_mii_pins: gmac-mii-pins { |
| 864 |
pins = "PA0", "PA1", "PA2", |
| 865 |
"PA3", "PA4", "PA5", "PA6", |
| 866 |
"PA7", "PA8", "PA9", "PA10", |
| 867 |
"PA11", "PA12", "PA13", "PA14", |
| 868 |
"PA15", "PA16"; |
| 869 |
function = "gmac"; |
| 870 |
}; |
| 871 |
|
| 872 |
/omit-if-no-ref/ |
| 873 |
gmac_rgmii_pins: gmac-rgmii-pins { |
| 874 |
pins = "PA0", "PA1", "PA2", |
| 875 |
"PA3", "PA4", "PA5", "PA6", |
| 876 |
"PA7", "PA8", "PA10", |
| 877 |
"PA11", "PA12", "PA13", |
| 878 |
"PA15", "PA16"; |
| 879 |
function = "gmac"; |
| 880 |
/* |
| 881 |
* data lines in RGMII mode use DDR mode |
| 882 |
* and need a higher signal drive strength |
| 883 |
*/ |
| 884 |
drive-strength = <40>; |
| 885 |
}; |
| 886 |
|
| 887 |
/omit-if-no-ref/ |
| 888 |
i2c0_pins: i2c0-pins { |
| 889 |
pins = "PB0", "PB1"; |
| 890 |
function = "i2c0"; |
| 891 |
}; |
| 892 |
|
| 893 |
/omit-if-no-ref/ |
| 894 |
i2c1_pins: i2c1-pins { |
| 895 |
pins = "PB18", "PB19"; |
| 896 |
function = "i2c1"; |
| 897 |
}; |
| 898 |
|
| 899 |
/omit-if-no-ref/ |
| 900 |
i2c2_pins: i2c2-pins { |
| 901 |
pins = "PB20", "PB21"; |
| 902 |
function = "i2c2"; |
| 903 |
}; |
| 904 |
|
| 905 |
/omit-if-no-ref/ |
| 906 |
i2c3_pins: i2c3-pins { |
| 907 |
pins = "PI0", "PI1"; |
| 908 |
function = "i2c3"; |
| 909 |
}; |
| 910 |
|
| 911 |
/omit-if-no-ref/ |
| 912 |
ir0_rx_pin: ir0-rx-pin { |
| 913 |
pins = "PB4"; |
| 914 |
function = "ir0"; |
| 915 |
}; |
| 916 |
|
| 917 |
/omit-if-no-ref/ |
| 918 |
ir0_tx_pin: ir0-tx-pin { |
| 919 |
pins = "PB3"; |
| 920 |
function = "ir0"; |
| 921 |
}; |
| 922 |
|
| 923 |
/omit-if-no-ref/ |
| 924 |
ir1_rx_pin: ir1-rx-pin { |
| 925 |
pins = "PB23"; |
| 926 |
function = "ir1"; |
| 927 |
}; |
| 928 |
|
| 929 |
/omit-if-no-ref/ |
| 930 |
ir1_tx_pin: ir1-tx-pin { |
| 931 |
pins = "PB22"; |
| 932 |
function = "ir1"; |
| 933 |
}; |
| 934 |
|
| 935 |
/omit-if-no-ref/ |
| 936 |
lcd_lvds0_pins: lcd-lvds0-pins { |
| 937 |
pins = "PD0", "PD1", "PD2", "PD3", "PD4", |
| 938 |
"PD5", "PD6", "PD7", "PD8", "PD9"; |
| 939 |
function = "lvds0"; |
| 940 |
}; |
| 941 |
|
| 942 |
/omit-if-no-ref/ |
| 943 |
lcd_lvds1_pins: lcd-lvds1-pins { |
| 944 |
pins = "PD10", "PD11", "PD12", "PD13", "PD14", |
| 945 |
"PD15", "PD16", "PD17", "PD18", "PD19"; |
| 946 |
function = "lvds1"; |
| 947 |
}; |
| 948 |
|
| 949 |
/omit-if-no-ref/ |
| 950 |
mmc0_pins: mmc0-pins { |
| 951 |
pins = "PF0", "PF1", "PF2", |
| 952 |
"PF3", "PF4", "PF5"; |
| 953 |
function = "mmc0"; |
| 954 |
drive-strength = <30>; |
| 955 |
bias-pull-up; |
| 956 |
}; |
| 957 |
|
| 958 |
/omit-if-no-ref/ |
| 959 |
mmc2_pins: mmc2-pins { |
| 960 |
pins = "PC6", "PC7", "PC8", |
| 961 |
"PC9", "PC10", "PC11"; |
| 962 |
function = "mmc2"; |
| 963 |
drive-strength = <30>; |
| 964 |
bias-pull-up; |
| 965 |
}; |
| 966 |
|
| 967 |
/omit-if-no-ref/ |
| 968 |
mmc3_pins: mmc3-pins { |
| 969 |
pins = "PI4", "PI5", "PI6", |
| 970 |
"PI7", "PI8", "PI9"; |
| 971 |
function = "mmc3"; |
| 972 |
drive-strength = <30>; |
| 973 |
bias-pull-up; |
| 974 |
}; |
| 975 |
|
| 976 |
/omit-if-no-ref/ |
| 977 |
ps2_0_pins: ps2-0-pins { |
| 978 |
pins = "PI20", "PI21"; |
| 979 |
function = "ps2"; |
| 980 |
}; |
| 981 |
|
| 982 |
/omit-if-no-ref/ |
| 983 |
ps2_1_ph_pins: ps2-1-ph-pins { |
| 984 |
pins = "PH12", "PH13"; |
| 985 |
function = "ps2"; |
| 986 |
}; |
| 987 |
|
| 988 |
/omit-if-no-ref/ |
| 989 |
pwm0_pin: pwm0-pin { |
| 990 |
pins = "PB2"; |
| 991 |
function = "pwm"; |
| 992 |
}; |
| 993 |
|
| 994 |
/omit-if-no-ref/ |
| 995 |
pwm1_pin: pwm1-pin { |
| 996 |
pins = "PI3"; |
| 997 |
function = "pwm"; |
| 998 |
}; |
| 999 |
|
| 1000 |
/omit-if-no-ref/ |
| 1001 |
spdif_tx_pin: spdif-tx-pin { |
| 1002 |
pins = "PB13"; |
| 1003 |
function = "spdif"; |
| 1004 |
bias-pull-up; |
| 1005 |
}; |
| 1006 |
|
| 1007 |
/omit-if-no-ref/ |
| 1008 |
spi0_pi_pins: spi0-pi-pins { |
| 1009 |
pins = "PI11", "PI12", "PI13"; |
| 1010 |
function = "spi0"; |
| 1011 |
}; |
| 1012 |
|
| 1013 |
/omit-if-no-ref/ |
| 1014 |
spi0_cs0_pi_pin: spi0-cs0-pi-pin { |
| 1015 |
pins = "PI10"; |
| 1016 |
function = "spi0"; |
| 1017 |
}; |
| 1018 |
|
| 1019 |
/omit-if-no-ref/ |
| 1020 |
spi0_cs1_pi_pin: spi0-cs1-pi-pin { |
| 1021 |
pins = "PI14"; |
| 1022 |
function = "spi0"; |
| 1023 |
}; |
| 1024 |
|
| 1025 |
/omit-if-no-ref/ |
| 1026 |
spi1_pi_pins: spi1-pi-pins { |
| 1027 |
pins = "PI17", "PI18", "PI19"; |
| 1028 |
function = "spi1"; |
| 1029 |
}; |
| 1030 |
|
| 1031 |
/omit-if-no-ref/ |
| 1032 |
spi1_cs0_pi_pin: spi1-cs0-pi-pin { |
| 1033 |
pins = "PI16"; |
| 1034 |
function = "spi1"; |
| 1035 |
}; |
| 1036 |
|
| 1037 |
/omit-if-no-ref/ |
| 1038 |
spi2_pb_pins: spi2-pb-pins { |
| 1039 |
pins = "PB15", "PB16", "PB17"; |
| 1040 |
function = "spi2"; |
| 1041 |
}; |
| 1042 |
|
| 1043 |
/omit-if-no-ref/ |
| 1044 |
spi2_cs0_pb_pin: spi2-cs0-pb-pin { |
| 1045 |
pins = "PB14"; |
| 1046 |
function = "spi2"; |
| 1047 |
}; |
| 1048 |
|
| 1049 |
/omit-if-no-ref/ |
| 1050 |
spi2_pc_pins: spi2-pc-pins { |
| 1051 |
pins = "PC20", "PC21", "PC22"; |
| 1052 |
function = "spi2"; |
| 1053 |
}; |
| 1054 |
|
| 1055 |
/omit-if-no-ref/ |
| 1056 |
spi2_cs0_pc_pin: spi2-cs0-pc-pin { |
| 1057 |
pins = "PC19"; |
| 1058 |
function = "spi2"; |
| 1059 |
}; |
| 1060 |
|
| 1061 |
/omit-if-no-ref/ |
| 1062 |
uart0_pb_pins: uart0-pb-pins { |
| 1063 |
pins = "PB22", "PB23"; |
| 1064 |
function = "uart0"; |
| 1065 |
}; |
| 1066 |
|
| 1067 |
/omit-if-no-ref/ |
| 1068 |
uart0_pf_pins: uart0-pf-pins { |
| 1069 |
pins = "PF2", "PF4"; |
| 1070 |
function = "uart0"; |
| 1071 |
}; |
| 1072 |
|
| 1073 |
/omit-if-no-ref/ |
| 1074 |
uart1_pa_pins: uart1-pa-pins { |
| 1075 |
pins = "PA10", "PA11"; |
| 1076 |
function = "uart1"; |
| 1077 |
}; |
| 1078 |
|
| 1079 |
/omit-if-no-ref/ |
| 1080 |
uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins { |
| 1081 |
pins = "PA12", "PA13"; |
| 1082 |
function = "uart1"; |
| 1083 |
}; |
| 1084 |
|
| 1085 |
/omit-if-no-ref/ |
| 1086 |
uart2_pa_pins: uart2-pa-pins { |
| 1087 |
pins = "PA2", "PA3"; |
| 1088 |
function = "uart2"; |
| 1089 |
}; |
| 1090 |
|
| 1091 |
/omit-if-no-ref/ |
| 1092 |
uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins { |
| 1093 |
pins = "PA0", "PA1"; |
| 1094 |
function = "uart2"; |
| 1095 |
}; |
| 1096 |
|
| 1097 |
/omit-if-no-ref/ |
| 1098 |
uart2_pi_pins: uart2-pi-pins { |
| 1099 |
pins = "PI18", "PI19"; |
| 1100 |
function = "uart2"; |
| 1101 |
}; |
| 1102 |
|
| 1103 |
/omit-if-no-ref/ |
| 1104 |
uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins { |
| 1105 |
pins = "PI16", "PI17"; |
| 1106 |
function = "uart2"; |
| 1107 |
}; |
| 1108 |
|
| 1109 |
/omit-if-no-ref/ |
| 1110 |
uart3_pg_pins: uart3-pg-pins { |
| 1111 |
pins = "PG6", "PG7"; |
| 1112 |
function = "uart3"; |
| 1113 |
}; |
| 1114 |
|
| 1115 |
/omit-if-no-ref/ |
| 1116 |
uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { |
| 1117 |
pins = "PG8", "PG9"; |
| 1118 |
function = "uart3"; |
| 1119 |
}; |
| 1120 |
|
| 1121 |
/omit-if-no-ref/ |
| 1122 |
uart3_ph_pins: uart3-ph-pins { |
| 1123 |
pins = "PH0", "PH1"; |
| 1124 |
function = "uart3"; |
| 1125 |
}; |
| 1126 |
|
| 1127 |
/omit-if-no-ref/ |
| 1128 |
uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins { |
| 1129 |
pins = "PH2", "PH3"; |
| 1130 |
function = "uart3"; |
| 1131 |
}; |
| 1132 |
|
| 1133 |
/omit-if-no-ref/ |
| 1134 |
uart4_pg_pins: uart4-pg-pins { |
| 1135 |
pins = "PG10", "PG11"; |
| 1136 |
function = "uart4"; |
| 1137 |
}; |
| 1138 |
|
| 1139 |
/omit-if-no-ref/ |
| 1140 |
uart4_ph_pins: uart4-ph-pins { |
| 1141 |
pins = "PH4", "PH5"; |
| 1142 |
function = "uart4"; |
| 1143 |
}; |
| 1144 |
|
| 1145 |
/omit-if-no-ref/ |
| 1146 |
uart5_ph_pins: uart5-ph-pins { |
| 1147 |
pins = "PH6", "PH7"; |
| 1148 |
function = "uart5"; |
| 1149 |
}; |
| 1150 |
|
| 1151 |
/omit-if-no-ref/ |
| 1152 |
uart5_pi_pins: uart5-pi-pins { |
| 1153 |
pins = "PI10", "PI11"; |
| 1154 |
function = "uart5"; |
| 1155 |
}; |
| 1156 |
|
| 1157 |
/omit-if-no-ref/ |
| 1158 |
uart6_pa_pins: uart6-pa-pins { |
| 1159 |
pins = "PA12", "PA13"; |
| 1160 |
function = "uart6"; |
| 1161 |
}; |
| 1162 |
|
| 1163 |
/omit-if-no-ref/ |
| 1164 |
uart6_pi_pins: uart6-pi-pins { |
| 1165 |
pins = "PI12", "PI13"; |
| 1166 |
function = "uart6"; |
| 1167 |
}; |
| 1168 |
|
| 1169 |
/omit-if-no-ref/ |
| 1170 |
uart7_pa_pins: uart7-pa-pins { |
| 1171 |
pins = "PA14", "PA15"; |
| 1172 |
function = "uart7"; |
| 1173 |
}; |
| 1174 |
|
| 1175 |
/omit-if-no-ref/ |
| 1176 |
uart7_pi_pins: uart7-pi-pins { |
| 1177 |
pins = "PI20", "PI21"; |
| 1178 |
function = "uart7"; |
| 1179 |
}; |
| 1180 |
}; |
| 1181 |
|
| 1182 |
timer@1c20c00 { |
| 1183 |
compatible = "allwinner,sun4i-a10-timer"; |
| 1184 |
reg = <0x01c20c00 0x90>; |
| 1185 |
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, |
| 1186 |
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, |
| 1187 |
<GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, |
| 1188 |
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, |
| 1189 |
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, |
| 1190 |
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| 1191 |
clocks = <&osc24M>; |
| 1192 |
}; |
| 1193 |
|
| 1194 |
wdt: watchdog@1c20c90 { |
| 1195 |
compatible = "allwinner,sun4i-a10-wdt"; |
| 1196 |
reg = <0x01c20c90 0x10>; |
| 1197 |
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 1198 |
clocks = <&osc24M>; |
| 1199 |
}; |
| 1200 |
|
| 1201 |
rtc: rtc@1c20d00 { |
| 1202 |
compatible = "allwinner,sun7i-a20-rtc"; |
| 1203 |
reg = <0x01c20d00 0x20>; |
| 1204 |
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 1205 |
}; |
| 1206 |
|
| 1207 |
pwm: pwm@1c20e00 { |
| 1208 |
compatible = "allwinner,sun7i-a20-pwm"; |
| 1209 |
reg = <0x01c20e00 0xc>; |
| 1210 |
clocks = <&osc24M>; |
| 1211 |
#pwm-cells = <3>; |
| 1212 |
status = "disabled"; |
| 1213 |
}; |
| 1214 |
|
| 1215 |
spdif: spdif@1c21000 { |
| 1216 |
#sound-dai-cells = <0>; |
| 1217 |
compatible = "allwinner,sun4i-a10-spdif"; |
| 1218 |
reg = <0x01c21000 0x400>; |
| 1219 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 1220 |
clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; |
| 1221 |
clock-names = "apb", "spdif"; |
| 1222 |
dmas = <&dma SUN4I_DMA_NORMAL 2>, |
| 1223 |
<&dma SUN4I_DMA_NORMAL 2>; |
| 1224 |
dma-names = "rx", "tx"; |
| 1225 |
status = "disabled"; |
| 1226 |
}; |
| 1227 |
|
| 1228 |
ir0: ir@1c21800 { |
| 1229 |
compatible = "allwinner,sun4i-a10-ir"; |
| 1230 |
clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>; |
| 1231 |
clock-names = "apb", "ir"; |
| 1232 |
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| 1233 |
reg = <0x01c21800 0x40>; |
| 1234 |
status = "disabled"; |
| 1235 |
}; |
| 1236 |
|
| 1237 |
ir1: ir@1c21c00 { |
| 1238 |
compatible = "allwinner,sun4i-a10-ir"; |
| 1239 |
clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>; |
| 1240 |
clock-names = "apb", "ir"; |
| 1241 |
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 1242 |
reg = <0x01c21c00 0x40>; |
| 1243 |
status = "disabled"; |
| 1244 |
}; |
| 1245 |
|
| 1246 |
i2s1: i2s@1c22000 { |
| 1247 |
#sound-dai-cells = <0>; |
| 1248 |
compatible = "allwinner,sun4i-a10-i2s"; |
| 1249 |
reg = <0x01c22000 0x400>; |
| 1250 |
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| 1251 |
clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>; |
| 1252 |
clock-names = "apb", "mod"; |
| 1253 |
dmas = <&dma SUN4I_DMA_NORMAL 4>, |
| 1254 |
<&dma SUN4I_DMA_NORMAL 4>; |
| 1255 |
dma-names = "rx", "tx"; |
| 1256 |
status = "disabled"; |
| 1257 |
}; |
| 1258 |
|
| 1259 |
i2s0: i2s@1c22400 { |
| 1260 |
#sound-dai-cells = <0>; |
| 1261 |
compatible = "allwinner,sun4i-a10-i2s"; |
| 1262 |
reg = <0x01c22400 0x400>; |
| 1263 |
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| 1264 |
clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>; |
| 1265 |
clock-names = "apb", "mod"; |
| 1266 |
dmas = <&dma SUN4I_DMA_NORMAL 3>, |
| 1267 |
<&dma SUN4I_DMA_NORMAL 3>; |
| 1268 |
dma-names = "rx", "tx"; |
| 1269 |
status = "disabled"; |
| 1270 |
}; |
| 1271 |
|
| 1272 |
lradc: lradc@1c22800 { |
| 1273 |
compatible = "allwinner,sun4i-a10-lradc-keys"; |
| 1274 |
reg = <0x01c22800 0x100>; |
| 1275 |
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| 1276 |
status = "disabled"; |
| 1277 |
}; |
| 1278 |
|
| 1279 |
codec: codec@1c22c00 { |
| 1280 |
#sound-dai-cells = <0>; |
| 1281 |
compatible = "allwinner,sun7i-a20-codec"; |
| 1282 |
reg = <0x01c22c00 0x40>; |
| 1283 |
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| 1284 |
clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; |
| 1285 |
clock-names = "apb", "codec"; |
| 1286 |
dmas = <&dma SUN4I_DMA_NORMAL 19>, |
| 1287 |
<&dma SUN4I_DMA_NORMAL 19>; |
| 1288 |
dma-names = "rx", "tx"; |
| 1289 |
status = "disabled"; |
| 1290 |
}; |
| 1291 |
|
| 1292 |
sid: eeprom@1c23800 { |
| 1293 |
compatible = "allwinner,sun7i-a20-sid"; |
| 1294 |
reg = <0x01c23800 0x200>; |
| 1295 |
}; |
| 1296 |
|
| 1297 |
i2s2: i2s@1c24400 { |
| 1298 |
#sound-dai-cells = <0>; |
| 1299 |
compatible = "allwinner,sun4i-a10-i2s"; |
| 1300 |
reg = <0x01c24400 0x400>; |
| 1301 |
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| 1302 |
clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>; |
| 1303 |
clock-names = "apb", "mod"; |
| 1304 |
dmas = <&dma SUN4I_DMA_NORMAL 6>, |
| 1305 |
<&dma SUN4I_DMA_NORMAL 6>; |
| 1306 |
dma-names = "rx", "tx"; |
| 1307 |
status = "disabled"; |
| 1308 |
}; |
| 1309 |
|
| 1310 |
rtp: rtp@1c25000 { |
| 1311 |
compatible = "allwinner,sun5i-a13-ts"; |
| 1312 |
reg = <0x01c25000 0x100>; |
| 1313 |
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 1314 |
#thermal-sensor-cells = <0>; |
| 1315 |
}; |
| 1316 |
|
| 1317 |
uart0: serial@1c28000 { |
| 1318 |
compatible = "snps,dw-apb-uart"; |
| 1319 |
reg = <0x01c28000 0x400>; |
| 1320 |
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 1321 |
reg-shift = <2>; |
| 1322 |
reg-io-width = <4>; |
| 1323 |
clocks = <&ccu CLK_APB1_UART0>; |
| 1324 |
status = "disabled"; |
| 1325 |
}; |
| 1326 |
|
| 1327 |
uart1: serial@1c28400 { |
| 1328 |
compatible = "snps,dw-apb-uart"; |
| 1329 |
reg = <0x01c28400 0x400>; |
| 1330 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 1331 |
reg-shift = <2>; |
| 1332 |
reg-io-width = <4>; |
| 1333 |
clocks = <&ccu CLK_APB1_UART1>; |
| 1334 |
status = "disabled"; |
| 1335 |
}; |
| 1336 |
|
| 1337 |
uart2: serial@1c28800 { |
| 1338 |
compatible = "snps,dw-apb-uart"; |
| 1339 |
reg = <0x01c28800 0x400>; |
| 1340 |
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 1341 |
reg-shift = <2>; |
| 1342 |
reg-io-width = <4>; |
| 1343 |
clocks = <&ccu CLK_APB1_UART2>; |
| 1344 |
status = "disabled"; |
| 1345 |
}; |
| 1346 |
|
| 1347 |
uart3: serial@1c28c00 { |
| 1348 |
compatible = "snps,dw-apb-uart"; |
| 1349 |
reg = <0x01c28c00 0x400>; |
| 1350 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 1351 |
reg-shift = <2>; |
| 1352 |
reg-io-width = <4>; |
| 1353 |
clocks = <&ccu CLK_APB1_UART3>; |
| 1354 |
status = "disabled"; |
| 1355 |
}; |
| 1356 |
|
| 1357 |
uart4: serial@1c29000 { |
| 1358 |
compatible = "snps,dw-apb-uart"; |
| 1359 |
reg = <0x01c29000 0x400>; |
| 1360 |
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| 1361 |
reg-shift = <2>; |
| 1362 |
reg-io-width = <4>; |
| 1363 |
clocks = <&ccu CLK_APB1_UART4>; |
| 1364 |
status = "disabled"; |
| 1365 |
}; |
| 1366 |
|
| 1367 |
uart5: serial@1c29400 { |
| 1368 |
compatible = "snps,dw-apb-uart"; |
| 1369 |
reg = <0x01c29400 0x400>; |
| 1370 |
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| 1371 |
reg-shift = <2>; |
| 1372 |
reg-io-width = <4>; |
| 1373 |
clocks = <&ccu CLK_APB1_UART5>; |
| 1374 |
status = "disabled"; |
| 1375 |
}; |
| 1376 |
|
| 1377 |
uart6: serial@1c29800 { |
| 1378 |
compatible = "snps,dw-apb-uart"; |
| 1379 |
reg = <0x01c29800 0x400>; |
| 1380 |
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| 1381 |
reg-shift = <2>; |
| 1382 |
reg-io-width = <4>; |
| 1383 |
clocks = <&ccu CLK_APB1_UART6>; |
| 1384 |
status = "disabled"; |
| 1385 |
}; |
| 1386 |
|
| 1387 |
uart7: serial@1c29c00 { |
| 1388 |
compatible = "snps,dw-apb-uart"; |
| 1389 |
reg = <0x01c29c00 0x400>; |
| 1390 |
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| 1391 |
reg-shift = <2>; |
| 1392 |
reg-io-width = <4>; |
| 1393 |
clocks = <&ccu CLK_APB1_UART7>; |
| 1394 |
status = "disabled"; |
| 1395 |
}; |
| 1396 |
|
| 1397 |
ps20: ps2@1c2a000 { |
| 1398 |
compatible = "allwinner,sun4i-a10-ps2"; |
| 1399 |
reg = <0x01c2a000 0x400>; |
| 1400 |
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| 1401 |
clocks = <&ccu CLK_APB1_PS20>; |
| 1402 |
status = "disabled"; |
| 1403 |
}; |
| 1404 |
|
| 1405 |
ps21: ps2@1c2a400 { |
| 1406 |
compatible = "allwinner,sun4i-a10-ps2"; |
| 1407 |
reg = <0x01c2a400 0x400>; |
| 1408 |
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| 1409 |
clocks = <&ccu CLK_APB1_PS21>; |
| 1410 |
status = "disabled"; |
| 1411 |
}; |
| 1412 |
|
| 1413 |
i2c0: i2c@1c2ac00 { |
| 1414 |
compatible = "allwinner,sun7i-a20-i2c", |
| 1415 |
"allwinner,sun4i-a10-i2c"; |
| 1416 |
reg = <0x01c2ac00 0x400>; |
| 1417 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 1418 |
clocks = <&ccu CLK_APB1_I2C0>; |
| 1419 |
pinctrl-names = "default"; |
| 1420 |
pinctrl-0 = <&i2c0_pins>; |
| 1421 |
status = "disabled"; |
| 1422 |
#address-cells = <1>; |
| 1423 |
#size-cells = <0>; |
| 1424 |
}; |
| 1425 |
|
| 1426 |
i2c1: i2c@1c2b000 { |
| 1427 |
compatible = "allwinner,sun7i-a20-i2c", |
| 1428 |
"allwinner,sun4i-a10-i2c"; |
| 1429 |
reg = <0x01c2b000 0x400>; |
| 1430 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| 1431 |
clocks = <&ccu CLK_APB1_I2C1>; |
| 1432 |
pinctrl-names = "default"; |
| 1433 |
pinctrl-0 = <&i2c1_pins>; |
| 1434 |
status = "disabled"; |
| 1435 |
#address-cells = <1>; |
| 1436 |
#size-cells = <0>; |
| 1437 |
}; |
| 1438 |
|
| 1439 |
i2c2: i2c@1c2b400 { |
| 1440 |
compatible = "allwinner,sun7i-a20-i2c", |
| 1441 |
"allwinner,sun4i-a10-i2c"; |
| 1442 |
reg = <0x01c2b400 0x400>; |
| 1443 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 1444 |
clocks = <&ccu CLK_APB1_I2C2>; |
| 1445 |
pinctrl-names = "default"; |
| 1446 |
pinctrl-0 = <&i2c2_pins>; |
| 1447 |
status = "disabled"; |
| 1448 |
#address-cells = <1>; |
| 1449 |
#size-cells = <0>; |
| 1450 |
}; |
| 1451 |
|
| 1452 |
i2c3: i2c@1c2b800 { |
| 1453 |
compatible = "allwinner,sun7i-a20-i2c", |
| 1454 |
"allwinner,sun4i-a10-i2c"; |
| 1455 |
reg = <0x01c2b800 0x400>; |
| 1456 |
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| 1457 |
clocks = <&ccu CLK_APB1_I2C3>; |
| 1458 |
pinctrl-names = "default"; |
| 1459 |
pinctrl-0 = <&i2c3_pins>; |
| 1460 |
status = "disabled"; |
| 1461 |
#address-cells = <1>; |
| 1462 |
#size-cells = <0>; |
| 1463 |
}; |
| 1464 |
|
| 1465 |
can0: can@1c2bc00 { |
| 1466 |
compatible = "allwinner,sun7i-a20-can", |
| 1467 |
"allwinner,sun4i-a10-can"; |
| 1468 |
reg = <0x01c2bc00 0x400>; |
| 1469 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 1470 |
clocks = <&ccu CLK_APB1_CAN>; |
| 1471 |
status = "disabled"; |
| 1472 |
}; |
| 1473 |
|
| 1474 |
i2c4: i2c@1c2c000 { |
| 1475 |
compatible = "allwinner,sun7i-a20-i2c", |
| 1476 |
"allwinner,sun4i-a10-i2c"; |
| 1477 |
reg = <0x01c2c000 0x400>; |
| 1478 |
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| 1479 |
clocks = <&ccu CLK_APB1_I2C4>; |
| 1480 |
status = "disabled"; |
| 1481 |
#address-cells = <1>; |
| 1482 |
#size-cells = <0>; |
| 1483 |
}; |
| 1484 |
|
| 1485 |
mali: gpu@1c40000 { |
| 1486 |
compatible = "allwinner,sun7i-a20-mali", "arm,mali-400"; |
| 1487 |
reg = <0x01c40000 0x10000>; |
| 1488 |
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
| 1489 |
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| 1490 |
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, |
| 1491 |
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| 1492 |
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| 1493 |
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, |
| 1494 |
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 1495 |
interrupt-names = "gp", |
| 1496 |
"gpmmu", |
| 1497 |
"pp0", |
| 1498 |
"ppmmu0", |
| 1499 |
"pp1", |
| 1500 |
"ppmmu1", |
| 1501 |
"pmu"; |
| 1502 |
clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; |
| 1503 |
clock-names = "bus", "core"; |
| 1504 |
resets = <&ccu RST_GPU>; |
| 1505 |
|
| 1506 |
assigned-clocks = <&ccu CLK_GPU>; |
| 1507 |
assigned-clock-rates = <384000000>; |
| 1508 |
}; |
| 1509 |
|
| 1510 |
gmac: ethernet@1c50000 { |
| 1511 |
compatible = "allwinner,sun7i-a20-gmac"; |
| 1512 |
reg = <0x01c50000 0x10000>; |
| 1513 |
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| 1514 |
interrupt-names = "macirq"; |
| 1515 |
clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>; |
| 1516 |
clock-names = "stmmaceth", "allwinner_gmac_tx"; |
| 1517 |
snps,pbl = <2>; |
| 1518 |
snps,fixed-burst; |
| 1519 |
snps,force_sf_dma_mode; |
| 1520 |
status = "disabled"; |
| 1521 |
|
| 1522 |
gmac_mdio: mdio { |
| 1523 |
compatible = "snps,dwmac-mdio"; |
| 1524 |
#address-cells = <1>; |
| 1525 |
#size-cells = <0>; |
| 1526 |
}; |
| 1527 |
}; |
| 1528 |
|
| 1529 |
hstimer@1c60000 { |
| 1530 |
compatible = "allwinner,sun7i-a20-hstimer"; |
| 1531 |
reg = <0x01c60000 0x1000>; |
| 1532 |
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, |
| 1533 |
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, |
| 1534 |
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, |
| 1535 |
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 1536 |
clocks = <&ccu CLK_AHB_HSTIMER>; |
| 1537 |
}; |
| 1538 |
|
| 1539 |
gic: interrupt-controller@1c81000 { |
| 1540 |
compatible = "arm,gic-400"; |
| 1541 |
reg = <0x01c81000 0x1000>, |
| 1542 |
<0x01c82000 0x2000>, |
| 1543 |
<0x01c84000 0x2000>, |
| 1544 |
<0x01c86000 0x2000>; |
| 1545 |
interrupt-controller; |
| 1546 |
#interrupt-cells = <3>; |
| 1547 |
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 1548 |
}; |
| 1549 |
|
| 1550 |
fe0: display-frontend@1e00000 { |
| 1551 |
compatible = "allwinner,sun7i-a20-display-frontend"; |
| 1552 |
reg = <0x01e00000 0x20000>; |
| 1553 |
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| 1554 |
clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>, |
| 1555 |
<&ccu CLK_DRAM_DE_FE0>; |
| 1556 |
clock-names = "ahb", "mod", |
| 1557 |
"ram"; |
| 1558 |
resets = <&ccu RST_DE_FE0>; |
| 1559 |
|
| 1560 |
ports { |
| 1561 |
#address-cells = <1>; |
| 1562 |
#size-cells = <0>; |
| 1563 |
|
| 1564 |
fe0_out: port@1 { |
| 1565 |
#address-cells = <1>; |
| 1566 |
#size-cells = <0>; |
| 1567 |
reg = <1>; |
| 1568 |
|
| 1569 |
fe0_out_be0: endpoint@0 { |
| 1570 |
reg = <0>; |
| 1571 |
remote-endpoint = <&be0_in_fe0>; |
| 1572 |
}; |
| 1573 |
|
| 1574 |
fe0_out_be1: endpoint@1 { |
| 1575 |
reg = <1>; |
| 1576 |
remote-endpoint = <&be1_in_fe0>; |
| 1577 |
}; |
| 1578 |
}; |
| 1579 |
}; |
| 1580 |
}; |
| 1581 |
|
| 1582 |
fe1: display-frontend@1e20000 { |
| 1583 |
compatible = "allwinner,sun7i-a20-display-frontend"; |
| 1584 |
reg = <0x01e20000 0x20000>; |
| 1585 |
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| 1586 |
clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>, |
| 1587 |
<&ccu CLK_DRAM_DE_FE1>; |
| 1588 |
clock-names = "ahb", "mod", |
| 1589 |
"ram"; |
| 1590 |
resets = <&ccu RST_DE_FE1>; |
| 1591 |
|
| 1592 |
ports { |
| 1593 |
#address-cells = <1>; |
| 1594 |
#size-cells = <0>; |
| 1595 |
|
| 1596 |
fe1_out: port@1 { |
| 1597 |
#address-cells = <1>; |
| 1598 |
#size-cells = <0>; |
| 1599 |
reg = <1>; |
| 1600 |
|
| 1601 |
fe1_out_be0: endpoint@0 { |
| 1602 |
reg = <0>; |
| 1603 |
remote-endpoint = <&be0_in_fe1>; |
| 1604 |
}; |
| 1605 |
|
| 1606 |
fe1_out_be1: endpoint@1 { |
| 1607 |
reg = <1>; |
| 1608 |
remote-endpoint = <&be1_in_fe1>; |
| 1609 |
}; |
| 1610 |
}; |
| 1611 |
}; |
| 1612 |
}; |
| 1613 |
|
| 1614 |
be1: display-backend@1e40000 { |
| 1615 |
compatible = "allwinner,sun7i-a20-display-backend"; |
| 1616 |
reg = <0x01e40000 0x10000>; |
| 1617 |
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| 1618 |
clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>, |
| 1619 |
<&ccu CLK_DRAM_DE_BE1>; |
| 1620 |
clock-names = "ahb", "mod", |
| 1621 |
"ram"; |
| 1622 |
resets = <&ccu RST_DE_BE1>; |
| 1623 |
|
| 1624 |
ports { |
| 1625 |
#address-cells = <1>; |
| 1626 |
#size-cells = <0>; |
| 1627 |
|
| 1628 |
be1_in: port@0 { |
| 1629 |
#address-cells = <1>; |
| 1630 |
#size-cells = <0>; |
| 1631 |
reg = <0>; |
| 1632 |
|
| 1633 |
be1_in_fe0: endpoint@0 { |
| 1634 |
reg = <0>; |
| 1635 |
remote-endpoint = <&fe0_out_be1>; |
| 1636 |
}; |
| 1637 |
|
| 1638 |
be1_in_fe1: endpoint@1 { |
| 1639 |
reg = <1>; |
| 1640 |
remote-endpoint = <&fe1_out_be1>; |
| 1641 |
}; |
| 1642 |
}; |
| 1643 |
|
| 1644 |
be1_out: port@1 { |
| 1645 |
#address-cells = <1>; |
| 1646 |
#size-cells = <0>; |
| 1647 |
reg = <1>; |
| 1648 |
|
| 1649 |
be1_out_tcon0: endpoint@0 { |
| 1650 |
reg = <0>; |
| 1651 |
remote-endpoint = <&tcon0_in_be1>; |
| 1652 |
}; |
| 1653 |
|
| 1654 |
be1_out_tcon1: endpoint@1 { |
| 1655 |
reg = <1>; |
| 1656 |
remote-endpoint = <&tcon1_in_be1>; |
| 1657 |
}; |
| 1658 |
}; |
| 1659 |
}; |
| 1660 |
}; |
| 1661 |
|
| 1662 |
be0: display-backend@1e60000 { |
| 1663 |
compatible = "allwinner,sun7i-a20-display-backend"; |
| 1664 |
reg = <0x01e60000 0x10000>; |
| 1665 |
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| 1666 |
clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, |
| 1667 |
<&ccu CLK_DRAM_DE_BE0>; |
| 1668 |
clock-names = "ahb", "mod", |
| 1669 |
"ram"; |
| 1670 |
resets = <&ccu RST_DE_BE0>; |
| 1671 |
|
| 1672 |
ports { |
| 1673 |
#address-cells = <1>; |
| 1674 |
#size-cells = <0>; |
| 1675 |
|
| 1676 |
be0_in: port@0 { |
| 1677 |
#address-cells = <1>; |
| 1678 |
#size-cells = <0>; |
| 1679 |
reg = <0>; |
| 1680 |
|
| 1681 |
be0_in_fe0: endpoint@0 { |
| 1682 |
reg = <0>; |
| 1683 |
remote-endpoint = <&fe0_out_be0>; |
| 1684 |
}; |
| 1685 |
|
| 1686 |
be0_in_fe1: endpoint@1 { |
| 1687 |
reg = <1>; |
| 1688 |
remote-endpoint = <&fe1_out_be0>; |
| 1689 |
}; |
| 1690 |
}; |
| 1691 |
|
| 1692 |
be0_out: port@1 { |
| 1693 |
#address-cells = <1>; |
| 1694 |
#size-cells = <0>; |
| 1695 |
reg = <1>; |
| 1696 |
|
| 1697 |
be0_out_tcon0: endpoint@0 { |
| 1698 |
reg = <0>; |
| 1699 |
remote-endpoint = <&tcon0_in_be0>; |
| 1700 |
}; |
| 1701 |
|
| 1702 |
be0_out_tcon1: endpoint@1 { |
| 1703 |
reg = <1>; |
| 1704 |
remote-endpoint = <&tcon1_in_be0>; |
| 1705 |
}; |
| 1706 |
}; |
| 1707 |
}; |
| 1708 |
}; |
| 1709 |
}; |
| 1710 |
}; |