| 1 |
/* |
| 2 |
* Copyright 2017 Chen-Yu Tsai <[email protected]> |
| 3 |
* Copyright 2017 Icenowy Zheng <[email protected]> |
| 4 |
* |
| 5 |
* This file is dual-licensed: you can use it either under the terms |
| 6 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 7 |
* licensing only applies to this file, and not this project as a |
| 8 |
* whole. |
| 9 |
* |
| 10 |
* a) This file is free software; you can redistribute it and/or |
| 11 |
* modify it under the terms of the GNU General Public License as |
| 12 |
* published by the Free Software Foundation; either version 2 of the |
| 13 |
* License, or (at your option) any later version. |
| 14 |
* |
| 15 |
* This file is distributed in the hope that it will be useful, |
| 16 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 18 |
* GNU General Public License for more details. |
| 19 |
* |
| 20 |
* Or, alternatively, |
| 21 |
* |
| 22 |
* b) Permission is hereby granted, free of charge, to any person |
| 23 |
* obtaining a copy of this software and associated documentation |
| 24 |
* files (the "Software"), to deal in the Software without |
| 25 |
* restriction, including without limitation the rights to use, |
| 26 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 27 |
* sell copies of the Software, and to permit persons to whom the |
| 28 |
* Software is furnished to do so, subject to the following |
| 29 |
* conditions: |
| 30 |
* |
| 31 |
* The above copyright notice and this permission notice shall be |
| 32 |
* included in all copies or substantial portions of the Software. |
| 33 |
* |
| 34 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 35 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 36 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 37 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 38 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 39 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 40 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 41 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 42 |
*/ |
| 43 |
|
| 44 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 45 |
#include <dt-bindings/clock/sun6i-rtc.h> |
| 46 |
#include <dt-bindings/clock/sun8i-de2.h> |
| 47 |
#include <dt-bindings/clock/sun8i-r40-ccu.h> |
| 48 |
#include <dt-bindings/clock/sun8i-tcon-top.h> |
| 49 |
#include <dt-bindings/reset/sun8i-r40-ccu.h> |
| 50 |
#include <dt-bindings/reset/sun8i-de2.h> |
| 51 |
#include <dt-bindings/thermal/thermal.h> |
| 52 |
|
| 53 |
/ { |
| 54 |
#address-cells = <1>; |
| 55 |
#size-cells = <1>; |
| 56 |
interrupt-parent = <&gic>; |
| 57 |
|
| 58 |
clocks { |
| 59 |
#address-cells = <1>; |
| 60 |
#size-cells = <1>; |
| 61 |
ranges; |
| 62 |
|
| 63 |
osc24M: osc24M { |
| 64 |
#clock-cells = <0>; |
| 65 |
compatible = "fixed-clock"; |
| 66 |
clock-frequency = <24000000>; |
| 67 |
clock-accuracy = <50000>; |
| 68 |
clock-output-names = "osc24M"; |
| 69 |
}; |
| 70 |
|
| 71 |
osc32k: osc32k { |
| 72 |
#clock-cells = <0>; |
| 73 |
compatible = "fixed-clock"; |
| 74 |
clock-frequency = <32768>; |
| 75 |
clock-accuracy = <20000>; |
| 76 |
clock-output-names = "ext-osc32k"; |
| 77 |
}; |
| 78 |
}; |
| 79 |
|
| 80 |
cpus { |
| 81 |
#address-cells = <1>; |
| 82 |
#size-cells = <0>; |
| 83 |
|
| 84 |
cpu0: cpu@0 { |
| 85 |
compatible = "arm,cortex-a7"; |
| 86 |
device_type = "cpu"; |
| 87 |
reg = <0>; |
| 88 |
clocks = <&ccu CLK_CPU>; |
| 89 |
clock-names = "cpu"; |
| 90 |
#cooling-cells = <2>; |
| 91 |
}; |
| 92 |
|
| 93 |
cpu1: cpu@1 { |
| 94 |
compatible = "arm,cortex-a7"; |
| 95 |
device_type = "cpu"; |
| 96 |
reg = <1>; |
| 97 |
clocks = <&ccu CLK_CPU>; |
| 98 |
clock-names = "cpu"; |
| 99 |
#cooling-cells = <2>; |
| 100 |
}; |
| 101 |
|
| 102 |
cpu2: cpu@2 { |
| 103 |
compatible = "arm,cortex-a7"; |
| 104 |
device_type = "cpu"; |
| 105 |
reg = <2>; |
| 106 |
clocks = <&ccu CLK_CPU>; |
| 107 |
clock-names = "cpu"; |
| 108 |
#cooling-cells = <2>; |
| 109 |
}; |
| 110 |
|
| 111 |
cpu3: cpu@3 { |
| 112 |
compatible = "arm,cortex-a7"; |
| 113 |
device_type = "cpu"; |
| 114 |
reg = <3>; |
| 115 |
clocks = <&ccu CLK_CPU>; |
| 116 |
clock-names = "cpu"; |
| 117 |
#cooling-cells = <2>; |
| 118 |
}; |
| 119 |
}; |
| 120 |
|
| 121 |
de: display-engine { |
| 122 |
compatible = "allwinner,sun8i-r40-display-engine"; |
| 123 |
allwinner,pipelines = <&mixer0>, <&mixer1>; |
| 124 |
status = "disabled"; |
| 125 |
}; |
| 126 |
|
| 127 |
thermal-zones { |
| 128 |
cpu_thermal: cpu0-thermal { |
| 129 |
/* milliseconds */ |
| 130 |
polling-delay-passive = <0>; |
| 131 |
polling-delay = <0>; |
| 132 |
thermal-sensors = <&ths 0>; |
| 133 |
|
| 134 |
trips { |
| 135 |
cpu_hot_trip: cpu-hot { |
| 136 |
temperature = <80000>; |
| 137 |
hysteresis = <2000>; |
| 138 |
type = "passive"; |
| 139 |
}; |
| 140 |
|
| 141 |
cpu_very_hot_trip: cpu-very-hot { |
| 142 |
temperature = <115000>; |
| 143 |
hysteresis = <0>; |
| 144 |
type = "critical"; |
| 145 |
}; |
| 146 |
}; |
| 147 |
|
| 148 |
cooling-maps { |
| 149 |
map0 { |
| 150 |
trip = <&cpu_hot_trip>; |
| 151 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 152 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 153 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 154 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 155 |
}; |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
gpu_thermal: gpu-thermal { |
| 160 |
/* milliseconds */ |
| 161 |
polling-delay-passive = <0>; |
| 162 |
polling-delay = <0>; |
| 163 |
thermal-sensors = <&ths 1>; |
| 164 |
}; |
| 165 |
}; |
| 166 |
|
| 167 |
soc { |
| 168 |
compatible = "simple-bus"; |
| 169 |
#address-cells = <1>; |
| 170 |
#size-cells = <1>; |
| 171 |
ranges; |
| 172 |
|
| 173 |
display_clocks: clock@1000000 { |
| 174 |
compatible = "allwinner,sun8i-r40-de2-clk", |
| 175 |
"allwinner,sun8i-h3-de2-clk"; |
| 176 |
reg = <0x01000000 0x10000>; |
| 177 |
clocks = <&ccu CLK_BUS_DE>, |
| 178 |
<&ccu CLK_DE>; |
| 179 |
clock-names = "bus", |
| 180 |
"mod"; |
| 181 |
resets = <&ccu RST_BUS_DE>; |
| 182 |
#clock-cells = <1>; |
| 183 |
#reset-cells = <1>; |
| 184 |
}; |
| 185 |
|
| 186 |
mixer0: mixer@1100000 { |
| 187 |
compatible = "allwinner,sun8i-r40-de2-mixer-0"; |
| 188 |
reg = <0x01100000 0x100000>; |
| 189 |
clocks = <&display_clocks CLK_BUS_MIXER0>, |
| 190 |
<&display_clocks CLK_MIXER0>; |
| 191 |
clock-names = "bus", |
| 192 |
"mod"; |
| 193 |
resets = <&display_clocks RST_MIXER0>; |
| 194 |
|
| 195 |
ports { |
| 196 |
#address-cells = <1>; |
| 197 |
#size-cells = <0>; |
| 198 |
|
| 199 |
mixer0_out: port@1 { |
| 200 |
reg = <1>; |
| 201 |
mixer0_out_tcon_top: endpoint { |
| 202 |
remote-endpoint = <&tcon_top_mixer0_in_mixer0>; |
| 203 |
}; |
| 204 |
}; |
| 205 |
}; |
| 206 |
}; |
| 207 |
|
| 208 |
mixer1: mixer@1200000 { |
| 209 |
compatible = "allwinner,sun8i-r40-de2-mixer-1"; |
| 210 |
reg = <0x01200000 0x100000>; |
| 211 |
clocks = <&display_clocks CLK_BUS_MIXER1>, |
| 212 |
<&display_clocks CLK_MIXER1>; |
| 213 |
clock-names = "bus", |
| 214 |
"mod"; |
| 215 |
resets = <&display_clocks RST_WB>; |
| 216 |
|
| 217 |
ports { |
| 218 |
#address-cells = <1>; |
| 219 |
#size-cells = <0>; |
| 220 |
|
| 221 |
mixer1_out: port@1 { |
| 222 |
reg = <1>; |
| 223 |
mixer1_out_tcon_top: endpoint { |
| 224 |
remote-endpoint = <&tcon_top_mixer1_in_mixer1>; |
| 225 |
}; |
| 226 |
}; |
| 227 |
}; |
| 228 |
}; |
| 229 |
|
| 230 |
deinterlace: deinterlace@1400000 { |
| 231 |
compatible = "allwinner,sun8i-r40-deinterlace", |
| 232 |
"allwinner,sun8i-h3-deinterlace"; |
| 233 |
reg = <0x01400000 0x20000>; |
| 234 |
clocks = <&ccu CLK_BUS_DEINTERLACE>, |
| 235 |
<&ccu CLK_DEINTERLACE>, |
| 236 |
/* |
| 237 |
* NOTE: Contrary to what datasheet claims, |
| 238 |
* DRAM deinterlace gate doesn't exist and |
| 239 |
* it's shared with CSI1. |
| 240 |
*/ |
| 241 |
<&ccu CLK_DRAM_CSI1>; |
| 242 |
clock-names = "bus", "mod", "ram"; |
| 243 |
resets = <&ccu RST_BUS_DEINTERLACE>; |
| 244 |
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| 245 |
interconnects = <&mbus 9>; |
| 246 |
interconnect-names = "dma-mem"; |
| 247 |
}; |
| 248 |
|
| 249 |
syscon: system-control@1c00000 { |
| 250 |
compatible = "allwinner,sun8i-r40-system-control", |
| 251 |
"allwinner,sun4i-a10-system-control"; |
| 252 |
reg = <0x01c00000 0x30>; |
| 253 |
#address-cells = <1>; |
| 254 |
#size-cells = <1>; |
| 255 |
ranges; |
| 256 |
|
| 257 |
sram_c: sram@1d00000 { |
| 258 |
compatible = "mmio-sram"; |
| 259 |
reg = <0x01d00000 0xd0000>; |
| 260 |
#address-cells = <1>; |
| 261 |
#size-cells = <1>; |
| 262 |
ranges = <0 0x01d00000 0xd0000>; |
| 263 |
|
| 264 |
ve_sram: sram-section@0 { |
| 265 |
compatible = "allwinner,sun8i-r40-sram-c1", |
| 266 |
"allwinner,sun4i-a10-sram-c1"; |
| 267 |
reg = <0x000000 0x80000>; |
| 268 |
}; |
| 269 |
}; |
| 270 |
}; |
| 271 |
|
| 272 |
nmi_intc: interrupt-controller@1c00030 { |
| 273 |
compatible = "allwinner,sun7i-a20-sc-nmi"; |
| 274 |
interrupt-controller; |
| 275 |
#interrupt-cells = <2>; |
| 276 |
reg = <0x01c00030 0x0c>; |
| 277 |
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| 278 |
}; |
| 279 |
|
| 280 |
dma: dma-controller@1c02000 { |
| 281 |
compatible = "allwinner,sun8i-r40-dma", |
| 282 |
"allwinner,sun50i-a64-dma"; |
| 283 |
reg = <0x01c02000 0x1000>; |
| 284 |
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 285 |
clocks = <&ccu CLK_BUS_DMA>; |
| 286 |
dma-channels = <16>; |
| 287 |
dma-requests = <31>; |
| 288 |
resets = <&ccu RST_BUS_DMA>; |
| 289 |
#dma-cells = <1>; |
| 290 |
}; |
| 291 |
|
| 292 |
spi0: spi@1c05000 { |
| 293 |
compatible = "allwinner,sun8i-r40-spi", |
| 294 |
"allwinner,sun8i-h3-spi"; |
| 295 |
reg = <0x01c05000 0x1000>; |
| 296 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 297 |
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; |
| 298 |
clock-names = "ahb", "mod"; |
| 299 |
resets = <&ccu RST_BUS_SPI0>; |
| 300 |
status = "disabled"; |
| 301 |
#address-cells = <1>; |
| 302 |
#size-cells = <0>; |
| 303 |
}; |
| 304 |
|
| 305 |
spi1: spi@1c06000 { |
| 306 |
compatible = "allwinner,sun8i-r40-spi", |
| 307 |
"allwinner,sun8i-h3-spi"; |
| 308 |
reg = <0x01c06000 0x1000>; |
| 309 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 310 |
clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; |
| 311 |
clock-names = "ahb", "mod"; |
| 312 |
resets = <&ccu RST_BUS_SPI1>; |
| 313 |
status = "disabled"; |
| 314 |
#address-cells = <1>; |
| 315 |
#size-cells = <0>; |
| 316 |
}; |
| 317 |
|
| 318 |
csi0: csi@1c09000 { |
| 319 |
compatible = "allwinner,sun8i-r40-csi0", |
| 320 |
"allwinner,sun7i-a20-csi0"; |
| 321 |
reg = <0x01c09000 0x1000>; |
| 322 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 323 |
clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>, |
| 324 |
<&ccu CLK_DRAM_CSI0>; |
| 325 |
clock-names = "bus", "isp", "ram"; |
| 326 |
resets = <&ccu RST_BUS_CSI0>; |
| 327 |
interconnects = <&mbus 5>; |
| 328 |
interconnect-names = "dma-mem"; |
| 329 |
status = "disabled"; |
| 330 |
}; |
| 331 |
|
| 332 |
video-codec@1c0e000 { |
| 333 |
compatible = "allwinner,sun8i-r40-video-engine"; |
| 334 |
reg = <0x01c0e000 0x1000>; |
| 335 |
clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, |
| 336 |
<&ccu CLK_DRAM_VE>; |
| 337 |
clock-names = "ahb", "mod", "ram"; |
| 338 |
resets = <&ccu RST_BUS_VE>; |
| 339 |
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| 340 |
allwinner,sram = <&ve_sram 1>; |
| 341 |
interconnects = <&mbus 4>; |
| 342 |
interconnect-names = "dma-mem"; |
| 343 |
}; |
| 344 |
|
| 345 |
mmc0: mmc@1c0f000 { |
| 346 |
compatible = "allwinner,sun8i-r40-mmc", |
| 347 |
"allwinner,sun50i-a64-mmc"; |
| 348 |
reg = <0x01c0f000 0x1000>; |
| 349 |
clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; |
| 350 |
clock-names = "ahb", "mmc"; |
| 351 |
resets = <&ccu RST_BUS_MMC0>; |
| 352 |
reset-names = "ahb"; |
| 353 |
pinctrl-0 = <&mmc0_pins>; |
| 354 |
pinctrl-names = "default"; |
| 355 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 356 |
status = "disabled"; |
| 357 |
#address-cells = <1>; |
| 358 |
#size-cells = <0>; |
| 359 |
}; |
| 360 |
|
| 361 |
mmc1: mmc@1c10000 { |
| 362 |
compatible = "allwinner,sun8i-r40-mmc", |
| 363 |
"allwinner,sun50i-a64-mmc"; |
| 364 |
reg = <0x01c10000 0x1000>; |
| 365 |
clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; |
| 366 |
clock-names = "ahb", "mmc"; |
| 367 |
resets = <&ccu RST_BUS_MMC1>; |
| 368 |
reset-names = "ahb"; |
| 369 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 370 |
status = "disabled"; |
| 371 |
#address-cells = <1>; |
| 372 |
#size-cells = <0>; |
| 373 |
}; |
| 374 |
|
| 375 |
mmc2: mmc@1c11000 { |
| 376 |
compatible = "allwinner,sun8i-r40-emmc", |
| 377 |
"allwinner,sun50i-a64-emmc"; |
| 378 |
reg = <0x01c11000 0x1000>; |
| 379 |
clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; |
| 380 |
clock-names = "ahb", "mmc"; |
| 381 |
resets = <&ccu RST_BUS_MMC2>; |
| 382 |
reset-names = "ahb"; |
| 383 |
pinctrl-0 = <&mmc2_pins>; |
| 384 |
pinctrl-names = "default"; |
| 385 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 386 |
status = "disabled"; |
| 387 |
#address-cells = <1>; |
| 388 |
#size-cells = <0>; |
| 389 |
}; |
| 390 |
|
| 391 |
mmc3: mmc@1c12000 { |
| 392 |
compatible = "allwinner,sun8i-r40-mmc", |
| 393 |
"allwinner,sun50i-a64-mmc"; |
| 394 |
reg = <0x01c12000 0x1000>; |
| 395 |
clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>; |
| 396 |
clock-names = "ahb", "mmc"; |
| 397 |
resets = <&ccu RST_BUS_MMC3>; |
| 398 |
reset-names = "ahb"; |
| 399 |
pinctrl-0 = <&mmc3_pins>; |
| 400 |
pinctrl-names = "default"; |
| 401 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 402 |
status = "disabled"; |
| 403 |
#address-cells = <1>; |
| 404 |
#size-cells = <0>; |
| 405 |
}; |
| 406 |
|
| 407 |
usbphy: phy@1c13400 { |
| 408 |
compatible = "allwinner,sun8i-r40-usb-phy"; |
| 409 |
reg = <0x01c13400 0x14>, |
| 410 |
<0x01c14800 0x4>, |
| 411 |
<0x01c19800 0x4>, |
| 412 |
<0x01c1c800 0x4>; |
| 413 |
reg-names = "phy_ctrl", |
| 414 |
"pmu0", |
| 415 |
"pmu1", |
| 416 |
"pmu2"; |
| 417 |
clocks = <&ccu CLK_USB_PHY0>, |
| 418 |
<&ccu CLK_USB_PHY1>, |
| 419 |
<&ccu CLK_USB_PHY2>; |
| 420 |
clock-names = "usb0_phy", |
| 421 |
"usb1_phy", |
| 422 |
"usb2_phy"; |
| 423 |
resets = <&ccu RST_USB_PHY0>, |
| 424 |
<&ccu RST_USB_PHY1>, |
| 425 |
<&ccu RST_USB_PHY2>; |
| 426 |
reset-names = "usb0_reset", |
| 427 |
"usb1_reset", |
| 428 |
"usb2_reset"; |
| 429 |
status = "disabled"; |
| 430 |
#phy-cells = <1>; |
| 431 |
}; |
| 432 |
|
| 433 |
crypto: crypto@1c15000 { |
| 434 |
compatible = "allwinner,sun8i-r40-crypto"; |
| 435 |
reg = <0x01c15000 0x1000>; |
| 436 |
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| 437 |
clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; |
| 438 |
clock-names = "bus", "mod"; |
| 439 |
resets = <&ccu RST_BUS_CE>; |
| 440 |
}; |
| 441 |
|
| 442 |
spi2: spi@1c17000 { |
| 443 |
compatible = "allwinner,sun8i-r40-spi", |
| 444 |
"allwinner,sun8i-h3-spi"; |
| 445 |
reg = <0x01c17000 0x1000>; |
| 446 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 447 |
clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>; |
| 448 |
clock-names = "ahb", "mod"; |
| 449 |
resets = <&ccu RST_BUS_SPI2>; |
| 450 |
status = "disabled"; |
| 451 |
#address-cells = <1>; |
| 452 |
#size-cells = <0>; |
| 453 |
}; |
| 454 |
|
| 455 |
ahci: sata@1c18000 { |
| 456 |
compatible = "allwinner,sun8i-r40-ahci"; |
| 457 |
reg = <0x01c18000 0x1000>; |
| 458 |
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| 459 |
clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; |
| 460 |
resets = <&ccu RST_BUS_SATA>; |
| 461 |
reset-names = "ahci"; |
| 462 |
status = "disabled"; |
| 463 |
}; |
| 464 |
|
| 465 |
ehci1: usb@1c19000 { |
| 466 |
compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; |
| 467 |
reg = <0x01c19000 0x100>; |
| 468 |
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| 469 |
clocks = <&ccu CLK_BUS_EHCI1>; |
| 470 |
resets = <&ccu RST_BUS_EHCI1>; |
| 471 |
phys = <&usbphy 1>; |
| 472 |
phy-names = "usb"; |
| 473 |
status = "disabled"; |
| 474 |
}; |
| 475 |
|
| 476 |
ohci1: usb@1c19400 { |
| 477 |
compatible = "allwinner,sun8i-r40-ohci", "generic-ohci"; |
| 478 |
reg = <0x01c19400 0x100>; |
| 479 |
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| 480 |
clocks = <&ccu CLK_BUS_OHCI1>, |
| 481 |
<&ccu CLK_USB_OHCI1>; |
| 482 |
resets = <&ccu RST_BUS_OHCI1>; |
| 483 |
phys = <&usbphy 1>; |
| 484 |
phy-names = "usb"; |
| 485 |
status = "disabled"; |
| 486 |
}; |
| 487 |
|
| 488 |
ehci2: usb@1c1c000 { |
| 489 |
compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; |
| 490 |
reg = <0x01c1c000 0x100>; |
| 491 |
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| 492 |
clocks = <&ccu CLK_BUS_EHCI2>; |
| 493 |
resets = <&ccu RST_BUS_EHCI2>; |
| 494 |
phys = <&usbphy 2>; |
| 495 |
phy-names = "usb"; |
| 496 |
status = "disabled"; |
| 497 |
}; |
| 498 |
|
| 499 |
ohci2: usb@1c1c400 { |
| 500 |
compatible = "allwinner,sun8i-r40-ohci", "generic-ohci"; |
| 501 |
reg = <0x01c1c400 0x100>; |
| 502 |
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 503 |
clocks = <&ccu CLK_BUS_OHCI2>, |
| 504 |
<&ccu CLK_USB_OHCI2>; |
| 505 |
resets = <&ccu RST_BUS_OHCI2>; |
| 506 |
phys = <&usbphy 2>; |
| 507 |
phy-names = "usb"; |
| 508 |
status = "disabled"; |
| 509 |
}; |
| 510 |
|
| 511 |
spi3: spi@1c1f000 { |
| 512 |
compatible = "allwinner,sun8i-r40-spi", |
| 513 |
"allwinner,sun8i-h3-spi"; |
| 514 |
reg = <0x01c1f000 0x1000>; |
| 515 |
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 516 |
clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>; |
| 517 |
clock-names = "ahb", "mod"; |
| 518 |
resets = <&ccu RST_BUS_SPI3>; |
| 519 |
status = "disabled"; |
| 520 |
#address-cells = <1>; |
| 521 |
#size-cells = <0>; |
| 522 |
}; |
| 523 |
|
| 524 |
ccu: clock@1c20000 { |
| 525 |
compatible = "allwinner,sun8i-r40-ccu"; |
| 526 |
reg = <0x01c20000 0x400>; |
| 527 |
clocks = <&osc24M>, <&rtc CLK_OSC32K>; |
| 528 |
clock-names = "hosc", "losc"; |
| 529 |
#clock-cells = <1>; |
| 530 |
#reset-cells = <1>; |
| 531 |
}; |
| 532 |
|
| 533 |
rtc: rtc@1c20400 { |
| 534 |
compatible = "allwinner,sun8i-r40-rtc"; |
| 535 |
reg = <0x01c20400 0x400>; |
| 536 |
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 537 |
clock-output-names = "osc32k", "osc32k-out"; |
| 538 |
clocks = <&osc32k>; |
| 539 |
#clock-cells = <1>; |
| 540 |
}; |
| 541 |
|
| 542 |
pio: pinctrl@1c20800 { |
| 543 |
compatible = "allwinner,sun8i-r40-pinctrl"; |
| 544 |
reg = <0x01c20800 0x400>; |
| 545 |
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 546 |
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, |
| 547 |
<&rtc CLK_OSC32K>; |
| 548 |
clock-names = "apb", "hosc", "losc"; |
| 549 |
gpio-controller; |
| 550 |
interrupt-controller; |
| 551 |
#interrupt-cells = <3>; |
| 552 |
#gpio-cells = <3>; |
| 553 |
|
| 554 |
can_ph_pins: can-ph-pins { |
| 555 |
pins = "PH20", "PH21"; |
| 556 |
function = "can"; |
| 557 |
}; |
| 558 |
|
| 559 |
can_pa_pins: can-pa-pins { |
| 560 |
pins = "PA16", "PA17"; |
| 561 |
function = "can"; |
| 562 |
}; |
| 563 |
|
| 564 |
clk_out_a_pin: clk-out-a-pin { |
| 565 |
pins = "PI12"; |
| 566 |
function = "clk_out_a"; |
| 567 |
}; |
| 568 |
|
| 569 |
/omit-if-no-ref/ |
| 570 |
csi0_8bits_pins: csi0-8bits-pins { |
| 571 |
pins = "PE0", "PE2", "PE3", "PE4", "PE5", |
| 572 |
"PE6", "PE7", "PE8", "PE9", "PE10", |
| 573 |
"PE11"; |
| 574 |
function = "csi0"; |
| 575 |
}; |
| 576 |
|
| 577 |
/omit-if-no-ref/ |
| 578 |
csi0_mclk_pin: csi0-mclk-pin { |
| 579 |
pins = "PE1"; |
| 580 |
function = "csi0"; |
| 581 |
}; |
| 582 |
|
| 583 |
gmac_rgmii_pins: gmac-rgmii-pins { |
| 584 |
pins = "PA0", "PA1", "PA2", "PA3", |
| 585 |
"PA4", "PA5", "PA6", "PA7", |
| 586 |
"PA8", "PA10", "PA11", "PA12", |
| 587 |
"PA13", "PA15", "PA16"; |
| 588 |
function = "gmac"; |
| 589 |
/* |
| 590 |
* data lines in RGMII mode use DDR mode |
| 591 |
* and need a higher signal drive strength |
| 592 |
*/ |
| 593 |
drive-strength = <40>; |
| 594 |
}; |
| 595 |
|
| 596 |
i2c0_pins: i2c0-pins { |
| 597 |
pins = "PB0", "PB1"; |
| 598 |
function = "i2c0"; |
| 599 |
}; |
| 600 |
|
| 601 |
i2c1_pins: i2c1-pins { |
| 602 |
pins = "PB18", "PB19"; |
| 603 |
function = "i2c1"; |
| 604 |
}; |
| 605 |
|
| 606 |
i2c2_pins: i2c2-pins { |
| 607 |
pins = "PB20", "PB21"; |
| 608 |
function = "i2c2"; |
| 609 |
}; |
| 610 |
|
| 611 |
i2c3_pins: i2c3-pins { |
| 612 |
pins = "PI0", "PI1"; |
| 613 |
function = "i2c3"; |
| 614 |
}; |
| 615 |
|
| 616 |
i2c4_pins: i2c4-pins { |
| 617 |
pins = "PI2", "PI3"; |
| 618 |
function = "i2c4"; |
| 619 |
}; |
| 620 |
|
| 621 |
ir0_pins: ir0-pins { |
| 622 |
pins = "PB4"; |
| 623 |
function = "ir0"; |
| 624 |
}; |
| 625 |
|
| 626 |
ir1_pins: ir1-pins { |
| 627 |
pins = "PB23"; |
| 628 |
function = "ir1"; |
| 629 |
}; |
| 630 |
|
| 631 |
mmc0_pins: mmc0-pins { |
| 632 |
pins = "PF0", "PF1", "PF2", |
| 633 |
"PF3", "PF4", "PF5"; |
| 634 |
function = "mmc0"; |
| 635 |
drive-strength = <30>; |
| 636 |
bias-pull-up; |
| 637 |
}; |
| 638 |
|
| 639 |
mmc1_pg_pins: mmc1-pg-pins { |
| 640 |
pins = "PG0", "PG1", "PG2", |
| 641 |
"PG3", "PG4", "PG5"; |
| 642 |
function = "mmc1"; |
| 643 |
drive-strength = <30>; |
| 644 |
bias-pull-up; |
| 645 |
}; |
| 646 |
|
| 647 |
mmc2_pins: mmc2-pins { |
| 648 |
pins = "PC5", "PC6", "PC7", "PC8", "PC9", |
| 649 |
"PC10", "PC11", "PC12", "PC13", "PC14", |
| 650 |
"PC15", "PC24"; |
| 651 |
function = "mmc2"; |
| 652 |
drive-strength = <30>; |
| 653 |
bias-pull-up; |
| 654 |
}; |
| 655 |
|
| 656 |
/omit-if-no-ref/ |
| 657 |
mmc3_pins: mmc3-pins { |
| 658 |
pins = "PI4", "PI5", "PI6", |
| 659 |
"PI7", "PI8", "PI9"; |
| 660 |
function = "mmc3"; |
| 661 |
drive-strength = <30>; |
| 662 |
bias-pull-up; |
| 663 |
}; |
| 664 |
|
| 665 |
/omit-if-no-ref/ |
| 666 |
spi0_pc_pins: spi0-pc-pins { |
| 667 |
pins = "PC0", "PC1", "PC2"; |
| 668 |
function = "spi0"; |
| 669 |
}; |
| 670 |
|
| 671 |
/omit-if-no-ref/ |
| 672 |
spi0_cs0_pc_pin: spi0-cs0-pc-pin { |
| 673 |
pins = "PC23"; |
| 674 |
function = "spi0"; |
| 675 |
}; |
| 676 |
|
| 677 |
/omit-if-no-ref/ |
| 678 |
spi1_pi_pins: spi1-pi-pins { |
| 679 |
pins = "PI17", "PI18", "PI19"; |
| 680 |
function = "spi1"; |
| 681 |
}; |
| 682 |
|
| 683 |
/omit-if-no-ref/ |
| 684 |
spi1_cs0_pi_pin: spi1-cs0-pi-pin { |
| 685 |
pins = "PI16"; |
| 686 |
function = "spi1"; |
| 687 |
}; |
| 688 |
|
| 689 |
/omit-if-no-ref/ |
| 690 |
spi1_cs1_pi_pin: spi1-cs1-pi-pin { |
| 691 |
pins = "PI15"; |
| 692 |
function = "spi1"; |
| 693 |
}; |
| 694 |
|
| 695 |
/omit-if-no-ref/ |
| 696 |
uart0_pb_pins: uart0-pb-pins { |
| 697 |
pins = "PB22", "PB23"; |
| 698 |
function = "uart0"; |
| 699 |
}; |
| 700 |
|
| 701 |
/omit-if-no-ref/ |
| 702 |
uart2_pi_pins: uart2-pi-pins { |
| 703 |
pins = "PI18", "PI19"; |
| 704 |
function = "uart2"; |
| 705 |
}; |
| 706 |
|
| 707 |
/omit-if-no-ref/ |
| 708 |
uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins { |
| 709 |
pins = "PI16", "PI17"; |
| 710 |
function = "uart2"; |
| 711 |
}; |
| 712 |
|
| 713 |
/omit-if-no-ref/ |
| 714 |
uart3_pg_pins: uart3-pg-pins { |
| 715 |
pins = "PG6", "PG7"; |
| 716 |
function = "uart3"; |
| 717 |
}; |
| 718 |
|
| 719 |
/omit-if-no-ref/ |
| 720 |
uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins { |
| 721 |
pins = "PG8", "PG9"; |
| 722 |
function = "uart3"; |
| 723 |
}; |
| 724 |
|
| 725 |
/omit-if-no-ref/ |
| 726 |
uart4_pg_pins: uart4-pg-pins { |
| 727 |
pins = "PG10", "PG11"; |
| 728 |
function = "uart4"; |
| 729 |
}; |
| 730 |
|
| 731 |
/omit-if-no-ref/ |
| 732 |
uart5_ph_pins: uart5-ph-pins { |
| 733 |
pins = "PH6", "PH7"; |
| 734 |
function = "uart5"; |
| 735 |
}; |
| 736 |
|
| 737 |
/omit-if-no-ref/ |
| 738 |
uart7_pi_pins: uart7-pi-pins { |
| 739 |
pins = "PI20", "PI21"; |
| 740 |
function = "uart7"; |
| 741 |
}; |
| 742 |
}; |
| 743 |
|
| 744 |
timer@1c20c00 { |
| 745 |
compatible = "allwinner,sun4i-a10-timer"; |
| 746 |
reg = <0x01c20c00 0x90>; |
| 747 |
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, |
| 748 |
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, |
| 749 |
<GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, |
| 750 |
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, |
| 751 |
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, |
| 752 |
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| 753 |
clocks = <&osc24M>; |
| 754 |
}; |
| 755 |
|
| 756 |
wdt: watchdog@1c20c90 { |
| 757 |
compatible = "allwinner,sun4i-a10-wdt"; |
| 758 |
reg = <0x01c20c90 0x10>; |
| 759 |
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 760 |
clocks = <&osc24M>; |
| 761 |
}; |
| 762 |
|
| 763 |
ir0: ir@1c21800 { |
| 764 |
compatible = "allwinner,sun8i-r40-ir", |
| 765 |
"allwinner,sun6i-a31-ir"; |
| 766 |
reg = <0x01c21800 0x400>; |
| 767 |
pinctrl-0 = <&ir0_pins>; |
| 768 |
pinctrl-names = "default"; |
| 769 |
clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>; |
| 770 |
clock-names = "apb", "ir"; |
| 771 |
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| 772 |
resets = <&ccu RST_BUS_IR0>; |
| 773 |
status = "disabled"; |
| 774 |
}; |
| 775 |
|
| 776 |
ir1: ir@1c21c00 { |
| 777 |
compatible = "allwinner,sun8i-r40-ir", |
| 778 |
"allwinner,sun6i-a31-ir"; |
| 779 |
reg = <0x01c21c00 0x400>; |
| 780 |
pinctrl-0 = <&ir1_pins>; |
| 781 |
pinctrl-names = "default"; |
| 782 |
clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>; |
| 783 |
clock-names = "apb", "ir"; |
| 784 |
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 785 |
resets = <&ccu RST_BUS_IR1>; |
| 786 |
status = "disabled"; |
| 787 |
}; |
| 788 |
|
| 789 |
i2s0: i2s@1c22000 { |
| 790 |
#sound-dai-cells = <0>; |
| 791 |
compatible = "allwinner,sun8i-r40-i2s", |
| 792 |
"allwinner,sun8i-h3-i2s"; |
| 793 |
reg = <0x01c22000 0x400>; |
| 794 |
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| 795 |
clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; |
| 796 |
clock-names = "apb", "mod"; |
| 797 |
resets = <&ccu RST_BUS_I2S0>; |
| 798 |
dmas = <&dma 3>, <&dma 3>; |
| 799 |
dma-names = "rx", "tx"; |
| 800 |
}; |
| 801 |
|
| 802 |
i2s1: i2s@1c22400 { |
| 803 |
#sound-dai-cells = <0>; |
| 804 |
compatible = "allwinner,sun8i-r40-i2s", |
| 805 |
"allwinner,sun8i-h3-i2s"; |
| 806 |
reg = <0x01c22400 0x400>; |
| 807 |
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| 808 |
clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; |
| 809 |
clock-names = "apb", "mod"; |
| 810 |
resets = <&ccu RST_BUS_I2S1>; |
| 811 |
dmas = <&dma 4>, <&dma 4>; |
| 812 |
dma-names = "rx", "tx"; |
| 813 |
}; |
| 814 |
|
| 815 |
i2s2: i2s@1c22800 { |
| 816 |
#sound-dai-cells = <0>; |
| 817 |
compatible = "allwinner,sun8i-r40-i2s", |
| 818 |
"allwinner,sun8i-h3-i2s"; |
| 819 |
reg = <0x01c22800 0x400>; |
| 820 |
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| 821 |
clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; |
| 822 |
clock-names = "apb", "mod"; |
| 823 |
resets = <&ccu RST_BUS_I2S2>; |
| 824 |
dmas = <&dma 6>, <&dma 6>; |
| 825 |
dma-names = "rx", "tx"; |
| 826 |
}; |
| 827 |
|
| 828 |
ths: thermal-sensor@1c24c00 { |
| 829 |
compatible = "allwinner,sun8i-r40-ths"; |
| 830 |
reg = <0x01c24c00 0x100>; |
| 831 |
clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; |
| 832 |
clock-names = "bus", "mod"; |
| 833 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 834 |
resets = <&ccu RST_BUS_THS>; |
| 835 |
/* TODO: add nvmem-cells for calibration */ |
| 836 |
#thermal-sensor-cells = <1>; |
| 837 |
}; |
| 838 |
|
| 839 |
uart0: serial@1c28000 { |
| 840 |
compatible = "snps,dw-apb-uart"; |
| 841 |
reg = <0x01c28000 0x400>; |
| 842 |
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 843 |
reg-shift = <2>; |
| 844 |
reg-io-width = <4>; |
| 845 |
clocks = <&ccu CLK_BUS_UART0>; |
| 846 |
resets = <&ccu RST_BUS_UART0>; |
| 847 |
status = "disabled"; |
| 848 |
}; |
| 849 |
|
| 850 |
uart1: serial@1c28400 { |
| 851 |
compatible = "snps,dw-apb-uart"; |
| 852 |
reg = <0x01c28400 0x400>; |
| 853 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 854 |
reg-shift = <2>; |
| 855 |
reg-io-width = <4>; |
| 856 |
clocks = <&ccu CLK_BUS_UART1>; |
| 857 |
resets = <&ccu RST_BUS_UART1>; |
| 858 |
status = "disabled"; |
| 859 |
}; |
| 860 |
|
| 861 |
uart2: serial@1c28800 { |
| 862 |
compatible = "snps,dw-apb-uart"; |
| 863 |
reg = <0x01c28800 0x400>; |
| 864 |
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 865 |
reg-shift = <2>; |
| 866 |
reg-io-width = <4>; |
| 867 |
clocks = <&ccu CLK_BUS_UART2>; |
| 868 |
resets = <&ccu RST_BUS_UART2>; |
| 869 |
status = "disabled"; |
| 870 |
}; |
| 871 |
|
| 872 |
uart3: serial@1c28c00 { |
| 873 |
compatible = "snps,dw-apb-uart"; |
| 874 |
reg = <0x01c28c00 0x400>; |
| 875 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 876 |
reg-shift = <2>; |
| 877 |
reg-io-width = <4>; |
| 878 |
clocks = <&ccu CLK_BUS_UART3>; |
| 879 |
resets = <&ccu RST_BUS_UART3>; |
| 880 |
status = "disabled"; |
| 881 |
}; |
| 882 |
|
| 883 |
uart4: serial@1c29000 { |
| 884 |
compatible = "snps,dw-apb-uart"; |
| 885 |
reg = <0x01c29000 0x400>; |
| 886 |
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| 887 |
reg-shift = <2>; |
| 888 |
reg-io-width = <4>; |
| 889 |
clocks = <&ccu CLK_BUS_UART4>; |
| 890 |
resets = <&ccu RST_BUS_UART4>; |
| 891 |
status = "disabled"; |
| 892 |
}; |
| 893 |
|
| 894 |
uart5: serial@1c29400 { |
| 895 |
compatible = "snps,dw-apb-uart"; |
| 896 |
reg = <0x01c29400 0x400>; |
| 897 |
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| 898 |
reg-shift = <2>; |
| 899 |
reg-io-width = <4>; |
| 900 |
clocks = <&ccu CLK_BUS_UART5>; |
| 901 |
resets = <&ccu RST_BUS_UART5>; |
| 902 |
status = "disabled"; |
| 903 |
}; |
| 904 |
|
| 905 |
uart6: serial@1c29800 { |
| 906 |
compatible = "snps,dw-apb-uart"; |
| 907 |
reg = <0x01c29800 0x400>; |
| 908 |
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| 909 |
reg-shift = <2>; |
| 910 |
reg-io-width = <4>; |
| 911 |
clocks = <&ccu CLK_BUS_UART6>; |
| 912 |
resets = <&ccu RST_BUS_UART6>; |
| 913 |
status = "disabled"; |
| 914 |
}; |
| 915 |
|
| 916 |
uart7: serial@1c29c00 { |
| 917 |
compatible = "snps,dw-apb-uart"; |
| 918 |
reg = <0x01c29c00 0x400>; |
| 919 |
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| 920 |
reg-shift = <2>; |
| 921 |
reg-io-width = <4>; |
| 922 |
clocks = <&ccu CLK_BUS_UART7>; |
| 923 |
resets = <&ccu RST_BUS_UART7>; |
| 924 |
status = "disabled"; |
| 925 |
}; |
| 926 |
|
| 927 |
i2c0: i2c@1c2ac00 { |
| 928 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 929 |
reg = <0x01c2ac00 0x400>; |
| 930 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 931 |
clocks = <&ccu CLK_BUS_I2C0>; |
| 932 |
resets = <&ccu RST_BUS_I2C0>; |
| 933 |
pinctrl-0 = <&i2c0_pins>; |
| 934 |
pinctrl-names = "default"; |
| 935 |
status = "disabled"; |
| 936 |
#address-cells = <1>; |
| 937 |
#size-cells = <0>; |
| 938 |
}; |
| 939 |
|
| 940 |
i2c1: i2c@1c2b000 { |
| 941 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 942 |
reg = <0x01c2b000 0x400>; |
| 943 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| 944 |
clocks = <&ccu CLK_BUS_I2C1>; |
| 945 |
resets = <&ccu RST_BUS_I2C1>; |
| 946 |
pinctrl-0 = <&i2c1_pins>; |
| 947 |
pinctrl-names = "default"; |
| 948 |
status = "disabled"; |
| 949 |
#address-cells = <1>; |
| 950 |
#size-cells = <0>; |
| 951 |
}; |
| 952 |
|
| 953 |
i2c2: i2c@1c2b400 { |
| 954 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 955 |
reg = <0x01c2b400 0x400>; |
| 956 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 957 |
clocks = <&ccu CLK_BUS_I2C2>; |
| 958 |
resets = <&ccu RST_BUS_I2C2>; |
| 959 |
pinctrl-0 = <&i2c2_pins>; |
| 960 |
pinctrl-names = "default"; |
| 961 |
status = "disabled"; |
| 962 |
#address-cells = <1>; |
| 963 |
#size-cells = <0>; |
| 964 |
}; |
| 965 |
|
| 966 |
i2c3: i2c@1c2b800 { |
| 967 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 968 |
reg = <0x01c2b800 0x400>; |
| 969 |
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| 970 |
clocks = <&ccu CLK_BUS_I2C3>; |
| 971 |
resets = <&ccu RST_BUS_I2C3>; |
| 972 |
pinctrl-0 = <&i2c3_pins>; |
| 973 |
pinctrl-names = "default"; |
| 974 |
status = "disabled"; |
| 975 |
#address-cells = <1>; |
| 976 |
#size-cells = <0>; |
| 977 |
}; |
| 978 |
|
| 979 |
can0: can@1c2bc00 { |
| 980 |
compatible = "allwinner,sun8i-r40-can"; |
| 981 |
reg = <0x01c2bc00 0x400>; |
| 982 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 983 |
clocks = <&ccu CLK_BUS_CAN>; |
| 984 |
resets = <&ccu RST_BUS_CAN>; |
| 985 |
status = "disabled"; |
| 986 |
}; |
| 987 |
|
| 988 |
i2c4: i2c@1c2c000 { |
| 989 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 990 |
reg = <0x01c2c000 0x400>; |
| 991 |
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| 992 |
clocks = <&ccu CLK_BUS_I2C4>; |
| 993 |
resets = <&ccu RST_BUS_I2C4>; |
| 994 |
pinctrl-0 = <&i2c4_pins>; |
| 995 |
pinctrl-names = "default"; |
| 996 |
status = "disabled"; |
| 997 |
#address-cells = <1>; |
| 998 |
#size-cells = <0>; |
| 999 |
}; |
| 1000 |
|
| 1001 |
mali: gpu@1c40000 { |
| 1002 |
compatible = "allwinner,sun8i-r40-mali", "arm,mali-400"; |
| 1003 |
reg = <0x01c40000 0x10000>; |
| 1004 |
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
| 1005 |
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| 1006 |
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, |
| 1007 |
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| 1008 |
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| 1009 |
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, |
| 1010 |
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 1011 |
interrupt-names = "gp", |
| 1012 |
"gpmmu", |
| 1013 |
"pp0", |
| 1014 |
"ppmmu0", |
| 1015 |
"pp1", |
| 1016 |
"ppmmu1", |
| 1017 |
"pmu"; |
| 1018 |
clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; |
| 1019 |
clock-names = "bus", "core"; |
| 1020 |
resets = <&ccu RST_BUS_GPU>; |
| 1021 |
}; |
| 1022 |
|
| 1023 |
gmac: ethernet@1c50000 { |
| 1024 |
compatible = "allwinner,sun8i-r40-gmac"; |
| 1025 |
syscon = <&ccu>; |
| 1026 |
reg = <0x01c50000 0x10000>; |
| 1027 |
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| 1028 |
interrupt-names = "macirq"; |
| 1029 |
resets = <&ccu RST_BUS_GMAC>; |
| 1030 |
reset-names = "stmmaceth"; |
| 1031 |
clocks = <&ccu CLK_BUS_GMAC>; |
| 1032 |
clock-names = "stmmaceth"; |
| 1033 |
status = "disabled"; |
| 1034 |
|
| 1035 |
gmac_mdio: mdio { |
| 1036 |
compatible = "snps,dwmac-mdio"; |
| 1037 |
#address-cells = <1>; |
| 1038 |
#size-cells = <0>; |
| 1039 |
}; |
| 1040 |
}; |
| 1041 |
|
| 1042 |
mbus: dram-controller@1c62000 { |
| 1043 |
compatible = "allwinner,sun8i-r40-mbus"; |
| 1044 |
reg = <0x01c62000 0x1000>; |
| 1045 |
clocks = <&ccu 155>; |
| 1046 |
#address-cells = <1>; |
| 1047 |
#size-cells = <1>; |
| 1048 |
dma-ranges = <0x00000000 0x40000000 0x80000000>; |
| 1049 |
#interconnect-cells = <1>; |
| 1050 |
}; |
| 1051 |
|
| 1052 |
tcon_top: tcon-top@1c70000 { |
| 1053 |
compatible = "allwinner,sun8i-r40-tcon-top"; |
| 1054 |
reg = <0x01c70000 0x1000>; |
| 1055 |
clocks = <&ccu CLK_BUS_TCON_TOP>, |
| 1056 |
<&ccu CLK_TCON_TV0>, |
| 1057 |
<&ccu CLK_TVE0>, |
| 1058 |
<&ccu CLK_TCON_TV1>, |
| 1059 |
<&ccu CLK_TVE1>, |
| 1060 |
<&ccu CLK_DSI_DPHY>; |
| 1061 |
clock-names = "bus", |
| 1062 |
"tcon-tv0", |
| 1063 |
"tve0", |
| 1064 |
"tcon-tv1", |
| 1065 |
"tve1", |
| 1066 |
"dsi"; |
| 1067 |
clock-output-names = "tcon-top-tv0", |
| 1068 |
"tcon-top-tv1", |
| 1069 |
"tcon-top-dsi"; |
| 1070 |
resets = <&ccu RST_BUS_TCON_TOP>; |
| 1071 |
#clock-cells = <1>; |
| 1072 |
|
| 1073 |
ports { |
| 1074 |
#address-cells = <1>; |
| 1075 |
#size-cells = <0>; |
| 1076 |
|
| 1077 |
tcon_top_mixer0_in: port@0 { |
| 1078 |
reg = <0>; |
| 1079 |
|
| 1080 |
tcon_top_mixer0_in_mixer0: endpoint { |
| 1081 |
remote-endpoint = <&mixer0_out_tcon_top>; |
| 1082 |
}; |
| 1083 |
}; |
| 1084 |
|
| 1085 |
tcon_top_mixer0_out: port@1 { |
| 1086 |
#address-cells = <1>; |
| 1087 |
#size-cells = <0>; |
| 1088 |
reg = <1>; |
| 1089 |
|
| 1090 |
tcon_top_mixer0_out_tcon_lcd0: endpoint@0 { |
| 1091 |
reg = <0>; |
| 1092 |
}; |
| 1093 |
|
| 1094 |
tcon_top_mixer0_out_tcon_lcd1: endpoint@1 { |
| 1095 |
reg = <1>; |
| 1096 |
}; |
| 1097 |
|
| 1098 |
tcon_top_mixer0_out_tcon_tv0: endpoint@2 { |
| 1099 |
reg = <2>; |
| 1100 |
remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>; |
| 1101 |
}; |
| 1102 |
|
| 1103 |
tcon_top_mixer0_out_tcon_tv1: endpoint@3 { |
| 1104 |
reg = <3>; |
| 1105 |
remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>; |
| 1106 |
}; |
| 1107 |
}; |
| 1108 |
|
| 1109 |
tcon_top_mixer1_in: port@2 { |
| 1110 |
#address-cells = <1>; |
| 1111 |
#size-cells = <0>; |
| 1112 |
reg = <2>; |
| 1113 |
|
| 1114 |
tcon_top_mixer1_in_mixer1: endpoint@1 { |
| 1115 |
reg = <1>; |
| 1116 |
remote-endpoint = <&mixer1_out_tcon_top>; |
| 1117 |
}; |
| 1118 |
}; |
| 1119 |
|
| 1120 |
tcon_top_mixer1_out: port@3 { |
| 1121 |
#address-cells = <1>; |
| 1122 |
#size-cells = <0>; |
| 1123 |
reg = <3>; |
| 1124 |
|
| 1125 |
tcon_top_mixer1_out_tcon_lcd0: endpoint@0 { |
| 1126 |
reg = <0>; |
| 1127 |
}; |
| 1128 |
|
| 1129 |
tcon_top_mixer1_out_tcon_lcd1: endpoint@1 { |
| 1130 |
reg = <1>; |
| 1131 |
}; |
| 1132 |
|
| 1133 |
tcon_top_mixer1_out_tcon_tv0: endpoint@2 { |
| 1134 |
reg = <2>; |
| 1135 |
remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>; |
| 1136 |
}; |
| 1137 |
|
| 1138 |
tcon_top_mixer1_out_tcon_tv1: endpoint@3 { |
| 1139 |
reg = <3>; |
| 1140 |
remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>; |
| 1141 |
}; |
| 1142 |
}; |
| 1143 |
|
| 1144 |
tcon_top_hdmi_in: port@4 { |
| 1145 |
#address-cells = <1>; |
| 1146 |
#size-cells = <0>; |
| 1147 |
reg = <4>; |
| 1148 |
|
| 1149 |
tcon_top_hdmi_in_tcon_tv0: endpoint@0 { |
| 1150 |
reg = <0>; |
| 1151 |
remote-endpoint = <&tcon_tv0_out_tcon_top>; |
| 1152 |
}; |
| 1153 |
|
| 1154 |
tcon_top_hdmi_in_tcon_tv1: endpoint@1 { |
| 1155 |
reg = <1>; |
| 1156 |
remote-endpoint = <&tcon_tv1_out_tcon_top>; |
| 1157 |
}; |
| 1158 |
}; |
| 1159 |
|
| 1160 |
tcon_top_hdmi_out: port@5 { |
| 1161 |
reg = <5>; |
| 1162 |
|
| 1163 |
tcon_top_hdmi_out_hdmi: endpoint { |
| 1164 |
remote-endpoint = <&hdmi_in_tcon_top>; |
| 1165 |
}; |
| 1166 |
}; |
| 1167 |
}; |
| 1168 |
}; |
| 1169 |
|
| 1170 |
tcon_tv0: lcd-controller@1c73000 { |
| 1171 |
compatible = "allwinner,sun8i-r40-tcon-tv"; |
| 1172 |
reg = <0x01c73000 0x1000>; |
| 1173 |
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| 1174 |
clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>; |
| 1175 |
clock-names = "ahb", "tcon-ch1"; |
| 1176 |
resets = <&ccu RST_BUS_TCON_TV0>; |
| 1177 |
reset-names = "lcd"; |
| 1178 |
status = "disabled"; |
| 1179 |
|
| 1180 |
ports { |
| 1181 |
#address-cells = <1>; |
| 1182 |
#size-cells = <0>; |
| 1183 |
|
| 1184 |
tcon_tv0_in: port@0 { |
| 1185 |
#address-cells = <1>; |
| 1186 |
#size-cells = <0>; |
| 1187 |
reg = <0>; |
| 1188 |
|
| 1189 |
tcon_tv0_in_tcon_top_mixer0: endpoint@0 { |
| 1190 |
reg = <0>; |
| 1191 |
remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>; |
| 1192 |
}; |
| 1193 |
|
| 1194 |
tcon_tv0_in_tcon_top_mixer1: endpoint@1 { |
| 1195 |
reg = <1>; |
| 1196 |
remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>; |
| 1197 |
}; |
| 1198 |
}; |
| 1199 |
|
| 1200 |
tcon_tv0_out: port@1 { |
| 1201 |
#address-cells = <1>; |
| 1202 |
#size-cells = <0>; |
| 1203 |
reg = <1>; |
| 1204 |
|
| 1205 |
tcon_tv0_out_tcon_top: endpoint@1 { |
| 1206 |
reg = <1>; |
| 1207 |
remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>; |
| 1208 |
}; |
| 1209 |
}; |
| 1210 |
}; |
| 1211 |
}; |
| 1212 |
|
| 1213 |
tcon_tv1: lcd-controller@1c74000 { |
| 1214 |
compatible = "allwinner,sun8i-r40-tcon-tv"; |
| 1215 |
reg = <0x01c74000 0x1000>; |
| 1216 |
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| 1217 |
clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>; |
| 1218 |
clock-names = "ahb", "tcon-ch1"; |
| 1219 |
resets = <&ccu RST_BUS_TCON_TV1>; |
| 1220 |
reset-names = "lcd"; |
| 1221 |
status = "disabled"; |
| 1222 |
|
| 1223 |
ports { |
| 1224 |
#address-cells = <1>; |
| 1225 |
#size-cells = <0>; |
| 1226 |
|
| 1227 |
tcon_tv1_in: port@0 { |
| 1228 |
#address-cells = <1>; |
| 1229 |
#size-cells = <0>; |
| 1230 |
reg = <0>; |
| 1231 |
|
| 1232 |
tcon_tv1_in_tcon_top_mixer0: endpoint@0 { |
| 1233 |
reg = <0>; |
| 1234 |
remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>; |
| 1235 |
}; |
| 1236 |
|
| 1237 |
tcon_tv1_in_tcon_top_mixer1: endpoint@1 { |
| 1238 |
reg = <1>; |
| 1239 |
remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>; |
| 1240 |
}; |
| 1241 |
}; |
| 1242 |
|
| 1243 |
tcon_tv1_out: port@1 { |
| 1244 |
#address-cells = <1>; |
| 1245 |
#size-cells = <0>; |
| 1246 |
reg = <1>; |
| 1247 |
|
| 1248 |
tcon_tv1_out_tcon_top: endpoint@1 { |
| 1249 |
reg = <1>; |
| 1250 |
remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>; |
| 1251 |
}; |
| 1252 |
}; |
| 1253 |
}; |
| 1254 |
}; |
| 1255 |
|
| 1256 |
gic: interrupt-controller@1c81000 { |
| 1257 |
compatible = "arm,gic-400"; |
| 1258 |
reg = <0x01c81000 0x1000>, |
| 1259 |
<0x01c82000 0x2000>, |
| 1260 |
<0x01c84000 0x2000>, |
| 1261 |
<0x01c86000 0x2000>; |
| 1262 |
interrupt-controller; |
| 1263 |
#interrupt-cells = <3>; |
| 1264 |
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 1265 |
}; |
| 1266 |
|
| 1267 |
hdmi: hdmi@1ee0000 { |
| 1268 |
compatible = "allwinner,sun8i-r40-dw-hdmi", |
| 1269 |
"allwinner,sun8i-a83t-dw-hdmi"; |
| 1270 |
reg = <0x01ee0000 0x10000>; |
| 1271 |
reg-io-width = <1>; |
| 1272 |
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| 1273 |
clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>, |
| 1274 |
<&ccu CLK_HDMI>, <&rtc CLK_OSC32K>; |
| 1275 |
clock-names = "iahb", "isfr", "tmds", "cec"; |
| 1276 |
resets = <&ccu RST_BUS_HDMI1>; |
| 1277 |
reset-names = "ctrl"; |
| 1278 |
phys = <&hdmi_phy>; |
| 1279 |
phy-names = "phy"; |
| 1280 |
status = "disabled"; |
| 1281 |
|
| 1282 |
ports { |
| 1283 |
#address-cells = <1>; |
| 1284 |
#size-cells = <0>; |
| 1285 |
|
| 1286 |
hdmi_in: port@0 { |
| 1287 |
reg = <0>; |
| 1288 |
|
| 1289 |
hdmi_in_tcon_top: endpoint { |
| 1290 |
remote-endpoint = <&tcon_top_hdmi_out_hdmi>; |
| 1291 |
}; |
| 1292 |
}; |
| 1293 |
|
| 1294 |
hdmi_out: port@1 { |
| 1295 |
reg = <1>; |
| 1296 |
}; |
| 1297 |
}; |
| 1298 |
}; |
| 1299 |
|
| 1300 |
hdmi_phy: hdmi-phy@1ef0000 { |
| 1301 |
compatible = "allwinner,sun8i-r40-hdmi-phy"; |
| 1302 |
reg = <0x01ef0000 0x10000>; |
| 1303 |
clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, |
| 1304 |
<&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>; |
| 1305 |
clock-names = "bus", "mod", "pll-0", "pll-1"; |
| 1306 |
resets = <&ccu RST_BUS_HDMI0>; |
| 1307 |
reset-names = "phy"; |
| 1308 |
#phy-cells = <0>; |
| 1309 |
}; |
| 1310 |
}; |
| 1311 |
|
| 1312 |
pmu { |
| 1313 |
compatible = "arm,cortex-a7-pmu"; |
| 1314 |
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| 1315 |
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, |
| 1316 |
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, |
| 1317 |
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; |
| 1318 |
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| 1319 |
}; |
| 1320 |
|
| 1321 |
timer { |
| 1322 |
compatible = "arm,armv7-timer"; |
| 1323 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 1324 |
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 1325 |
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 1326 |
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 1327 |
}; |
| 1328 |
}; |