| 1 |
/* |
| 2 |
* Copyright (C) 2017 Touchless Biometric Systems AG |
| 3 |
* Tomas Novotny <[email protected]> |
| 4 |
* |
| 5 |
* This file is dual-licensed: you can use it either under the terms |
| 6 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 7 |
* licensing only applies to this file, and not this project as a |
| 8 |
* whole. |
| 9 |
* |
| 10 |
* a) This file is free software; you can redistribute it and/or |
| 11 |
* modify it under the terms of the GNU General Public License as |
| 12 |
* published by the Free Software Foundation; either version 2 of the |
| 13 |
* License, or (at your option) any later version. |
| 14 |
* |
| 15 |
* This file is distributed in the hope that it will be useful, |
| 16 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 18 |
* GNU General Public License for more details. |
| 19 |
* |
| 20 |
* Or, alternatively, |
| 21 |
* |
| 22 |
* b) Permission is hereby granted, free of charge, to any person |
| 23 |
* obtaining a copy of this software and associated documentation |
| 24 |
* files (the "Software"), to deal in the Software without |
| 25 |
* restriction, including without limitation the rights to use, |
| 26 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 27 |
* sell copies of the Software, and to permit persons to whom the |
| 28 |
* Software is furnished to do so, subject to the following |
| 29 |
* conditions: |
| 30 |
* |
| 31 |
* The above copyright notice and this permission notice shall be |
| 32 |
* included in all copies or substantial portions of the Software. |
| 33 |
* |
| 34 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 35 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 36 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 37 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 38 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 39 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 40 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 41 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 42 |
*/ |
| 43 |
|
| 44 |
/dts-v1/; |
| 45 |
#include "sun8i-a83t.dtsi" |
| 46 |
|
| 47 |
#include <dt-bindings/gpio/gpio.h> |
| 48 |
#include <dt-bindings/pwm/pwm.h> |
| 49 |
#include <dt-bindings/input/input.h> |
| 50 |
|
| 51 |
/ { |
| 52 |
model = "TBS A711 Tablet"; |
| 53 |
compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t"; |
| 54 |
|
| 55 |
aliases { |
| 56 |
serial0 = &uart0; |
| 57 |
serial1 = &uart1; |
| 58 |
}; |
| 59 |
|
| 60 |
chosen { |
| 61 |
stdout-path = "serial0:115200n8"; |
| 62 |
}; |
| 63 |
|
| 64 |
backlight: backlight { |
| 65 |
compatible = "pwm-backlight"; |
| 66 |
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; |
| 67 |
enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>; |
| 68 |
power-supply = <®_sw>; |
| 69 |
brightness-levels = <0 1 2 4 8 16 32 64 128 255>; |
| 70 |
default-brightness-level = <9>; |
| 71 |
}; |
| 72 |
|
| 73 |
panel { |
| 74 |
compatible = "tbs,a711-panel", "panel-lvds"; |
| 75 |
backlight = <&backlight>; |
| 76 |
power-supply = <®_sw>; |
| 77 |
|
| 78 |
width-mm = <153>; |
| 79 |
height-mm = <90>; |
| 80 |
data-mapping = "vesa-24"; |
| 81 |
|
| 82 |
panel-timing { |
| 83 |
/* 1024x600 @60Hz */ |
| 84 |
clock-frequency = <52000000>; |
| 85 |
hactive = <1024>; |
| 86 |
vactive = <600>; |
| 87 |
hsync-len = <20>; |
| 88 |
hfront-porch = <180>; |
| 89 |
hback-porch = <160>; |
| 90 |
vfront-porch = <12>; |
| 91 |
vback-porch = <23>; |
| 92 |
vsync-len = <5>; |
| 93 |
}; |
| 94 |
|
| 95 |
port { |
| 96 |
panel_input: endpoint { |
| 97 |
remote-endpoint = <&tcon0_out_lcd>; |
| 98 |
}; |
| 99 |
}; |
| 100 |
}; |
| 101 |
|
| 102 |
reg_gps: reg-gps { |
| 103 |
compatible = "regulator-fixed"; |
| 104 |
regulator-name = "gps"; |
| 105 |
regulator-min-microvolt = <3000000>; |
| 106 |
regulator-max-microvolt = <3000000>; |
| 107 |
}; |
| 108 |
|
| 109 |
reg_vbat: reg-vbat { |
| 110 |
compatible = "regulator-fixed"; |
| 111 |
regulator-name = "vbat"; |
| 112 |
regulator-min-microvolt = <3700000>; |
| 113 |
regulator-max-microvolt = <3700000>; |
| 114 |
}; |
| 115 |
|
| 116 |
reg_vmain: reg-vmain { |
| 117 |
compatible = "regulator-fixed"; |
| 118 |
regulator-name = "vmain"; |
| 119 |
regulator-min-microvolt = <5000000>; |
| 120 |
regulator-max-microvolt = <5000000>; |
| 121 |
gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; |
| 122 |
enable-active-high; |
| 123 |
vin-supply = <®_vbat>; |
| 124 |
}; |
| 125 |
|
| 126 |
wifi_pwrseq: pwrseq { |
| 127 |
compatible = "mmc-pwrseq-simple"; |
| 128 |
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ |
| 129 |
|
| 130 |
/* |
| 131 |
* This is actually Bluetooth's clock, but we have to |
| 132 |
* hook it up somewheere |
| 133 |
*/ |
| 134 |
clocks = <&ac100_rtc 1>; |
| 135 |
clock-names = "ext_clock"; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
&cpu0 { |
| 140 |
cpu-supply = <®_dcdc2>; |
| 141 |
}; |
| 142 |
|
| 143 |
&cpu100 { |
| 144 |
cpu-supply = <®_dcdc3>; |
| 145 |
}; |
| 146 |
|
| 147 |
&de { |
| 148 |
status = "okay"; |
| 149 |
}; |
| 150 |
|
| 151 |
/* |
| 152 |
* An USB-2 hub is connected here, which also means we don't need to |
| 153 |
* enable the OHCI controller. |
| 154 |
*/ |
| 155 |
&ehci0 { |
| 156 |
status = "okay"; |
| 157 |
}; |
| 158 |
|
| 159 |
/* |
| 160 |
* There's a modem connected here that needs to be initialised before |
| 161 |
* being able to be enumerated. |
| 162 |
*/ |
| 163 |
&ehci1 { |
| 164 |
status = "okay"; |
| 165 |
}; |
| 166 |
|
| 167 |
&i2c0 { |
| 168 |
clock-frequency = <400000>; |
| 169 |
status = "okay"; |
| 170 |
|
| 171 |
touchscreen@38 { |
| 172 |
compatible = "edt,edt-ft5206"; |
| 173 |
reg = <0x38>; |
| 174 |
interrupt-parent = <&r_pio>; |
| 175 |
interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */ |
| 176 |
reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */ |
| 177 |
vcc-supply = <®_ldo_io0>; |
| 178 |
touchscreen-size-x = <1024>; |
| 179 |
touchscreen-size-y = <600>; |
| 180 |
}; |
| 181 |
}; |
| 182 |
|
| 183 |
&i2c1 { |
| 184 |
clock-frequency = <400000>; |
| 185 |
status = "okay"; |
| 186 |
|
| 187 |
accelerometer@18 { |
| 188 |
compatible = "bosch,bma250"; |
| 189 |
reg = <0x18>; |
| 190 |
interrupt-parent = <&pio>; |
| 191 |
interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */ |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
&mmc0 { |
| 196 |
vmmc-supply = <®_dcdc1>; |
| 197 |
pinctrl-names = "default"; |
| 198 |
pinctrl-0 = <&mmc0_pins>; |
| 199 |
bus-width = <4>; |
| 200 |
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; |
| 201 |
status = "okay"; |
| 202 |
}; |
| 203 |
|
| 204 |
&mmc1 { |
| 205 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 206 |
bus-width = <4>; |
| 207 |
vmmc-supply = <®_dldo1>; |
| 208 |
vqmmc-supply = <®_dldo1>; |
| 209 |
non-removable; |
| 210 |
wakeup-source; |
| 211 |
keep-power-in-suspend; |
| 212 |
status = "okay"; |
| 213 |
|
| 214 |
brcmf: wifi@1 { |
| 215 |
reg = <1>; |
| 216 |
compatible = "brcm,bcm4329-fmac"; |
| 217 |
interrupt-parent = <&r_pio>; |
| 218 |
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */ |
| 219 |
interrupt-names = "host-wake"; |
| 220 |
}; |
| 221 |
}; |
| 222 |
|
| 223 |
&mmc2 { |
| 224 |
pinctrl-0 = <&mmc2_8bit_emmc_pins>; |
| 225 |
pinctrl-names = "default"; |
| 226 |
vmmc-supply = <®_dcdc1>; |
| 227 |
vqmmc-supply = <®_dcdc1>; |
| 228 |
bus-width = <8>; |
| 229 |
non-removable; |
| 230 |
cap-mmc-hw-reset; |
| 231 |
status = "okay"; |
| 232 |
}; |
| 233 |
|
| 234 |
&pwm { |
| 235 |
pinctrl-names = "default"; |
| 236 |
pinctrl-0 = <&pwm_pin>; |
| 237 |
status = "okay"; |
| 238 |
}; |
| 239 |
|
| 240 |
&r_lradc { |
| 241 |
vref-supply = <®_aldo2>; |
| 242 |
status = "okay"; |
| 243 |
|
| 244 |
button-210 { |
| 245 |
label = "Volume Up"; |
| 246 |
linux,code = <KEY_VOLUMEUP>; |
| 247 |
channel = <0>; |
| 248 |
voltage = <210000>; |
| 249 |
}; |
| 250 |
|
| 251 |
button-410 { |
| 252 |
label = "Volume Down"; |
| 253 |
linux,code = <KEY_VOLUMEDOWN>; |
| 254 |
channel = <0>; |
| 255 |
voltage = <410000>; |
| 256 |
}; |
| 257 |
}; |
| 258 |
|
| 259 |
&r_rsb { |
| 260 |
status = "okay"; |
| 261 |
|
| 262 |
axp81x: pmic@3a3 { |
| 263 |
compatible = "x-powers,axp813"; |
| 264 |
reg = <0x3a3>; |
| 265 |
interrupt-parent = <&r_intc>; |
| 266 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; |
| 267 |
swin-supply = <®_dcdc1>; |
| 268 |
x-powers,drive-vbus-en; |
| 269 |
}; |
| 270 |
|
| 271 |
ac100: codec@e89 { |
| 272 |
compatible = "x-powers,ac100"; |
| 273 |
reg = <0xe89>; |
| 274 |
|
| 275 |
ac100_codec: codec { |
| 276 |
compatible = "x-powers,ac100-codec"; |
| 277 |
interrupt-parent = <&r_pio>; |
| 278 |
interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */ |
| 279 |
#clock-cells = <0>; |
| 280 |
clock-output-names = "4M_adda"; |
| 281 |
}; |
| 282 |
|
| 283 |
ac100_rtc: rtc { |
| 284 |
compatible = "x-powers,ac100-rtc"; |
| 285 |
interrupt-parent = <&r_intc>; |
| 286 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; |
| 287 |
clocks = <&ac100_codec>; |
| 288 |
#clock-cells = <1>; |
| 289 |
clock-output-names = "cko1_rtc", |
| 290 |
"cko2_rtc", |
| 291 |
"cko3_rtc"; |
| 292 |
}; |
| 293 |
}; |
| 294 |
|
| 295 |
}; |
| 296 |
|
| 297 |
#include "axp81x.dtsi" |
| 298 |
|
| 299 |
&battery_power_supply { |
| 300 |
status = "okay"; |
| 301 |
}; |
| 302 |
|
| 303 |
®_aldo1 { |
| 304 |
regulator-min-microvolt = <1800000>; |
| 305 |
regulator-max-microvolt = <1800000>; |
| 306 |
regulator-name = "vcc-1.8"; |
| 307 |
}; |
| 308 |
|
| 309 |
®_aldo2 { |
| 310 |
regulator-min-microvolt = <1800000>; |
| 311 |
regulator-max-microvolt = <1800000>; |
| 312 |
regulator-always-on; |
| 313 |
regulator-name = "vdd-drampll"; |
| 314 |
}; |
| 315 |
|
| 316 |
®_aldo3 { |
| 317 |
regulator-min-microvolt = <3000000>; |
| 318 |
regulator-max-microvolt = <3000000>; |
| 319 |
regulator-always-on; |
| 320 |
regulator-name = "avcc"; |
| 321 |
}; |
| 322 |
|
| 323 |
®_dcdc1 { |
| 324 |
regulator-min-microvolt = <3100000>; |
| 325 |
regulator-max-microvolt = <3100000>; |
| 326 |
regulator-always-on; |
| 327 |
regulator-name = "vcc-io"; |
| 328 |
}; |
| 329 |
|
| 330 |
®_dcdc2 { |
| 331 |
regulator-min-microvolt = <700000>; |
| 332 |
regulator-max-microvolt = <1100000>; |
| 333 |
regulator-always-on; |
| 334 |
regulator-name = "vdd-cpu-A"; |
| 335 |
}; |
| 336 |
|
| 337 |
®_dcdc3 { |
| 338 |
regulator-min-microvolt = <700000>; |
| 339 |
regulator-max-microvolt = <1100000>; |
| 340 |
regulator-always-on; |
| 341 |
regulator-name = "vdd-cpu-B"; |
| 342 |
}; |
| 343 |
|
| 344 |
®_dcdc4 { |
| 345 |
regulator-min-microvolt = <700000>; |
| 346 |
regulator-max-microvolt = <1100000>; |
| 347 |
regulator-name = "vdd-gpu"; |
| 348 |
}; |
| 349 |
|
| 350 |
®_dcdc5 { |
| 351 |
regulator-min-microvolt = <1200000>; |
| 352 |
regulator-max-microvolt = <1500000>; |
| 353 |
regulator-always-on; |
| 354 |
regulator-name = "vcc-dram"; |
| 355 |
}; |
| 356 |
|
| 357 |
®_dcdc6 { |
| 358 |
regulator-min-microvolt = <900000>; |
| 359 |
regulator-max-microvolt = <900000>; |
| 360 |
regulator-always-on; |
| 361 |
regulator-name = "vdd-sys"; |
| 362 |
}; |
| 363 |
|
| 364 |
®_dldo1 { |
| 365 |
regulator-min-microvolt = <3100000>; |
| 366 |
regulator-max-microvolt = <3100000>; |
| 367 |
regulator-name = "vcc-wifi-io"; |
| 368 |
}; |
| 369 |
|
| 370 |
®_dldo2 { |
| 371 |
regulator-min-microvolt = <2800000>; |
| 372 |
regulator-max-microvolt = <4200000>; |
| 373 |
regulator-name = "vcc-mipi"; |
| 374 |
}; |
| 375 |
|
| 376 |
®_dldo3 { |
| 377 |
regulator-min-microvolt = <1800000>; |
| 378 |
regulator-max-microvolt = <1800000>; |
| 379 |
regulator-name = "vdd-csi"; |
| 380 |
}; |
| 381 |
|
| 382 |
®_dldo4 { |
| 383 |
regulator-min-microvolt = <2800000>; |
| 384 |
regulator-max-microvolt = <2800000>; |
| 385 |
regulator-name = "avdd-csi"; |
| 386 |
}; |
| 387 |
|
| 388 |
®_drivevbus { |
| 389 |
regulator-name = "usb0-vbus"; |
| 390 |
status = "okay"; |
| 391 |
}; |
| 392 |
|
| 393 |
®_eldo1 { |
| 394 |
regulator-min-microvolt = <1200000>; |
| 395 |
regulator-max-microvolt = <1800000>; |
| 396 |
regulator-name = "dvdd-csi-r"; |
| 397 |
}; |
| 398 |
|
| 399 |
®_eldo2 { |
| 400 |
regulator-min-microvolt = <1800000>; |
| 401 |
regulator-max-microvolt = <1800000>; |
| 402 |
regulator-name = "vcc-dsi"; |
| 403 |
}; |
| 404 |
|
| 405 |
®_eldo3 { |
| 406 |
regulator-min-microvolt = <1200000>; |
| 407 |
regulator-max-microvolt = <1800000>; |
| 408 |
regulator-name = "dvdd-csi-f"; |
| 409 |
}; |
| 410 |
|
| 411 |
®_fldo1 { |
| 412 |
regulator-min-microvolt = <1200000>; |
| 413 |
regulator-max-microvolt = <1200000>; |
| 414 |
regulator-name = "vcc-hsic"; |
| 415 |
}; |
| 416 |
|
| 417 |
®_fldo2 { |
| 418 |
regulator-min-microvolt = <700000>; |
| 419 |
regulator-max-microvolt = <1100000>; |
| 420 |
regulator-always-on; |
| 421 |
regulator-name = "vdd-cpus"; |
| 422 |
}; |
| 423 |
|
| 424 |
®_ldo_io0 { |
| 425 |
regulator-min-microvolt = <3100000>; |
| 426 |
regulator-max-microvolt = <3100000>; |
| 427 |
regulator-name = "vcc-ctp"; |
| 428 |
status = "okay"; |
| 429 |
}; |
| 430 |
|
| 431 |
®_ldo_io1 { |
| 432 |
regulator-min-microvolt = <3100000>; |
| 433 |
regulator-max-microvolt = <3100000>; |
| 434 |
regulator-name = "vcc-vb"; |
| 435 |
status = "okay"; |
| 436 |
}; |
| 437 |
|
| 438 |
®_sw { |
| 439 |
regulator-min-microvolt = <3100000>; |
| 440 |
regulator-max-microvolt = <3100000>; |
| 441 |
regulator-name = "vcc-lcd"; |
| 442 |
}; |
| 443 |
|
| 444 |
&tcon0 { |
| 445 |
pinctrl-names = "default"; |
| 446 |
pinctrl-0 = <&lcd_lvds_pins>; |
| 447 |
}; |
| 448 |
|
| 449 |
&tcon0_out { |
| 450 |
tcon0_out_lcd: endpoint { |
| 451 |
remote-endpoint = <&panel_input>; |
| 452 |
}; |
| 453 |
}; |
| 454 |
|
| 455 |
&uart0 { |
| 456 |
pinctrl-names = "default"; |
| 457 |
pinctrl-0 = <&uart0_pb_pins>; |
| 458 |
status = "okay"; |
| 459 |
}; |
| 460 |
|
| 461 |
/* There's the BT part of the AP6210 connected to that UART */ |
| 462 |
&uart1 { |
| 463 |
pinctrl-names = "default"; |
| 464 |
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; |
| 465 |
uart-has-rtscts; |
| 466 |
status = "okay"; |
| 467 |
|
| 468 |
bluetooth { |
| 469 |
compatible = "brcm,bcm20702a1"; |
| 470 |
clocks = <&ac100_rtc 1>; |
| 471 |
clock-names = "lpo"; |
| 472 |
vbat-supply = <®_vbat>; |
| 473 |
vddio-supply = <®_dldo1>; |
| 474 |
device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ |
| 475 |
host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ |
| 476 |
shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ |
| 477 |
max-speed = <1500000>; |
| 478 |
}; |
| 479 |
}; |
| 480 |
|
| 481 |
&uart2 { |
| 482 |
pinctrl-names = "default"; |
| 483 |
pinctrl-0 = <&uart2_pb_pins>; |
| 484 |
status = "okay"; |
| 485 |
|
| 486 |
gnss { |
| 487 |
compatible = "u-blox,neo-6m"; |
| 488 |
|
| 489 |
v-bckp-supply = <®_rtc_ldo>; |
| 490 |
vcc-supply = <®_gps>; |
| 491 |
current-speed = <9600>; |
| 492 |
}; |
| 493 |
}; |
| 494 |
|
| 495 |
&usb_otg { |
| 496 |
status = "okay"; |
| 497 |
}; |
| 498 |
|
| 499 |
&usbphy { |
| 500 |
usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */ |
| 501 |
usb0_vbus_power-supply = <&usb_power_supply>; |
| 502 |
usb0_vbus-supply = <®_drivevbus>; |
| 503 |
usb1_vbus-supply = <®_vmain>; |
| 504 |
usb2_vbus-supply = <®_vmain>; |
| 505 |
status = "okay"; |
| 506 |
}; |