| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
#include <dt-bindings/input/linux-event-codes.h> |
| 5 |
#include "sun8i-v3s.dtsi" |
| 6 |
#include "sunxi-common-regulators.dtsi" |
| 7 |
|
| 8 |
/ { |
| 9 |
model = "Anbernic RG Nano"; |
| 10 |
compatible = "anbernic,rg-nano", "allwinner,sun8i-v3s"; |
| 11 |
|
| 12 |
aliases { |
| 13 |
rtc0 = &pcf8563; |
| 14 |
rtc1 = &rtc; |
| 15 |
serial0 = &uart0; |
| 16 |
}; |
| 17 |
|
| 18 |
backlight: backlight { |
| 19 |
compatible = "pwm-backlight"; |
| 20 |
brightness-levels = <0 1 2 3 8 14 21 32 46 60 80 100>; |
| 21 |
default-brightness-level = <11>; |
| 22 |
power-supply = <®_vcc5v0>; |
| 23 |
pwms = <&pwm 0 40000 1>; |
| 24 |
}; |
| 25 |
|
| 26 |
chosen { |
| 27 |
stdout-path = "serial0:115200n8"; |
| 28 |
}; |
| 29 |
|
| 30 |
gpio_keys: gpio-keys { |
| 31 |
compatible = "gpio-keys"; |
| 32 |
|
| 33 |
button-a { |
| 34 |
gpios = <&gpio_expander 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 35 |
label = "BTN-A"; |
| 36 |
linux,code = <BTN_EAST>; |
| 37 |
}; |
| 38 |
|
| 39 |
button-b { |
| 40 |
gpios = <&gpio_expander 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 41 |
label = "BTN-B"; |
| 42 |
linux,code = <BTN_SOUTH>; |
| 43 |
}; |
| 44 |
|
| 45 |
button-down { |
| 46 |
gpios = <&gpio_expander 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 47 |
label = "DPAD-DOWN"; |
| 48 |
linux,code = <BTN_DPAD_DOWN>; |
| 49 |
}; |
| 50 |
|
| 51 |
button-left { |
| 52 |
gpios = <&gpio_expander 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 53 |
label = "DPAD-LEFT"; |
| 54 |
linux,code = <BTN_DPAD_LEFT>; |
| 55 |
}; |
| 56 |
|
| 57 |
button-right { |
| 58 |
gpios = <&gpio_expander 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 59 |
label = "DPAD-RIGHT"; |
| 60 |
linux,code = <BTN_DPAD_RIGHT>; |
| 61 |
}; |
| 62 |
|
| 63 |
button-se { |
| 64 |
gpios = <&gpio_expander 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 65 |
label = "BTN-SELECT"; |
| 66 |
linux,code = <BTN_SELECT>; |
| 67 |
}; |
| 68 |
|
| 69 |
button-st { |
| 70 |
gpios = <&gpio_expander 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 71 |
label = "BTN-START"; |
| 72 |
linux,code = <BTN_START>; |
| 73 |
}; |
| 74 |
|
| 75 |
button-tl { |
| 76 |
gpios = <&gpio_expander 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 77 |
label = "BTN-L"; |
| 78 |
linux,code = <BTN_TL>; |
| 79 |
}; |
| 80 |
|
| 81 |
button-tr { |
| 82 |
gpios = <&gpio_expander 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 83 |
label = "BTN-R"; |
| 84 |
linux,code = <BTN_TR>; |
| 85 |
}; |
| 86 |
|
| 87 |
button-up { |
| 88 |
gpios = <&gpio_expander 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 89 |
label = "DPAD-UP"; |
| 90 |
linux,code = <BTN_DPAD_UP>; |
| 91 |
}; |
| 92 |
|
| 93 |
button-x { |
| 94 |
gpios = <&gpio_expander 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 95 |
label = "BTN-X"; |
| 96 |
linux,code = <BTN_NORTH>; |
| 97 |
}; |
| 98 |
|
| 99 |
button-y { |
| 100 |
gpios = <&gpio_expander 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 101 |
label = "BTN-Y"; |
| 102 |
linux,code = <BTN_WEST>; |
| 103 |
}; |
| 104 |
}; |
| 105 |
}; |
| 106 |
|
| 107 |
&codec { |
| 108 |
allwinner,audio-routing = "Speaker", "HP", |
| 109 |
"MIC1", "Mic", |
| 110 |
"Mic", "HBIAS"; |
| 111 |
allwinner,pa-gpios = <&pio 5 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PF6 */ |
| 112 |
status = "okay"; |
| 113 |
}; |
| 114 |
|
| 115 |
&ehci { |
| 116 |
status = "okay"; |
| 117 |
}; |
| 118 |
|
| 119 |
&i2c0 { |
| 120 |
status = "okay"; |
| 121 |
|
| 122 |
gpio_expander: gpio@20 { |
| 123 |
compatible = "nxp,pcal6416"; |
| 124 |
reg = <0x20>; |
| 125 |
gpio-controller; |
| 126 |
#gpio-cells = <2>; |
| 127 |
#interrupt-cells = <2>; |
| 128 |
interrupt-controller; |
| 129 |
interrupt-parent = <&pio>; |
| 130 |
interrupts = <1 3 IRQ_TYPE_EDGE_BOTH>; /* PB3/EINT3 */ |
| 131 |
vcc-supply = <®_vcc3v3>; |
| 132 |
}; |
| 133 |
|
| 134 |
axp209: pmic@34 { |
| 135 |
reg = <0x34>; |
| 136 |
interrupt-parent = <&pio>; |
| 137 |
interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5/EINT5 */ |
| 138 |
}; |
| 139 |
|
| 140 |
pcf8563: rtc@51 { |
| 141 |
compatible = "nxp,pcf8563"; |
| 142 |
reg = <0x51>; |
| 143 |
}; |
| 144 |
}; |
| 145 |
|
| 146 |
#include "axp209.dtsi" |
| 147 |
|
| 148 |
&battery_power_supply { |
| 149 |
status = "okay"; |
| 150 |
}; |
| 151 |
|
| 152 |
&mmc0 { |
| 153 |
broken-cd; |
| 154 |
bus-width = <4>; |
| 155 |
disable-wp; |
| 156 |
vmmc-supply = <®_vcc3v3>; |
| 157 |
vqmmc-supply = <®_vcc3v3>; |
| 158 |
status = "okay"; |
| 159 |
}; |
| 160 |
|
| 161 |
&ohci { |
| 162 |
status = "okay"; |
| 163 |
}; |
| 164 |
|
| 165 |
&pio { |
| 166 |
vcc-pb-supply = <®_vcc3v3>; |
| 167 |
vcc-pc-supply = <®_vcc3v3>; |
| 168 |
vcc-pf-supply = <®_vcc3v3>; |
| 169 |
vcc-pg-supply = <®_vcc3v3>; |
| 170 |
|
| 171 |
spi0_no_miso_pins: spi0-no-miso-pins { |
| 172 |
pins = "PC1", "PC2", "PC3"; |
| 173 |
function = "spi0"; |
| 174 |
}; |
| 175 |
}; |
| 176 |
|
| 177 |
&pwm { |
| 178 |
pinctrl-0 = <&pwm0_pin>; |
| 179 |
pinctrl-names = "default"; |
| 180 |
status = "okay"; |
| 181 |
}; |
| 182 |
|
| 183 |
/* DCDC2 wired into vdd-cpu, vdd-sys, and vdd-ephy. */ |
| 184 |
®_dcdc2 { |
| 185 |
regulator-always-on; |
| 186 |
regulator-max-microvolt = <1250000>; |
| 187 |
regulator-min-microvolt = <1250000>; |
| 188 |
regulator-name = "vdd-cpu"; |
| 189 |
}; |
| 190 |
|
| 191 |
/* DCDC3 wired into every 3.3v input that isn't the RTC. */ |
| 192 |
®_dcdc3 { |
| 193 |
regulator-always-on; |
| 194 |
regulator-max-microvolt = <3300000>; |
| 195 |
regulator-min-microvolt = <3300000>; |
| 196 |
regulator-name = "vcc-io"; |
| 197 |
}; |
| 198 |
|
| 199 |
/* LDO1 wired into RTC, voltage is hard-wired at 3.3v. */ |
| 200 |
®_ldo1 { |
| 201 |
regulator-always-on; |
| 202 |
regulator-name = "vcc-rtc"; |
| 203 |
}; |
| 204 |
|
| 205 |
/* LDO2 wired into VCC-PLL and audio codec. */ |
| 206 |
®_ldo2 { |
| 207 |
regulator-always-on; |
| 208 |
regulator-max-microvolt = <3000000>; |
| 209 |
regulator-min-microvolt = <3000000>; |
| 210 |
regulator-name = "vcc-pll"; |
| 211 |
}; |
| 212 |
|
| 213 |
/* LDO3, LDO4, and LDO5 unused. */ |
| 214 |
®_ldo3 { |
| 215 |
status = "disabled"; |
| 216 |
}; |
| 217 |
|
| 218 |
®_ldo4 { |
| 219 |
status = "disabled"; |
| 220 |
}; |
| 221 |
|
| 222 |
/* RTC uses internal oscillator */ |
| 223 |
&rtc { |
| 224 |
/delete-property/ clocks; |
| 225 |
}; |
| 226 |
|
| 227 |
&spi0 { |
| 228 |
pinctrl-0 = <&spi0_no_miso_pins>; |
| 229 |
pinctrl-names = "default"; |
| 230 |
status = "okay"; |
| 231 |
|
| 232 |
display@0 { |
| 233 |
compatible = "saef,sftc154b", "panel-mipi-dbi-spi"; |
| 234 |
reg = <0>; |
| 235 |
backlight = <&backlight>; |
| 236 |
dc-gpios = <&pio 2 0 GPIO_ACTIVE_HIGH>; /* PC0 */ |
| 237 |
reset-gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ |
| 238 |
spi-max-frequency = <100000000>; |
| 239 |
|
| 240 |
height-mm = <39>; |
| 241 |
width-mm = <39>; |
| 242 |
|
| 243 |
/* Set hb-porch to compensate for non-visible area */ |
| 244 |
panel-timing { |
| 245 |
hactive = <240>; |
| 246 |
vactive = <240>; |
| 247 |
hback-porch = <80>; |
| 248 |
vback-porch = <0>; |
| 249 |
clock-frequency = <0>; |
| 250 |
hfront-porch = <0>; |
| 251 |
hsync-len = <0>; |
| 252 |
vfront-porch = <0>; |
| 253 |
vsync-len = <0>; |
| 254 |
}; |
| 255 |
}; |
| 256 |
}; |
| 257 |
|
| 258 |
&uart0 { |
| 259 |
pinctrl-0 = <&uart0_pb_pins>; |
| 260 |
pinctrl-names = "default"; |
| 261 |
status = "okay"; |
| 262 |
}; |
| 263 |
|
| 264 |
&usb_otg { |
| 265 |
dr_mode = "otg"; |
| 266 |
status = "okay"; |
| 267 |
}; |
| 268 |
|
| 269 |
&usb_power_supply { |
| 270 |
status = "okay"; |
| 271 |
}; |
| 272 |
|
| 273 |
&usbphy { |
| 274 |
usb0_id_det-gpios = <&pio 6 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG5 */ |
| 275 |
status = "okay"; |
| 276 |
}; |