| 1 |
/* |
| 2 |
* Copyright 2015 Vishnu Patekar |
| 3 |
* |
| 4 |
* Vishnu Patekar <[email protected]> |
| 5 |
* |
| 6 |
* This file is dual-licensed: you can use it either under the terms |
| 7 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 8 |
* licensing only applies to this file, and not this project as a |
| 9 |
* whole. |
| 10 |
* |
| 11 |
* a) This file is free software; you can redistribute it and/or |
| 12 |
* modify it under the terms of the GNU General Public License as |
| 13 |
* published by the Free Software Foundation; either version 2 of the |
| 14 |
* License, or (at your option) any later version. |
| 15 |
* |
| 16 |
* This file is distributed in the hope that it will be useful, |
| 17 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 |
* GNU General Public License for more details. |
| 20 |
* |
| 21 |
* Or, alternatively, |
| 22 |
* |
| 23 |
* b) Permission is hereby granted, free of charge, to any person |
| 24 |
* obtaining a copy of this software and associated documentation |
| 25 |
* files (the "Software"), to deal in the Software without |
| 26 |
* restriction, including without limitation the rights to use, |
| 27 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 28 |
* sell copies of the Software, and to permit persons to whom the |
| 29 |
* Software is furnished to do so, subject to the following |
| 30 |
* conditions: |
| 31 |
* |
| 32 |
* The above copyright notice and this permission notice shall be |
| 33 |
* included in all copies or substantial portions of the Software. |
| 34 |
* |
| 35 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 36 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 37 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 38 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 39 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 40 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 41 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 42 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 43 |
*/ |
| 44 |
|
| 45 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 46 |
|
| 47 |
#include <dt-bindings/clock/sun8i-a83t-ccu.h> |
| 48 |
#include <dt-bindings/clock/sun8i-de2.h> |
| 49 |
#include <dt-bindings/clock/sun8i-r-ccu.h> |
| 50 |
#include <dt-bindings/reset/sun8i-a83t-ccu.h> |
| 51 |
#include <dt-bindings/reset/sun8i-de2.h> |
| 52 |
#include <dt-bindings/reset/sun8i-r-ccu.h> |
| 53 |
#include <dt-bindings/thermal/thermal.h> |
| 54 |
|
| 55 |
/ { |
| 56 |
interrupt-parent = <&gic>; |
| 57 |
#address-cells = <1>; |
| 58 |
#size-cells = <1>; |
| 59 |
|
| 60 |
cpus { |
| 61 |
#address-cells = <1>; |
| 62 |
#size-cells = <0>; |
| 63 |
|
| 64 |
cpu0: cpu@0 { |
| 65 |
compatible = "arm,cortex-a7"; |
| 66 |
device_type = "cpu"; |
| 67 |
clocks = <&ccu CLK_C0CPUX>; |
| 68 |
operating-points-v2 = <&cpu0_opp_table>; |
| 69 |
cci-control-port = <&cci_control0>; |
| 70 |
enable-method = "allwinner,sun8i-a83t-smp"; |
| 71 |
reg = <0>; |
| 72 |
#cooling-cells = <2>; |
| 73 |
}; |
| 74 |
|
| 75 |
cpu1: cpu@1 { |
| 76 |
compatible = "arm,cortex-a7"; |
| 77 |
device_type = "cpu"; |
| 78 |
clocks = <&ccu CLK_C0CPUX>; |
| 79 |
operating-points-v2 = <&cpu0_opp_table>; |
| 80 |
cci-control-port = <&cci_control0>; |
| 81 |
enable-method = "allwinner,sun8i-a83t-smp"; |
| 82 |
reg = <1>; |
| 83 |
#cooling-cells = <2>; |
| 84 |
}; |
| 85 |
|
| 86 |
cpu2: cpu@2 { |
| 87 |
compatible = "arm,cortex-a7"; |
| 88 |
device_type = "cpu"; |
| 89 |
clocks = <&ccu CLK_C0CPUX>; |
| 90 |
operating-points-v2 = <&cpu0_opp_table>; |
| 91 |
cci-control-port = <&cci_control0>; |
| 92 |
enable-method = "allwinner,sun8i-a83t-smp"; |
| 93 |
reg = <2>; |
| 94 |
#cooling-cells = <2>; |
| 95 |
}; |
| 96 |
|
| 97 |
cpu3: cpu@3 { |
| 98 |
compatible = "arm,cortex-a7"; |
| 99 |
device_type = "cpu"; |
| 100 |
clocks = <&ccu CLK_C0CPUX>; |
| 101 |
operating-points-v2 = <&cpu0_opp_table>; |
| 102 |
cci-control-port = <&cci_control0>; |
| 103 |
enable-method = "allwinner,sun8i-a83t-smp"; |
| 104 |
reg = <3>; |
| 105 |
#cooling-cells = <2>; |
| 106 |
}; |
| 107 |
|
| 108 |
cpu100: cpu@100 { |
| 109 |
compatible = "arm,cortex-a7"; |
| 110 |
device_type = "cpu"; |
| 111 |
clocks = <&ccu CLK_C1CPUX>; |
| 112 |
operating-points-v2 = <&cpu1_opp_table>; |
| 113 |
cci-control-port = <&cci_control1>; |
| 114 |
enable-method = "allwinner,sun8i-a83t-smp"; |
| 115 |
reg = <0x100>; |
| 116 |
#cooling-cells = <2>; |
| 117 |
}; |
| 118 |
|
| 119 |
cpu101: cpu@101 { |
| 120 |
compatible = "arm,cortex-a7"; |
| 121 |
device_type = "cpu"; |
| 122 |
clocks = <&ccu CLK_C1CPUX>; |
| 123 |
operating-points-v2 = <&cpu1_opp_table>; |
| 124 |
cci-control-port = <&cci_control1>; |
| 125 |
enable-method = "allwinner,sun8i-a83t-smp"; |
| 126 |
reg = <0x101>; |
| 127 |
#cooling-cells = <2>; |
| 128 |
}; |
| 129 |
|
| 130 |
cpu102: cpu@102 { |
| 131 |
compatible = "arm,cortex-a7"; |
| 132 |
device_type = "cpu"; |
| 133 |
clocks = <&ccu CLK_C1CPUX>; |
| 134 |
operating-points-v2 = <&cpu1_opp_table>; |
| 135 |
cci-control-port = <&cci_control1>; |
| 136 |
enable-method = "allwinner,sun8i-a83t-smp"; |
| 137 |
reg = <0x102>; |
| 138 |
#cooling-cells = <2>; |
| 139 |
}; |
| 140 |
|
| 141 |
cpu103: cpu@103 { |
| 142 |
compatible = "arm,cortex-a7"; |
| 143 |
device_type = "cpu"; |
| 144 |
clocks = <&ccu CLK_C1CPUX>; |
| 145 |
operating-points-v2 = <&cpu1_opp_table>; |
| 146 |
cci-control-port = <&cci_control1>; |
| 147 |
enable-method = "allwinner,sun8i-a83t-smp"; |
| 148 |
reg = <0x103>; |
| 149 |
#cooling-cells = <2>; |
| 150 |
}; |
| 151 |
}; |
| 152 |
|
| 153 |
timer { |
| 154 |
compatible = "arm,armv7-timer"; |
| 155 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 156 |
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 157 |
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| 158 |
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| 159 |
}; |
| 160 |
|
| 161 |
clocks { |
| 162 |
#address-cells = <1>; |
| 163 |
#size-cells = <1>; |
| 164 |
ranges; |
| 165 |
|
| 166 |
/* TODO: PRCM block has a mux for this. */ |
| 167 |
osc24M: osc24M-clk { |
| 168 |
#clock-cells = <0>; |
| 169 |
compatible = "fixed-clock"; |
| 170 |
clock-frequency = <24000000>; |
| 171 |
clock-accuracy = <50000>; |
| 172 |
clock-output-names = "osc24M"; |
| 173 |
}; |
| 174 |
|
| 175 |
/* |
| 176 |
* This is called "internal OSC" in some places. |
| 177 |
* It is an internal RC-based oscillator. |
| 178 |
* TODO: Its controls are in the PRCM block. |
| 179 |
*/ |
| 180 |
osc16M: osc16M-clk { |
| 181 |
#clock-cells = <0>; |
| 182 |
compatible = "fixed-clock"; |
| 183 |
clock-frequency = <16000000>; |
| 184 |
clock-output-names = "osc16M"; |
| 185 |
}; |
| 186 |
|
| 187 |
osc16Md512: osc16Md512-clk { |
| 188 |
#clock-cells = <0>; |
| 189 |
compatible = "fixed-factor-clock"; |
| 190 |
clock-div = <512>; |
| 191 |
clock-mult = <1>; |
| 192 |
clocks = <&osc16M>; |
| 193 |
clock-output-names = "osc16M-d512"; |
| 194 |
}; |
| 195 |
}; |
| 196 |
|
| 197 |
de: display-engine { |
| 198 |
compatible = "allwinner,sun8i-a83t-display-engine"; |
| 199 |
allwinner,pipelines = <&mixer0>, <&mixer1>; |
| 200 |
status = "disabled"; |
| 201 |
}; |
| 202 |
|
| 203 |
cpu0_opp_table: opp-table-cluster0 { |
| 204 |
compatible = "operating-points-v2"; |
| 205 |
opp-shared; |
| 206 |
|
| 207 |
opp-480000000 { |
| 208 |
opp-hz = /bits/ 64 <480000000>; |
| 209 |
opp-microvolt = <840000>; |
| 210 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 211 |
}; |
| 212 |
|
| 213 |
opp-600000000 { |
| 214 |
opp-hz = /bits/ 64 <600000000>; |
| 215 |
opp-microvolt = <840000>; |
| 216 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 217 |
}; |
| 218 |
|
| 219 |
opp-720000000 { |
| 220 |
opp-hz = /bits/ 64 <720000000>; |
| 221 |
opp-microvolt = <840000>; |
| 222 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 223 |
}; |
| 224 |
|
| 225 |
opp-864000000 { |
| 226 |
opp-hz = /bits/ 64 <864000000>; |
| 227 |
opp-microvolt = <840000>; |
| 228 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 229 |
}; |
| 230 |
|
| 231 |
opp-912000000 { |
| 232 |
opp-hz = /bits/ 64 <912000000>; |
| 233 |
opp-microvolt = <840000>; |
| 234 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 235 |
}; |
| 236 |
|
| 237 |
opp-1008000000 { |
| 238 |
opp-hz = /bits/ 64 <1008000000>; |
| 239 |
opp-microvolt = <840000>; |
| 240 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 241 |
}; |
| 242 |
|
| 243 |
opp-1128000000 { |
| 244 |
opp-hz = /bits/ 64 <1128000000>; |
| 245 |
opp-microvolt = <840000>; |
| 246 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 247 |
}; |
| 248 |
|
| 249 |
opp-1200000000 { |
| 250 |
opp-hz = /bits/ 64 <1200000000>; |
| 251 |
opp-microvolt = <840000>; |
| 252 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 253 |
}; |
| 254 |
}; |
| 255 |
|
| 256 |
cpu1_opp_table: opp-table-cluster1 { |
| 257 |
compatible = "operating-points-v2"; |
| 258 |
opp-shared; |
| 259 |
|
| 260 |
opp-480000000 { |
| 261 |
opp-hz = /bits/ 64 <480000000>; |
| 262 |
opp-microvolt = <840000>; |
| 263 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 264 |
}; |
| 265 |
|
| 266 |
opp-600000000 { |
| 267 |
opp-hz = /bits/ 64 <600000000>; |
| 268 |
opp-microvolt = <840000>; |
| 269 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 270 |
}; |
| 271 |
|
| 272 |
opp-720000000 { |
| 273 |
opp-hz = /bits/ 64 <720000000>; |
| 274 |
opp-microvolt = <840000>; |
| 275 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 276 |
}; |
| 277 |
|
| 278 |
opp-864000000 { |
| 279 |
opp-hz = /bits/ 64 <864000000>; |
| 280 |
opp-microvolt = <840000>; |
| 281 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 282 |
}; |
| 283 |
|
| 284 |
opp-912000000 { |
| 285 |
opp-hz = /bits/ 64 <912000000>; |
| 286 |
opp-microvolt = <840000>; |
| 287 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 288 |
}; |
| 289 |
|
| 290 |
opp-1008000000 { |
| 291 |
opp-hz = /bits/ 64 <1008000000>; |
| 292 |
opp-microvolt = <840000>; |
| 293 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 294 |
}; |
| 295 |
|
| 296 |
opp-1128000000 { |
| 297 |
opp-hz = /bits/ 64 <1128000000>; |
| 298 |
opp-microvolt = <840000>; |
| 299 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 300 |
}; |
| 301 |
|
| 302 |
opp-1200000000 { |
| 303 |
opp-hz = /bits/ 64 <1200000000>; |
| 304 |
opp-microvolt = <840000>; |
| 305 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 306 |
}; |
| 307 |
}; |
| 308 |
|
| 309 |
soc { |
| 310 |
compatible = "simple-bus"; |
| 311 |
#address-cells = <1>; |
| 312 |
#size-cells = <1>; |
| 313 |
ranges; |
| 314 |
|
| 315 |
display_clocks: clock@1000000 { |
| 316 |
compatible = "allwinner,sun8i-a83t-de2-clk"; |
| 317 |
reg = <0x01000000 0x10000>; |
| 318 |
clocks = <&ccu CLK_BUS_DE>, |
| 319 |
<&ccu CLK_PLL_DE>; |
| 320 |
clock-names = "bus", |
| 321 |
"mod"; |
| 322 |
resets = <&ccu RST_BUS_DE>; |
| 323 |
#clock-cells = <1>; |
| 324 |
#reset-cells = <1>; |
| 325 |
}; |
| 326 |
|
| 327 |
rotate: rotate@1020000 { |
| 328 |
compatible = "allwinner,sun8i-a83t-de2-rotate"; |
| 329 |
reg = <0x1020000 0x10000>; |
| 330 |
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; |
| 331 |
clocks = <&display_clocks CLK_BUS_ROT>, |
| 332 |
<&display_clocks CLK_ROT>; |
| 333 |
clock-names = "bus", |
| 334 |
"mod"; |
| 335 |
resets = <&display_clocks RST_ROT>; |
| 336 |
}; |
| 337 |
|
| 338 |
mixer0: mixer@1100000 { |
| 339 |
compatible = "allwinner,sun8i-a83t-de2-mixer-0"; |
| 340 |
reg = <0x01100000 0x100000>; |
| 341 |
clocks = <&display_clocks CLK_BUS_MIXER0>, |
| 342 |
<&display_clocks CLK_MIXER0>; |
| 343 |
clock-names = "bus", |
| 344 |
"mod"; |
| 345 |
resets = <&display_clocks RST_MIXER0>; |
| 346 |
|
| 347 |
ports { |
| 348 |
#address-cells = <1>; |
| 349 |
#size-cells = <0>; |
| 350 |
|
| 351 |
mixer0_out: port@1 { |
| 352 |
#address-cells = <1>; |
| 353 |
#size-cells = <0>; |
| 354 |
reg = <1>; |
| 355 |
|
| 356 |
mixer0_out_tcon0: endpoint@0 { |
| 357 |
reg = <0>; |
| 358 |
remote-endpoint = <&tcon0_in_mixer0>; |
| 359 |
}; |
| 360 |
|
| 361 |
mixer0_out_tcon1: endpoint@1 { |
| 362 |
reg = <1>; |
| 363 |
remote-endpoint = <&tcon1_in_mixer0>; |
| 364 |
}; |
| 365 |
}; |
| 366 |
}; |
| 367 |
}; |
| 368 |
|
| 369 |
mixer1: mixer@1200000 { |
| 370 |
compatible = "allwinner,sun8i-a83t-de2-mixer-1"; |
| 371 |
reg = <0x01200000 0x100000>; |
| 372 |
clocks = <&display_clocks CLK_BUS_MIXER1>, |
| 373 |
<&display_clocks CLK_MIXER1>; |
| 374 |
clock-names = "bus", |
| 375 |
"mod"; |
| 376 |
resets = <&display_clocks RST_WB>; |
| 377 |
|
| 378 |
ports { |
| 379 |
#address-cells = <1>; |
| 380 |
#size-cells = <0>; |
| 381 |
|
| 382 |
mixer1_out: port@1 { |
| 383 |
#address-cells = <1>; |
| 384 |
#size-cells = <0>; |
| 385 |
reg = <1>; |
| 386 |
|
| 387 |
mixer1_out_tcon0: endpoint@0 { |
| 388 |
reg = <0>; |
| 389 |
remote-endpoint = <&tcon0_in_mixer1>; |
| 390 |
}; |
| 391 |
|
| 392 |
mixer1_out_tcon1: endpoint@1 { |
| 393 |
reg = <1>; |
| 394 |
remote-endpoint = <&tcon1_in_mixer1>; |
| 395 |
}; |
| 396 |
}; |
| 397 |
}; |
| 398 |
}; |
| 399 |
|
| 400 |
cpucfg@1700000 { |
| 401 |
compatible = "allwinner,sun8i-a83t-cpucfg"; |
| 402 |
reg = <0x01700000 0x400>; |
| 403 |
}; |
| 404 |
|
| 405 |
cci@1790000 { |
| 406 |
compatible = "arm,cci-400"; |
| 407 |
#address-cells = <1>; |
| 408 |
#size-cells = <1>; |
| 409 |
reg = <0x01790000 0x10000>; |
| 410 |
ranges = <0x0 0x01790000 0x10000>; |
| 411 |
|
| 412 |
cci_control0: slave-if@4000 { |
| 413 |
compatible = "arm,cci-400-ctrl-if"; |
| 414 |
interface-type = "ace"; |
| 415 |
reg = <0x4000 0x1000>; |
| 416 |
}; |
| 417 |
|
| 418 |
cci_control1: slave-if@5000 { |
| 419 |
compatible = "arm,cci-400-ctrl-if"; |
| 420 |
interface-type = "ace"; |
| 421 |
reg = <0x5000 0x1000>; |
| 422 |
}; |
| 423 |
|
| 424 |
pmu@9000 { |
| 425 |
compatible = "arm,cci-400-pmu,r1"; |
| 426 |
reg = <0x9000 0x5000>; |
| 427 |
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| 428 |
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| 429 |
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| 430 |
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| 431 |
<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, |
| 432 |
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, |
| 433 |
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, |
| 434 |
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; |
| 435 |
}; |
| 436 |
}; |
| 437 |
|
| 438 |
syscon: syscon@1c00000 { |
| 439 |
compatible = "allwinner,sun8i-a83t-system-controller", |
| 440 |
"syscon"; |
| 441 |
reg = <0x01c00000 0x1000>; |
| 442 |
}; |
| 443 |
|
| 444 |
dma: dma-controller@1c02000 { |
| 445 |
compatible = "allwinner,sun8i-a83t-dma"; |
| 446 |
reg = <0x01c02000 0x1000>; |
| 447 |
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 448 |
clocks = <&ccu CLK_BUS_DMA>; |
| 449 |
resets = <&ccu RST_BUS_DMA>; |
| 450 |
#dma-cells = <1>; |
| 451 |
}; |
| 452 |
|
| 453 |
tcon0: lcd-controller@1c0c000 { |
| 454 |
compatible = "allwinner,sun8i-a83t-tcon-lcd"; |
| 455 |
reg = <0x01c0c000 0x1000>; |
| 456 |
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 457 |
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; |
| 458 |
clock-names = "ahb", "tcon-ch0"; |
| 459 |
clock-output-names = "tcon-data-clock"; |
| 460 |
#clock-cells = <0>; |
| 461 |
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; |
| 462 |
reset-names = "lcd", "lvds"; |
| 463 |
|
| 464 |
ports { |
| 465 |
#address-cells = <1>; |
| 466 |
#size-cells = <0>; |
| 467 |
|
| 468 |
tcon0_in: port@0 { |
| 469 |
#address-cells = <1>; |
| 470 |
#size-cells = <0>; |
| 471 |
reg = <0>; |
| 472 |
|
| 473 |
tcon0_in_mixer0: endpoint@0 { |
| 474 |
reg = <0>; |
| 475 |
remote-endpoint = <&mixer0_out_tcon0>; |
| 476 |
}; |
| 477 |
|
| 478 |
tcon0_in_mixer1: endpoint@1 { |
| 479 |
reg = <1>; |
| 480 |
remote-endpoint = <&mixer1_out_tcon0>; |
| 481 |
}; |
| 482 |
}; |
| 483 |
|
| 484 |
tcon0_out: port@1 { |
| 485 |
reg = <1>; |
| 486 |
}; |
| 487 |
}; |
| 488 |
}; |
| 489 |
|
| 490 |
tcon1: lcd-controller@1c0d000 { |
| 491 |
compatible = "allwinner,sun8i-a83t-tcon-tv"; |
| 492 |
reg = <0x01c0d000 0x1000>; |
| 493 |
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| 494 |
clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>; |
| 495 |
clock-names = "ahb", "tcon-ch1"; |
| 496 |
resets = <&ccu RST_BUS_TCON1>; |
| 497 |
reset-names = "lcd"; |
| 498 |
|
| 499 |
ports { |
| 500 |
#address-cells = <1>; |
| 501 |
#size-cells = <0>; |
| 502 |
|
| 503 |
tcon1_in: port@0 { |
| 504 |
#address-cells = <1>; |
| 505 |
#size-cells = <0>; |
| 506 |
reg = <0>; |
| 507 |
|
| 508 |
tcon1_in_mixer0: endpoint@0 { |
| 509 |
reg = <0>; |
| 510 |
remote-endpoint = <&mixer0_out_tcon1>; |
| 511 |
}; |
| 512 |
|
| 513 |
tcon1_in_mixer1: endpoint@1 { |
| 514 |
reg = <1>; |
| 515 |
remote-endpoint = <&mixer1_out_tcon1>; |
| 516 |
}; |
| 517 |
}; |
| 518 |
|
| 519 |
tcon1_out: port@1 { |
| 520 |
#address-cells = <1>; |
| 521 |
#size-cells = <0>; |
| 522 |
reg = <1>; |
| 523 |
|
| 524 |
tcon1_out_hdmi: endpoint@1 { |
| 525 |
reg = <1>; |
| 526 |
remote-endpoint = <&hdmi_in_tcon1>; |
| 527 |
}; |
| 528 |
}; |
| 529 |
}; |
| 530 |
}; |
| 531 |
|
| 532 |
mmc0: mmc@1c0f000 { |
| 533 |
compatible = "allwinner,sun8i-a83t-mmc", |
| 534 |
"allwinner,sun7i-a20-mmc"; |
| 535 |
reg = <0x01c0f000 0x1000>; |
| 536 |
clocks = <&ccu CLK_BUS_MMC0>, |
| 537 |
<&ccu CLK_MMC0>, |
| 538 |
<&ccu CLK_MMC0_OUTPUT>, |
| 539 |
<&ccu CLK_MMC0_SAMPLE>; |
| 540 |
clock-names = "ahb", |
| 541 |
"mmc", |
| 542 |
"output", |
| 543 |
"sample"; |
| 544 |
resets = <&ccu RST_BUS_MMC0>; |
| 545 |
reset-names = "ahb"; |
| 546 |
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| 547 |
status = "disabled"; |
| 548 |
#address-cells = <1>; |
| 549 |
#size-cells = <0>; |
| 550 |
}; |
| 551 |
|
| 552 |
mmc1: mmc@1c10000 { |
| 553 |
compatible = "allwinner,sun8i-a83t-mmc", |
| 554 |
"allwinner,sun7i-a20-mmc"; |
| 555 |
reg = <0x01c10000 0x1000>; |
| 556 |
clocks = <&ccu CLK_BUS_MMC1>, |
| 557 |
<&ccu CLK_MMC1>, |
| 558 |
<&ccu CLK_MMC1_OUTPUT>, |
| 559 |
<&ccu CLK_MMC1_SAMPLE>; |
| 560 |
clock-names = "ahb", |
| 561 |
"mmc", |
| 562 |
"output", |
| 563 |
"sample"; |
| 564 |
resets = <&ccu RST_BUS_MMC1>; |
| 565 |
reset-names = "ahb"; |
| 566 |
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| 567 |
pinctrl-names = "default"; |
| 568 |
pinctrl-0 = <&mmc1_pins>; |
| 569 |
status = "disabled"; |
| 570 |
#address-cells = <1>; |
| 571 |
#size-cells = <0>; |
| 572 |
}; |
| 573 |
|
| 574 |
mmc2: mmc@1c11000 { |
| 575 |
compatible = "allwinner,sun8i-a83t-emmc"; |
| 576 |
reg = <0x01c11000 0x1000>; |
| 577 |
clocks = <&ccu CLK_BUS_MMC2>, |
| 578 |
<&ccu CLK_MMC2>, |
| 579 |
<&ccu CLK_MMC2_OUTPUT>, |
| 580 |
<&ccu CLK_MMC2_SAMPLE>; |
| 581 |
clock-names = "ahb", |
| 582 |
"mmc", |
| 583 |
"output", |
| 584 |
"sample"; |
| 585 |
resets = <&ccu RST_BUS_MMC2>; |
| 586 |
reset-names = "ahb"; |
| 587 |
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| 588 |
status = "disabled"; |
| 589 |
#address-cells = <1>; |
| 590 |
#size-cells = <0>; |
| 591 |
}; |
| 592 |
|
| 593 |
sid: eeprom@1c14000 { |
| 594 |
compatible = "allwinner,sun8i-a83t-sid"; |
| 595 |
reg = <0x1c14000 0x400>; |
| 596 |
#address-cells = <1>; |
| 597 |
#size-cells = <1>; |
| 598 |
|
| 599 |
ths_calibration: thermal-sensor-calibration@34 { |
| 600 |
reg = <0x34 8>; |
| 601 |
}; |
| 602 |
}; |
| 603 |
|
| 604 |
crypto: crypto@1c15000 { |
| 605 |
compatible = "allwinner,sun8i-a83t-crypto"; |
| 606 |
reg = <0x01c15000 0x1000>; |
| 607 |
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| 608 |
resets = <&ccu RST_BUS_SS>; |
| 609 |
clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; |
| 610 |
clock-names = "bus", "mod"; |
| 611 |
}; |
| 612 |
|
| 613 |
msgbox: mailbox@1c17000 { |
| 614 |
compatible = "allwinner,sun8i-a83t-msgbox", |
| 615 |
"allwinner,sun6i-a31-msgbox"; |
| 616 |
reg = <0x01c17000 0x1000>; |
| 617 |
clocks = <&ccu CLK_BUS_MSGBOX>; |
| 618 |
resets = <&ccu RST_BUS_MSGBOX>; |
| 619 |
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| 620 |
#mbox-cells = <1>; |
| 621 |
}; |
| 622 |
|
| 623 |
usb_otg: usb@1c19000 { |
| 624 |
compatible = "allwinner,sun8i-a83t-musb", |
| 625 |
"allwinner,sun8i-a33-musb"; |
| 626 |
reg = <0x01c19000 0x0400>; |
| 627 |
clocks = <&ccu CLK_BUS_OTG>; |
| 628 |
resets = <&ccu RST_BUS_OTG>; |
| 629 |
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 630 |
interrupt-names = "mc"; |
| 631 |
phys = <&usbphy 0>; |
| 632 |
phy-names = "usb"; |
| 633 |
extcon = <&usbphy 0>; |
| 634 |
dr_mode = "otg"; |
| 635 |
status = "disabled"; |
| 636 |
}; |
| 637 |
|
| 638 |
usbphy: phy@1c19400 { |
| 639 |
compatible = "allwinner,sun8i-a83t-usb-phy"; |
| 640 |
reg = <0x01c19400 0x10>, |
| 641 |
<0x01c1a800 0x14>, |
| 642 |
<0x01c1b800 0x14>; |
| 643 |
reg-names = "phy_ctrl", |
| 644 |
"pmu1", |
| 645 |
"pmu2"; |
| 646 |
clocks = <&ccu CLK_USB_PHY0>, |
| 647 |
<&ccu CLK_USB_PHY1>, |
| 648 |
<&ccu CLK_USB_HSIC>, |
| 649 |
<&ccu CLK_USB_HSIC_12M>; |
| 650 |
clock-names = "usb0_phy", |
| 651 |
"usb1_phy", |
| 652 |
"usb2_phy", |
| 653 |
"usb2_hsic_12M"; |
| 654 |
resets = <&ccu RST_USB_PHY0>, |
| 655 |
<&ccu RST_USB_PHY1>, |
| 656 |
<&ccu RST_USB_HSIC>; |
| 657 |
reset-names = "usb0_reset", |
| 658 |
"usb1_reset", |
| 659 |
"usb2_reset"; |
| 660 |
status = "disabled"; |
| 661 |
#phy-cells = <1>; |
| 662 |
}; |
| 663 |
|
| 664 |
ehci0: usb@1c1a000 { |
| 665 |
compatible = "allwinner,sun8i-a83t-ehci", |
| 666 |
"generic-ehci"; |
| 667 |
reg = <0x01c1a000 0x100>; |
| 668 |
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| 669 |
clocks = <&ccu CLK_BUS_EHCI0>; |
| 670 |
resets = <&ccu RST_BUS_EHCI0>; |
| 671 |
phys = <&usbphy 1>; |
| 672 |
phy-names = "usb"; |
| 673 |
status = "disabled"; |
| 674 |
}; |
| 675 |
|
| 676 |
ohci0: usb@1c1a400 { |
| 677 |
compatible = "allwinner,sun8i-a83t-ohci", |
| 678 |
"generic-ohci"; |
| 679 |
reg = <0x01c1a400 0x100>; |
| 680 |
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 681 |
clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; |
| 682 |
resets = <&ccu RST_BUS_OHCI0>; |
| 683 |
phys = <&usbphy 1>; |
| 684 |
phy-names = "usb"; |
| 685 |
status = "disabled"; |
| 686 |
}; |
| 687 |
|
| 688 |
ehci1: usb@1c1b000 { |
| 689 |
compatible = "allwinner,sun8i-a83t-ehci", |
| 690 |
"generic-ehci"; |
| 691 |
reg = <0x01c1b000 0x100>; |
| 692 |
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| 693 |
clocks = <&ccu CLK_BUS_EHCI1>; |
| 694 |
resets = <&ccu RST_BUS_EHCI1>; |
| 695 |
phys = <&usbphy 2>; |
| 696 |
phy-names = "usb"; |
| 697 |
status = "disabled"; |
| 698 |
}; |
| 699 |
|
| 700 |
ccu: clock@1c20000 { |
| 701 |
compatible = "allwinner,sun8i-a83t-ccu"; |
| 702 |
reg = <0x01c20000 0x400>; |
| 703 |
clocks = <&osc24M>, <&osc16Md512>; |
| 704 |
clock-names = "hosc", "losc"; |
| 705 |
#clock-cells = <1>; |
| 706 |
#reset-cells = <1>; |
| 707 |
}; |
| 708 |
|
| 709 |
pio: pinctrl@1c20800 { |
| 710 |
compatible = "allwinner,sun8i-a83t-pinctrl"; |
| 711 |
interrupt-parent = <&r_intc>; |
| 712 |
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, |
| 713 |
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, |
| 714 |
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| 715 |
reg = <0x01c20800 0x400>; |
| 716 |
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>; |
| 717 |
clock-names = "apb", "hosc", "losc"; |
| 718 |
gpio-controller; |
| 719 |
interrupt-controller; |
| 720 |
#interrupt-cells = <3>; |
| 721 |
#gpio-cells = <3>; |
| 722 |
|
| 723 |
/omit-if-no-ref/ |
| 724 |
csi_8bit_parallel_pins: csi-8bit-parallel-pins { |
| 725 |
pins = "PE0", "PE2", "PE3", "PE6", "PE7", |
| 726 |
"PE8", "PE9", "PE10", "PE11", |
| 727 |
"PE12", "PE13"; |
| 728 |
function = "csi"; |
| 729 |
}; |
| 730 |
|
| 731 |
/omit-if-no-ref/ |
| 732 |
csi_mclk_pin: csi-mclk-pin { |
| 733 |
pins = "PE1"; |
| 734 |
function = "csi"; |
| 735 |
}; |
| 736 |
|
| 737 |
emac_rgmii_pins: emac-rgmii-pins { |
| 738 |
pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", |
| 739 |
"PD11", "PD12", "PD13", "PD14", "PD18", |
| 740 |
"PD19", "PD21", "PD22", "PD23"; |
| 741 |
function = "gmac"; |
| 742 |
/* |
| 743 |
* data lines in RGMII mode use DDR mode |
| 744 |
* and need a higher signal drive strength |
| 745 |
*/ |
| 746 |
drive-strength = <40>; |
| 747 |
}; |
| 748 |
|
| 749 |
hdmi_pins: hdmi-pins { |
| 750 |
pins = "PH6", "PH7", "PH8"; |
| 751 |
function = "hdmi"; |
| 752 |
}; |
| 753 |
|
| 754 |
i2c0_pins: i2c0-pins { |
| 755 |
pins = "PH0", "PH1"; |
| 756 |
function = "i2c0"; |
| 757 |
}; |
| 758 |
|
| 759 |
i2c1_pins: i2c1-pins { |
| 760 |
pins = "PH2", "PH3"; |
| 761 |
function = "i2c1"; |
| 762 |
}; |
| 763 |
|
| 764 |
/omit-if-no-ref/ |
| 765 |
i2c2_pe_pins: i2c2-pe-pins { |
| 766 |
pins = "PE14", "PE15"; |
| 767 |
function = "i2c2"; |
| 768 |
}; |
| 769 |
|
| 770 |
i2c2_ph_pins: i2c2-ph-pins { |
| 771 |
pins = "PH4", "PH5"; |
| 772 |
function = "i2c2"; |
| 773 |
}; |
| 774 |
|
| 775 |
i2s1_pins: i2s1-pins { |
| 776 |
/* I2S1 does not have external MCLK pin */ |
| 777 |
pins = "PG10", "PG11", "PG12", "PG13"; |
| 778 |
function = "i2s1"; |
| 779 |
}; |
| 780 |
|
| 781 |
lcd_lvds_pins: lcd-lvds-pins { |
| 782 |
pins = "PD18", "PD19", "PD20", "PD21", "PD22", |
| 783 |
"PD23", "PD24", "PD25", "PD26", "PD27"; |
| 784 |
function = "lvds0"; |
| 785 |
}; |
| 786 |
|
| 787 |
mmc0_pins: mmc0-pins { |
| 788 |
pins = "PF0", "PF1", "PF2", |
| 789 |
"PF3", "PF4", "PF5"; |
| 790 |
function = "mmc0"; |
| 791 |
drive-strength = <30>; |
| 792 |
bias-pull-up; |
| 793 |
}; |
| 794 |
|
| 795 |
mmc1_pins: mmc1-pins { |
| 796 |
pins = "PG0", "PG1", "PG2", |
| 797 |
"PG3", "PG4", "PG5"; |
| 798 |
function = "mmc1"; |
| 799 |
drive-strength = <30>; |
| 800 |
bias-pull-up; |
| 801 |
}; |
| 802 |
|
| 803 |
mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins { |
| 804 |
pins = "PC5", "PC6", "PC8", "PC9", |
| 805 |
"PC10", "PC11", "PC12", "PC13", |
| 806 |
"PC14", "PC15", "PC16"; |
| 807 |
function = "mmc2"; |
| 808 |
drive-strength = <30>; |
| 809 |
bias-pull-up; |
| 810 |
}; |
| 811 |
|
| 812 |
pwm_pin: pwm-pin { |
| 813 |
pins = "PD28"; |
| 814 |
function = "pwm"; |
| 815 |
}; |
| 816 |
|
| 817 |
spdif_tx_pin: spdif-tx-pin { |
| 818 |
pins = "PE18"; |
| 819 |
function = "spdif"; |
| 820 |
}; |
| 821 |
|
| 822 |
uart0_pb_pins: uart0-pb-pins { |
| 823 |
pins = "PB9", "PB10"; |
| 824 |
function = "uart0"; |
| 825 |
}; |
| 826 |
|
| 827 |
uart0_pf_pins: uart0-pf-pins { |
| 828 |
pins = "PF2", "PF4"; |
| 829 |
function = "uart0"; |
| 830 |
}; |
| 831 |
|
| 832 |
uart1_pins: uart1-pins { |
| 833 |
pins = "PG6", "PG7"; |
| 834 |
function = "uart1"; |
| 835 |
}; |
| 836 |
|
| 837 |
uart1_rts_cts_pins: uart1-rts-cts-pins { |
| 838 |
pins = "PG8", "PG9"; |
| 839 |
function = "uart1"; |
| 840 |
}; |
| 841 |
|
| 842 |
/omit-if-no-ref/ |
| 843 |
uart2_pb_pins: uart2-pb-pins { |
| 844 |
pins = "PB0", "PB1"; |
| 845 |
function = "uart2"; |
| 846 |
}; |
| 847 |
}; |
| 848 |
|
| 849 |
timer@1c20c00 { |
| 850 |
compatible = "allwinner,sun8i-a23-timer"; |
| 851 |
reg = <0x01c20c00 0xa0>; |
| 852 |
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| 853 |
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| 854 |
clocks = <&osc24M>; |
| 855 |
}; |
| 856 |
|
| 857 |
watchdog@1c20ca0 { |
| 858 |
compatible = "allwinner,sun6i-a31-wdt"; |
| 859 |
reg = <0x01c20ca0 0x20>; |
| 860 |
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 861 |
clocks = <&osc24M>; |
| 862 |
}; |
| 863 |
|
| 864 |
spdif: spdif@1c21000 { |
| 865 |
#sound-dai-cells = <0>; |
| 866 |
compatible = "allwinner,sun8i-a83t-spdif", |
| 867 |
"allwinner,sun8i-h3-spdif"; |
| 868 |
reg = <0x01c21000 0x400>; |
| 869 |
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 870 |
clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; |
| 871 |
resets = <&ccu RST_BUS_SPDIF>; |
| 872 |
clock-names = "apb", "spdif"; |
| 873 |
dmas = <&dma 2>; |
| 874 |
dma-names = "tx"; |
| 875 |
pinctrl-names = "default"; |
| 876 |
pinctrl-0 = <&spdif_tx_pin>; |
| 877 |
status = "disabled"; |
| 878 |
}; |
| 879 |
|
| 880 |
i2s0: i2s@1c22000 { |
| 881 |
#sound-dai-cells = <0>; |
| 882 |
compatible = "allwinner,sun8i-a83t-i2s"; |
| 883 |
reg = <0x01c22000 0x400>; |
| 884 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 885 |
clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; |
| 886 |
clock-names = "apb", "mod"; |
| 887 |
dmas = <&dma 3>, <&dma 3>; |
| 888 |
resets = <&ccu RST_BUS_I2S0>; |
| 889 |
dma-names = "rx", "tx"; |
| 890 |
status = "disabled"; |
| 891 |
}; |
| 892 |
|
| 893 |
i2s1: i2s@1c22400 { |
| 894 |
#sound-dai-cells = <0>; |
| 895 |
compatible = "allwinner,sun8i-a83t-i2s"; |
| 896 |
reg = <0x01c22400 0x400>; |
| 897 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 898 |
clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; |
| 899 |
clock-names = "apb", "mod"; |
| 900 |
dmas = <&dma 4>, <&dma 4>; |
| 901 |
resets = <&ccu RST_BUS_I2S1>; |
| 902 |
dma-names = "rx", "tx"; |
| 903 |
pinctrl-names = "default"; |
| 904 |
pinctrl-0 = <&i2s1_pins>; |
| 905 |
status = "disabled"; |
| 906 |
}; |
| 907 |
|
| 908 |
i2s2: i2s@1c22800 { |
| 909 |
#sound-dai-cells = <0>; |
| 910 |
compatible = "allwinner,sun8i-a83t-i2s"; |
| 911 |
reg = <0x01c22800 0x400>; |
| 912 |
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| 913 |
clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; |
| 914 |
clock-names = "apb", "mod"; |
| 915 |
dmas = <&dma 27>; |
| 916 |
resets = <&ccu RST_BUS_I2S2>; |
| 917 |
dma-names = "tx"; |
| 918 |
status = "disabled"; |
| 919 |
}; |
| 920 |
|
| 921 |
pwm: pwm@1c21400 { |
| 922 |
compatible = "allwinner,sun8i-a83t-pwm", |
| 923 |
"allwinner,sun8i-h3-pwm"; |
| 924 |
reg = <0x01c21400 0x400>; |
| 925 |
clocks = <&osc24M>; |
| 926 |
#pwm-cells = <3>; |
| 927 |
status = "disabled"; |
| 928 |
}; |
| 929 |
|
| 930 |
uart0: serial@1c28000 { |
| 931 |
compatible = "snps,dw-apb-uart"; |
| 932 |
reg = <0x01c28000 0x400>; |
| 933 |
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| 934 |
reg-shift = <2>; |
| 935 |
reg-io-width = <4>; |
| 936 |
clocks = <&ccu CLK_BUS_UART0>; |
| 937 |
resets = <&ccu RST_BUS_UART0>; |
| 938 |
status = "disabled"; |
| 939 |
}; |
| 940 |
|
| 941 |
uart1: serial@1c28400 { |
| 942 |
compatible = "snps,dw-apb-uart"; |
| 943 |
reg = <0x01c28400 0x400>; |
| 944 |
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 945 |
reg-shift = <2>; |
| 946 |
reg-io-width = <4>; |
| 947 |
clocks = <&ccu CLK_BUS_UART1>; |
| 948 |
resets = <&ccu RST_BUS_UART1>; |
| 949 |
status = "disabled"; |
| 950 |
}; |
| 951 |
|
| 952 |
uart2: serial@1c28800 { |
| 953 |
compatible = "snps,dw-apb-uart"; |
| 954 |
reg = <0x01c28800 0x400>; |
| 955 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 956 |
reg-shift = <2>; |
| 957 |
reg-io-width = <4>; |
| 958 |
clocks = <&ccu CLK_BUS_UART2>; |
| 959 |
resets = <&ccu RST_BUS_UART2>; |
| 960 |
status = "disabled"; |
| 961 |
}; |
| 962 |
|
| 963 |
uart3: serial@1c28c00 { |
| 964 |
compatible = "snps,dw-apb-uart"; |
| 965 |
reg = <0x01c28c00 0x400>; |
| 966 |
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 967 |
reg-shift = <2>; |
| 968 |
reg-io-width = <4>; |
| 969 |
clocks = <&ccu CLK_BUS_UART3>; |
| 970 |
resets = <&ccu RST_BUS_UART3>; |
| 971 |
status = "disabled"; |
| 972 |
}; |
| 973 |
|
| 974 |
uart4: serial@1c29000 { |
| 975 |
compatible = "snps,dw-apb-uart"; |
| 976 |
reg = <0x01c29000 0x400>; |
| 977 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 978 |
reg-shift = <2>; |
| 979 |
reg-io-width = <4>; |
| 980 |
clocks = <&ccu CLK_BUS_UART4>; |
| 981 |
resets = <&ccu RST_BUS_UART4>; |
| 982 |
status = "disabled"; |
| 983 |
}; |
| 984 |
|
| 985 |
i2c0: i2c@1c2ac00 { |
| 986 |
compatible = "allwinner,sun8i-a83t-i2c", |
| 987 |
"allwinner,sun6i-a31-i2c"; |
| 988 |
reg = <0x01c2ac00 0x400>; |
| 989 |
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 990 |
clocks = <&ccu CLK_BUS_I2C0>; |
| 991 |
resets = <&ccu RST_BUS_I2C0>; |
| 992 |
pinctrl-names = "default"; |
| 993 |
pinctrl-0 = <&i2c0_pins>; |
| 994 |
status = "disabled"; |
| 995 |
#address-cells = <1>; |
| 996 |
#size-cells = <0>; |
| 997 |
}; |
| 998 |
|
| 999 |
i2c1: i2c@1c2b000 { |
| 1000 |
compatible = "allwinner,sun8i-a83t-i2c", |
| 1001 |
"allwinner,sun6i-a31-i2c"; |
| 1002 |
reg = <0x01c2b000 0x400>; |
| 1003 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 1004 |
clocks = <&ccu CLK_BUS_I2C1>; |
| 1005 |
resets = <&ccu RST_BUS_I2C1>; |
| 1006 |
pinctrl-names = "default"; |
| 1007 |
pinctrl-0 = <&i2c1_pins>; |
| 1008 |
status = "disabled"; |
| 1009 |
#address-cells = <1>; |
| 1010 |
#size-cells = <0>; |
| 1011 |
}; |
| 1012 |
|
| 1013 |
i2c2: i2c@1c2b400 { |
| 1014 |
compatible = "allwinner,sun8i-a83t-i2c", |
| 1015 |
"allwinner,sun6i-a31-i2c"; |
| 1016 |
reg = <0x01c2b400 0x400>; |
| 1017 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| 1018 |
clocks = <&ccu CLK_BUS_I2C2>; |
| 1019 |
resets = <&ccu RST_BUS_I2C2>; |
| 1020 |
status = "disabled"; |
| 1021 |
#address-cells = <1>; |
| 1022 |
#size-cells = <0>; |
| 1023 |
}; |
| 1024 |
|
| 1025 |
emac: ethernet@1c30000 { |
| 1026 |
compatible = "allwinner,sun8i-a83t-emac"; |
| 1027 |
syscon = <&syscon>; |
| 1028 |
reg = <0x01c30000 0x104>; |
| 1029 |
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| 1030 |
interrupt-names = "macirq"; |
| 1031 |
clocks = <&ccu CLK_BUS_EMAC>; |
| 1032 |
clock-names = "stmmaceth"; |
| 1033 |
resets = <&ccu RST_BUS_EMAC>; |
| 1034 |
reset-names = "stmmaceth"; |
| 1035 |
status = "disabled"; |
| 1036 |
|
| 1037 |
mdio: mdio { |
| 1038 |
compatible = "snps,dwmac-mdio"; |
| 1039 |
#address-cells = <1>; |
| 1040 |
#size-cells = <0>; |
| 1041 |
}; |
| 1042 |
}; |
| 1043 |
|
| 1044 |
gic: interrupt-controller@1c81000 { |
| 1045 |
compatible = "arm,gic-400"; |
| 1046 |
reg = <0x01c81000 0x1000>, |
| 1047 |
<0x01c82000 0x2000>, |
| 1048 |
<0x01c84000 0x2000>, |
| 1049 |
<0x01c86000 0x2000>; |
| 1050 |
interrupt-controller; |
| 1051 |
#interrupt-cells = <3>; |
| 1052 |
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; |
| 1053 |
}; |
| 1054 |
|
| 1055 |
csi: camera@1cb0000 { |
| 1056 |
compatible = "allwinner,sun8i-a83t-csi"; |
| 1057 |
reg = <0x01cb0000 0x1000>; |
| 1058 |
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 1059 |
clocks = <&ccu CLK_BUS_CSI>, |
| 1060 |
<&ccu CLK_CSI_SCLK>, |
| 1061 |
<&ccu CLK_DRAM_CSI>; |
| 1062 |
clock-names = "bus", "mod", "ram"; |
| 1063 |
resets = <&ccu RST_BUS_CSI>; |
| 1064 |
status = "disabled"; |
| 1065 |
}; |
| 1066 |
|
| 1067 |
hdmi: hdmi@1ee0000 { |
| 1068 |
compatible = "allwinner,sun8i-a83t-dw-hdmi"; |
| 1069 |
reg = <0x01ee0000 0x10000>; |
| 1070 |
reg-io-width = <1>; |
| 1071 |
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| 1072 |
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, |
| 1073 |
<&ccu CLK_HDMI>; |
| 1074 |
clock-names = "iahb", "isfr", "tmds"; |
| 1075 |
resets = <&ccu RST_BUS_HDMI1>; |
| 1076 |
reset-names = "ctrl"; |
| 1077 |
phys = <&hdmi_phy>; |
| 1078 |
phy-names = "phy"; |
| 1079 |
pinctrl-names = "default"; |
| 1080 |
pinctrl-0 = <&hdmi_pins>; |
| 1081 |
status = "disabled"; |
| 1082 |
|
| 1083 |
ports { |
| 1084 |
#address-cells = <1>; |
| 1085 |
#size-cells = <0>; |
| 1086 |
|
| 1087 |
hdmi_in: port@0 { |
| 1088 |
reg = <0>; |
| 1089 |
|
| 1090 |
hdmi_in_tcon1: endpoint { |
| 1091 |
remote-endpoint = <&tcon1_out_hdmi>; |
| 1092 |
}; |
| 1093 |
}; |
| 1094 |
|
| 1095 |
hdmi_out: port@1 { |
| 1096 |
reg = <1>; |
| 1097 |
}; |
| 1098 |
}; |
| 1099 |
}; |
| 1100 |
|
| 1101 |
hdmi_phy: hdmi-phy@1ef0000 { |
| 1102 |
compatible = "allwinner,sun8i-a83t-hdmi-phy"; |
| 1103 |
reg = <0x01ef0000 0x10000>; |
| 1104 |
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>; |
| 1105 |
clock-names = "bus", "mod"; |
| 1106 |
resets = <&ccu RST_BUS_HDMI0>; |
| 1107 |
reset-names = "phy"; |
| 1108 |
#phy-cells = <0>; |
| 1109 |
}; |
| 1110 |
|
| 1111 |
r_intc: interrupt-controller@1f00c00 { |
| 1112 |
compatible = "allwinner,sun8i-a83t-r-intc", |
| 1113 |
"allwinner,sun6i-a31-r-intc"; |
| 1114 |
interrupt-controller; |
| 1115 |
#interrupt-cells = <3>; |
| 1116 |
reg = <0x01f00c00 0x400>; |
| 1117 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 1118 |
}; |
| 1119 |
|
| 1120 |
r_ccu: clock@1f01400 { |
| 1121 |
compatible = "allwinner,sun8i-a83t-r-ccu"; |
| 1122 |
reg = <0x01f01400 0x400>; |
| 1123 |
clocks = <&osc24M>, <&osc16Md512>, <&osc16M>, |
| 1124 |
<&ccu CLK_PLL_PERIPH>; |
| 1125 |
clock-names = "hosc", "losc", "iosc", "pll-periph"; |
| 1126 |
#clock-cells = <1>; |
| 1127 |
#reset-cells = <1>; |
| 1128 |
}; |
| 1129 |
|
| 1130 |
cpucfg@1f01c00 { |
| 1131 |
compatible = "allwinner,sun8i-a83t-r-cpucfg"; |
| 1132 |
reg = <0x1f01c00 0x400>; |
| 1133 |
}; |
| 1134 |
|
| 1135 |
r_cir: ir@1f02000 { |
| 1136 |
compatible = "allwinner,sun8i-a83t-ir", |
| 1137 |
"allwinner,sun6i-a31-ir"; |
| 1138 |
clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; |
| 1139 |
clock-names = "apb", "ir"; |
| 1140 |
resets = <&r_ccu RST_APB0_IR>; |
| 1141 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 1142 |
reg = <0x01f02000 0x400>; |
| 1143 |
pinctrl-names = "default"; |
| 1144 |
pinctrl-0 = <&r_cir_pin>; |
| 1145 |
status = "disabled"; |
| 1146 |
}; |
| 1147 |
|
| 1148 |
r_lradc: lradc@1f03c00 { |
| 1149 |
compatible = "allwinner,sun8i-a83t-r-lradc"; |
| 1150 |
reg = <0x01f03c00 0x100>; |
| 1151 |
interrupt-parent = <&r_intc>; |
| 1152 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 1153 |
status = "disabled"; |
| 1154 |
}; |
| 1155 |
|
| 1156 |
r_pio: pinctrl@1f02c00 { |
| 1157 |
compatible = "allwinner,sun8i-a83t-r-pinctrl"; |
| 1158 |
reg = <0x01f02c00 0x400>; |
| 1159 |
interrupt-parent = <&r_intc>; |
| 1160 |
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| 1161 |
clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, |
| 1162 |
<&osc16Md512>; |
| 1163 |
clock-names = "apb", "hosc", "losc"; |
| 1164 |
gpio-controller; |
| 1165 |
#gpio-cells = <3>; |
| 1166 |
interrupt-controller; |
| 1167 |
#interrupt-cells = <3>; |
| 1168 |
|
| 1169 |
r_cir_pin: r-cir-pin { |
| 1170 |
pins = "PL12"; |
| 1171 |
function = "s_cir_rx"; |
| 1172 |
}; |
| 1173 |
|
| 1174 |
r_rsb_pins: r-rsb-pins { |
| 1175 |
pins = "PL0", "PL1"; |
| 1176 |
function = "s_rsb"; |
| 1177 |
drive-strength = <20>; |
| 1178 |
bias-pull-up; |
| 1179 |
}; |
| 1180 |
}; |
| 1181 |
|
| 1182 |
r_rsb: rsb@1f03400 { |
| 1183 |
compatible = "allwinner,sun8i-a83t-rsb", |
| 1184 |
"allwinner,sun8i-a23-rsb"; |
| 1185 |
reg = <0x01f03400 0x400>; |
| 1186 |
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 1187 |
clocks = <&r_ccu CLK_APB0_RSB>; |
| 1188 |
clock-frequency = <3000000>; |
| 1189 |
resets = <&r_ccu RST_APB0_RSB>; |
| 1190 |
pinctrl-names = "default"; |
| 1191 |
pinctrl-0 = <&r_rsb_pins>; |
| 1192 |
status = "disabled"; |
| 1193 |
#address-cells = <1>; |
| 1194 |
#size-cells = <0>; |
| 1195 |
}; |
| 1196 |
|
| 1197 |
ths: thermal-sensor@1f04000 { |
| 1198 |
compatible = "allwinner,sun8i-a83t-ths"; |
| 1199 |
reg = <0x01f04000 0x100>; |
| 1200 |
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 1201 |
nvmem-cells = <&ths_calibration>; |
| 1202 |
nvmem-cell-names = "calibration"; |
| 1203 |
#thermal-sensor-cells = <1>; |
| 1204 |
}; |
| 1205 |
}; |
| 1206 |
|
| 1207 |
thermal-zones { |
| 1208 |
cpu0_thermal: cpu0-thermal { |
| 1209 |
polling-delay-passive = <0>; |
| 1210 |
polling-delay = <0>; |
| 1211 |
thermal-sensors = <&ths 0>; |
| 1212 |
|
| 1213 |
trips { |
| 1214 |
cpu0_hot: cpu-hot { |
| 1215 |
temperature = <80000>; |
| 1216 |
hysteresis = <2000>; |
| 1217 |
type = "passive"; |
| 1218 |
}; |
| 1219 |
|
| 1220 |
cpu0_very_hot: cpu-very-hot { |
| 1221 |
temperature = <100000>; |
| 1222 |
hysteresis = <0>; |
| 1223 |
type = "critical"; |
| 1224 |
}; |
| 1225 |
}; |
| 1226 |
|
| 1227 |
cooling-maps { |
| 1228 |
map0 { |
| 1229 |
trip = <&cpu0_hot>; |
| 1230 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1231 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1232 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1233 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1234 |
}; |
| 1235 |
}; |
| 1236 |
}; |
| 1237 |
|
| 1238 |
cpu1_thermal: cpu1-thermal { |
| 1239 |
polling-delay-passive = <0>; |
| 1240 |
polling-delay = <0>; |
| 1241 |
thermal-sensors = <&ths 1>; |
| 1242 |
|
| 1243 |
trips { |
| 1244 |
cpu1_hot: cpu-hot { |
| 1245 |
temperature = <80000>; |
| 1246 |
hysteresis = <2000>; |
| 1247 |
type = "passive"; |
| 1248 |
}; |
| 1249 |
|
| 1250 |
cpu1_very_hot: cpu-very-hot { |
| 1251 |
temperature = <100000>; |
| 1252 |
hysteresis = <0>; |
| 1253 |
type = "critical"; |
| 1254 |
}; |
| 1255 |
}; |
| 1256 |
|
| 1257 |
cooling-maps { |
| 1258 |
map0 { |
| 1259 |
trip = <&cpu1_hot>; |
| 1260 |
cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1261 |
<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1262 |
<&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 1263 |
<&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 1264 |
}; |
| 1265 |
}; |
| 1266 |
}; |
| 1267 |
|
| 1268 |
gpu_thermal: gpu-thermal { |
| 1269 |
polling-delay-passive = <0>; |
| 1270 |
polling-delay = <0>; |
| 1271 |
thermal-sensors = <&ths 2>; |
| 1272 |
}; |
| 1273 |
}; |
| 1274 |
}; |