| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Device Tree Source for A20-SOM204-EVB Board |
| 4 |
* |
| 5 |
* Copyright (C) 2018 Olimex Ltd. |
| 6 |
* Author: Stefan Mavrodiev <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
#include "sun7i-a20.dtsi" |
| 11 |
#include "sunxi-common-regulators.dtsi" |
| 12 |
|
| 13 |
|
| 14 |
#include <dt-bindings/gpio/gpio.h> |
| 15 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 16 |
#include <dt-bindings/pwm/pwm.h> |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "Olimex A20-SOM204-EVB"; |
| 20 |
compatible = "olimex,a20-olimex-som204-evb", "allwinner,sun7i-a20"; |
| 21 |
|
| 22 |
aliases { |
| 23 |
serial0 = &uart0; |
| 24 |
serial1 = &uart4; |
| 25 |
serial2 = &uart7; |
| 26 |
spi0 = &spi1; |
| 27 |
spi1 = &spi2; |
| 28 |
ethernet1 = &rtl8723bs; |
| 29 |
}; |
| 30 |
|
| 31 |
chosen { |
| 32 |
stdout-path = "serial0:115200n8"; |
| 33 |
}; |
| 34 |
|
| 35 |
hdmi-connector { |
| 36 |
compatible = "hdmi-connector"; |
| 37 |
type = "a"; |
| 38 |
|
| 39 |
port { |
| 40 |
hdmi_con_in: endpoint { |
| 41 |
remote-endpoint = <&hdmi_out_con>; |
| 42 |
}; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
leds { |
| 47 |
compatible = "gpio-leds"; |
| 48 |
|
| 49 |
led-0 { |
| 50 |
label = "a20-som204-evb:green:stat"; |
| 51 |
gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>; |
| 52 |
default-state = "on"; |
| 53 |
}; |
| 54 |
|
| 55 |
led-1 { |
| 56 |
label = "a20-som204-evb:green:led1"; |
| 57 |
gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>; |
| 58 |
default-state = "on"; |
| 59 |
}; |
| 60 |
|
| 61 |
led-2 { |
| 62 |
label = "a20-som204-evb:yellow:led2"; |
| 63 |
gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>; |
| 64 |
default-state = "on"; |
| 65 |
}; |
| 66 |
}; |
| 67 |
|
| 68 |
rtl_pwrseq: pwrseq-0 { |
| 69 |
compatible = "mmc-pwrseq-simple"; |
| 70 |
reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
&ahci { |
| 75 |
target-supply = <®_ahci_5v>; |
| 76 |
status = "okay"; |
| 77 |
}; |
| 78 |
|
| 79 |
&can0 { |
| 80 |
pinctrl-names = "default"; |
| 81 |
pinctrl-0 = <&can_ph_pins>; |
| 82 |
status = "okay"; |
| 83 |
}; |
| 84 |
|
| 85 |
&codec { |
| 86 |
status = "okay"; |
| 87 |
}; |
| 88 |
|
| 89 |
&cpu0 { |
| 90 |
cpu-supply = <®_dcdc2>; |
| 91 |
}; |
| 92 |
|
| 93 |
&de { |
| 94 |
status = "okay"; |
| 95 |
}; |
| 96 |
|
| 97 |
&ehci0 { |
| 98 |
status = "okay"; |
| 99 |
}; |
| 100 |
|
| 101 |
&ehci1 { |
| 102 |
status = "okay"; |
| 103 |
}; |
| 104 |
|
| 105 |
&gmac { |
| 106 |
pinctrl-names = "default"; |
| 107 |
pinctrl-0 = <&gmac_rgmii_pins>; |
| 108 |
phy-handle = <&phy3>; |
| 109 |
phy-mode = "rgmii"; |
| 110 |
phy-supply = <®_vcc3v3>; |
| 111 |
status = "okay"; |
| 112 |
}; |
| 113 |
|
| 114 |
&hdmi { |
| 115 |
status = "okay"; |
| 116 |
}; |
| 117 |
|
| 118 |
&hdmi_out { |
| 119 |
hdmi_out_con: endpoint { |
| 120 |
remote-endpoint = <&hdmi_con_in>; |
| 121 |
}; |
| 122 |
}; |
| 123 |
|
| 124 |
&i2c0 { |
| 125 |
status = "okay"; |
| 126 |
|
| 127 |
axp209: pmic@34 { |
| 128 |
reg = <0x34>; |
| 129 |
interrupt-parent = <&nmi_intc>; |
| 130 |
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 131 |
}; |
| 132 |
}; |
| 133 |
|
| 134 |
/* Exposed to UEXT1 */ |
| 135 |
&i2c1 { |
| 136 |
status = "okay"; |
| 137 |
|
| 138 |
eeprom: eeprom@50 { |
| 139 |
compatible = "atmel,24c16"; |
| 140 |
reg = <0x50>; |
| 141 |
pagesize = <16>; |
| 142 |
}; |
| 143 |
}; |
| 144 |
|
| 145 |
/* Exposed to UEXT2 */ |
| 146 |
&i2c2 { |
| 147 |
status = "okay"; |
| 148 |
}; |
| 149 |
|
| 150 |
&ir0 { |
| 151 |
pinctrl-names = "default"; |
| 152 |
pinctrl-0 = <&ir0_rx_pin>; |
| 153 |
status = "okay"; |
| 154 |
}; |
| 155 |
|
| 156 |
&gmac_mdio { |
| 157 |
phy3: ethernet-phy@3 { |
| 158 |
reg = <3>; |
| 159 |
reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */ |
| 160 |
reset-assert-us = <10000>; |
| 161 |
/* wait 1s after reset, otherwise fail to read phy id */ |
| 162 |
reset-deassert-us = <1000000>; |
| 163 |
}; |
| 164 |
}; |
| 165 |
|
| 166 |
&mmc0 { |
| 167 |
vmmc-supply = <®_vcc3v3>; |
| 168 |
bus-width = <4>; |
| 169 |
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; |
| 170 |
status = "okay"; |
| 171 |
}; |
| 172 |
|
| 173 |
&mmc3 { |
| 174 |
vmmc-supply = <®_vcc3v3>; |
| 175 |
mmc-pwrseq = <&rtl_pwrseq>; |
| 176 |
bus-width = <4>; |
| 177 |
non-removable; |
| 178 |
status = "okay"; |
| 179 |
|
| 180 |
rtl8723bs: wifi@1 { |
| 181 |
reg = <1>; |
| 182 |
}; |
| 183 |
}; |
| 184 |
|
| 185 |
&ohci0 { |
| 186 |
status = "okay"; |
| 187 |
}; |
| 188 |
|
| 189 |
&ohci1 { |
| 190 |
status = "okay"; |
| 191 |
}; |
| 192 |
|
| 193 |
&otg_sram { |
| 194 |
status = "okay"; |
| 195 |
}; |
| 196 |
|
| 197 |
&pio { |
| 198 |
uart3_rts_pin: uart3-rts-pin { |
| 199 |
pins = "PG8"; |
| 200 |
function = "uart3"; |
| 201 |
}; |
| 202 |
}; |
| 203 |
|
| 204 |
#include "axp209.dtsi" |
| 205 |
|
| 206 |
&ac_power_supply { |
| 207 |
status = "okay"; |
| 208 |
}; |
| 209 |
|
| 210 |
&battery_power_supply { |
| 211 |
status = "okay"; |
| 212 |
}; |
| 213 |
|
| 214 |
®_ahci_5v { |
| 215 |
gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; |
| 216 |
status = "okay"; |
| 217 |
}; |
| 218 |
|
| 219 |
®_dcdc2 { |
| 220 |
regulator-always-on; |
| 221 |
regulator-min-microvolt = <1000000>; |
| 222 |
regulator-max-microvolt = <1400000>; |
| 223 |
regulator-name = "vdd-cpu"; |
| 224 |
}; |
| 225 |
|
| 226 |
®_dcdc3 { |
| 227 |
regulator-always-on; |
| 228 |
regulator-min-microvolt = <1000000>; |
| 229 |
regulator-max-microvolt = <1400000>; |
| 230 |
regulator-name = "vdd-int-dll"; |
| 231 |
}; |
| 232 |
|
| 233 |
®_ldo1 { |
| 234 |
regulator-always-on; |
| 235 |
regulator-min-microvolt = <1300000>; |
| 236 |
regulator-max-microvolt = <1300000>; |
| 237 |
regulator-name = "vdd-rtc"; |
| 238 |
}; |
| 239 |
|
| 240 |
®_ldo2 { |
| 241 |
regulator-always-on; |
| 242 |
regulator-min-microvolt = <3000000>; |
| 243 |
regulator-max-microvolt = <3000000>; |
| 244 |
regulator-name = "avcc"; |
| 245 |
}; |
| 246 |
|
| 247 |
®_ldo4 { |
| 248 |
regulator-min-microvolt = <3300000>; |
| 249 |
regulator-max-microvolt = <3300000>; |
| 250 |
regulator-name = "vcc-pg"; |
| 251 |
}; |
| 252 |
|
| 253 |
®_usb0_vbus { |
| 254 |
gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; |
| 255 |
status = "okay"; |
| 256 |
}; |
| 257 |
|
| 258 |
®_usb1_vbus { |
| 259 |
status = "okay"; |
| 260 |
}; |
| 261 |
|
| 262 |
®_usb2_vbus { |
| 263 |
status = "okay"; |
| 264 |
}; |
| 265 |
|
| 266 |
/* Exposed to UEXT1 */ |
| 267 |
&spi1 { |
| 268 |
pinctrl-names = "default"; |
| 269 |
pinctrl-0 = <&spi1_pi_pins>, |
| 270 |
<&spi1_cs0_pi_pin>; |
| 271 |
status = "okay"; |
| 272 |
}; |
| 273 |
|
| 274 |
/* Exposed to UEXT2 */ |
| 275 |
&spi2 { |
| 276 |
pinctrl-names = "default"; |
| 277 |
pinctrl-0 = <&spi2_pc_pins>, |
| 278 |
<&spi2_cs0_pc_pin>; |
| 279 |
status = "okay"; |
| 280 |
}; |
| 281 |
|
| 282 |
&uart0 { |
| 283 |
pinctrl-names = "default"; |
| 284 |
pinctrl-0 = <&uart0_pb_pins>; |
| 285 |
status = "okay"; |
| 286 |
}; |
| 287 |
|
| 288 |
/* Used for RTL8723BS bluetooth */ |
| 289 |
&uart3 { |
| 290 |
pinctrl-names = "default"; |
| 291 |
pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_pin>; |
| 292 |
status = "okay"; |
| 293 |
}; |
| 294 |
|
| 295 |
/* Exposed to UEXT1 */ |
| 296 |
&uart4 { |
| 297 |
pinctrl-names = "default"; |
| 298 |
pinctrl-0 = <&uart4_pg_pins>; |
| 299 |
status = "okay"; |
| 300 |
}; |
| 301 |
|
| 302 |
/* Exposed to UEXT2 */ |
| 303 |
&uart7 { |
| 304 |
pinctrl-names = "default"; |
| 305 |
pinctrl-0 = <&uart7_pi_pins>; |
| 306 |
status = "okay"; |
| 307 |
}; |
| 308 |
|
| 309 |
&usb_otg { |
| 310 |
dr_mode = "otg"; |
| 311 |
status = "okay"; |
| 312 |
}; |
| 313 |
|
| 314 |
&usb_power_supply { |
| 315 |
status = "okay"; |
| 316 |
}; |
| 317 |
|
| 318 |
&usbphy { |
| 319 |
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ |
| 320 |
usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ |
| 321 |
usb0_vbus_power-supply = <&usb_power_supply>; |
| 322 |
usb0_vbus-supply = <®_usb0_vbus>; |
| 323 |
usb1_vbus-supply = <®_usb1_vbus>; |
| 324 |
usb2_vbus-supply = <®_usb2_vbus>; |
| 325 |
status = "okay"; |
| 326 |
}; |