| 1 |
/* |
| 2 |
* Copyright 2015 Chen-Yu Tsai |
| 3 |
* |
| 4 |
* Chen-Yu Tsai <[email protected]> |
| 5 |
* |
| 6 |
* This file is dual-licensed: you can use it either under the terms |
| 7 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 8 |
* licensing only applies to this file, and not this project as a |
| 9 |
* whole. |
| 10 |
* |
| 11 |
* a) This file is free software; you can redistribute it and/or |
| 12 |
* modify it under the terms of the GNU General Public License as |
| 13 |
* published by the Free Software Foundation; either version 2 of the |
| 14 |
* License, or (at your option) any later version. |
| 15 |
* |
| 16 |
* This file is distributed in the hope that it will be useful, |
| 17 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 |
* GNU General Public License for more details. |
| 20 |
* |
| 21 |
* Or, alternatively, |
| 22 |
* |
| 23 |
* b) Permission is hereby granted, free of charge, to any person |
| 24 |
* obtaining a copy of this software and associated documentation |
| 25 |
* files (the "Software"), to deal in the Software without |
| 26 |
* restriction, including without limitation the rights to use, |
| 27 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 28 |
* sell copies of the Software, and to permit persons to whom the |
| 29 |
* Software is furnished to do so, subject to the following |
| 30 |
* conditions: |
| 31 |
* |
| 32 |
* The above copyright notice and this permission notice shall be |
| 33 |
* included in all copies or substantial portions of the Software. |
| 34 |
* |
| 35 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 36 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 37 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 38 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 39 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 40 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 41 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 42 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 43 |
*/ |
| 44 |
|
| 45 |
/dts-v1/; |
| 46 |
#include "sun8i-a83t.dtsi" |
| 47 |
|
| 48 |
#include <dt-bindings/gpio/gpio.h> |
| 49 |
|
| 50 |
/ { |
| 51 |
model = "Cubietech Cubietruck Plus"; |
| 52 |
compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t"; |
| 53 |
|
| 54 |
aliases { |
| 55 |
ethernet0 = &emac; |
| 56 |
serial0 = &uart0; |
| 57 |
}; |
| 58 |
|
| 59 |
chosen { |
| 60 |
stdout-path = "serial0:115200n8"; |
| 61 |
}; |
| 62 |
|
| 63 |
hdmi-connector { |
| 64 |
compatible = "hdmi-connector"; |
| 65 |
type = "a"; |
| 66 |
|
| 67 |
port { |
| 68 |
hdmi_con_in: endpoint { |
| 69 |
remote-endpoint = <&hdmi_out_con>; |
| 70 |
}; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
leds { |
| 75 |
compatible = "gpio-leds"; |
| 76 |
|
| 77 |
led-0 { |
| 78 |
label = "cubietruck-plus:blue:usr"; |
| 79 |
gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */ |
| 80 |
}; |
| 81 |
|
| 82 |
led-1 { |
| 83 |
label = "cubietruck-plus:orange:usr"; |
| 84 |
gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */ |
| 85 |
}; |
| 86 |
|
| 87 |
led-2 { |
| 88 |
label = "cubietruck-plus:white:usr"; |
| 89 |
gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */ |
| 90 |
}; |
| 91 |
|
| 92 |
led-3 { |
| 93 |
label = "cubietruck-plus:green:usr"; |
| 94 |
gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */ |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
usb-hub { |
| 99 |
/* I2C is not connected */ |
| 100 |
compatible = "smsc,usb3503"; |
| 101 |
initial-mode = <1>; /* initialize in HUB mode */ |
| 102 |
disabled-ports = <1>; |
| 103 |
intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ |
| 104 |
reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */ |
| 105 |
connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ |
| 106 |
refclk-frequency = <19200000>; |
| 107 |
}; |
| 108 |
|
| 109 |
reg_usb1_vbus: reg-usb1-vbus { |
| 110 |
compatible = "regulator-fixed"; |
| 111 |
regulator-name = "usb1-vbus"; |
| 112 |
regulator-min-microvolt = <5000000>; |
| 113 |
regulator-max-microvolt = <5000000>; |
| 114 |
regulator-boot-on; |
| 115 |
enable-active-high; |
| 116 |
gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */ |
| 117 |
}; |
| 118 |
|
| 119 |
reg_usb2_vbus: reg-usb2-vbus { |
| 120 |
compatible = "regulator-fixed"; |
| 121 |
regulator-name = "usb2-vbus"; |
| 122 |
regulator-min-microvolt = <5000000>; |
| 123 |
regulator-max-microvolt = <5000000>; |
| 124 |
regulator-boot-on; |
| 125 |
enable-active-high; |
| 126 |
gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ |
| 127 |
}; |
| 128 |
|
| 129 |
sound { |
| 130 |
compatible = "simple-audio-card"; |
| 131 |
simple-audio-card,name = "On-board SPDIF"; |
| 132 |
|
| 133 |
simple-audio-card,cpu { |
| 134 |
sound-dai = <&spdif>; |
| 135 |
}; |
| 136 |
|
| 137 |
simple-audio-card,codec { |
| 138 |
sound-dai = <&spdif_out>; |
| 139 |
}; |
| 140 |
}; |
| 141 |
|
| 142 |
spdif_out: spdif-out { |
| 143 |
#sound-dai-cells = <0>; |
| 144 |
compatible = "linux,spdif-dit"; |
| 145 |
}; |
| 146 |
|
| 147 |
wifi_pwrseq: pwrseq { |
| 148 |
compatible = "mmc-pwrseq-simple"; |
| 149 |
clocks = <&ac100_rtc 1>; |
| 150 |
clock-names = "ext_clock"; |
| 151 |
/* The WiFi low power clock must be 32768 Hz */ |
| 152 |
assigned-clocks = <&ac100_rtc 1>; |
| 153 |
assigned-clock-rates = <32768>; |
| 154 |
/* enables internal regulator and de-asserts reset */ |
| 155 |
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
&cpu0 { |
| 160 |
cpu-supply = <®_dcdc2>; |
| 161 |
}; |
| 162 |
|
| 163 |
&cpu100 { |
| 164 |
cpu-supply = <®_dcdc3>; |
| 165 |
}; |
| 166 |
|
| 167 |
&de { |
| 168 |
status = "okay"; |
| 169 |
}; |
| 170 |
|
| 171 |
&ehci0 { |
| 172 |
/* GL830 USB-to-SATA bridge here */ |
| 173 |
status = "okay"; |
| 174 |
}; |
| 175 |
|
| 176 |
&ehci1 { |
| 177 |
/* USB3503 HSIC USB 2.0 hub here */ |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
&emac { |
| 182 |
pinctrl-names = "default"; |
| 183 |
pinctrl-0 = <&emac_rgmii_pins>; |
| 184 |
phy-supply = <®_dldo4>; |
| 185 |
phy-handle = <&rgmii_phy>; |
| 186 |
phy-mode = "rgmii-id"; |
| 187 |
status = "okay"; |
| 188 |
}; |
| 189 |
|
| 190 |
&hdmi { |
| 191 |
status = "okay"; |
| 192 |
}; |
| 193 |
|
| 194 |
&hdmi_out { |
| 195 |
hdmi_out_con: endpoint { |
| 196 |
remote-endpoint = <&hdmi_con_in>; |
| 197 |
}; |
| 198 |
}; |
| 199 |
|
| 200 |
&mdio { |
| 201 |
rgmii_phy: ethernet-phy@1 { |
| 202 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 203 |
reg = <1>; |
| 204 |
}; |
| 205 |
}; |
| 206 |
|
| 207 |
&mmc0 { |
| 208 |
pinctrl-names = "default"; |
| 209 |
pinctrl-0 = <&mmc0_pins>; |
| 210 |
vmmc-supply = <®_dcdc1>; |
| 211 |
bus-width = <4>; |
| 212 |
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
| 213 |
status = "okay"; |
| 214 |
}; |
| 215 |
|
| 216 |
&mmc1 { |
| 217 |
vmmc-supply = <®_dcdc1>; |
| 218 |
vqmmc-supply = <®_sw>; |
| 219 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 220 |
bus-width = <4>; |
| 221 |
non-removable; |
| 222 |
status = "okay"; |
| 223 |
}; |
| 224 |
|
| 225 |
&mmc2 { |
| 226 |
pinctrl-names = "default"; |
| 227 |
pinctrl-0 = <&mmc2_8bit_emmc_pins>; |
| 228 |
vmmc-supply = <®_dcdc1>; |
| 229 |
bus-width = <8>; |
| 230 |
non-removable; |
| 231 |
cap-mmc-hw-reset; |
| 232 |
status = "okay"; |
| 233 |
}; |
| 234 |
|
| 235 |
&r_rsb { |
| 236 |
status = "okay"; |
| 237 |
|
| 238 |
axp81x: pmic@3a3 { |
| 239 |
compatible = "x-powers,axp818", "x-powers,axp813"; |
| 240 |
reg = <0x3a3>; |
| 241 |
interrupt-parent = <&r_intc>; |
| 242 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; |
| 243 |
eldoin-supply = <®_dcdc1>; |
| 244 |
swin-supply = <®_dcdc1>; |
| 245 |
x-powers,drive-vbus-en; |
| 246 |
}; |
| 247 |
|
| 248 |
ac100: codec@e89 { |
| 249 |
compatible = "x-powers,ac100"; |
| 250 |
reg = <0xe89>; |
| 251 |
|
| 252 |
ac100_codec: codec { |
| 253 |
compatible = "x-powers,ac100-codec"; |
| 254 |
interrupt-parent = <&r_pio>; |
| 255 |
interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */ |
| 256 |
#clock-cells = <0>; |
| 257 |
clock-output-names = "4M_adda"; |
| 258 |
}; |
| 259 |
|
| 260 |
ac100_rtc: rtc { |
| 261 |
compatible = "x-powers,ac100-rtc"; |
| 262 |
interrupt-parent = <&r_intc>; |
| 263 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; |
| 264 |
clocks = <&ac100_codec>; |
| 265 |
#clock-cells = <1>; |
| 266 |
clock-output-names = "cko1_rtc", |
| 267 |
"cko2_rtc", |
| 268 |
"cko3_rtc"; |
| 269 |
}; |
| 270 |
}; |
| 271 |
}; |
| 272 |
|
| 273 |
#include "axp81x.dtsi" |
| 274 |
|
| 275 |
&ac_power_supply { |
| 276 |
status = "okay"; |
| 277 |
}; |
| 278 |
|
| 279 |
&battery_power_supply { |
| 280 |
status = "okay"; |
| 281 |
}; |
| 282 |
|
| 283 |
®_aldo1 { |
| 284 |
regulator-always-on; |
| 285 |
regulator-min-microvolt = <1800000>; |
| 286 |
regulator-max-microvolt = <1800000>; |
| 287 |
regulator-name = "vcc-1v8"; |
| 288 |
}; |
| 289 |
|
| 290 |
®_aldo2 { |
| 291 |
regulator-always-on; |
| 292 |
regulator-min-microvolt = <1800000>; |
| 293 |
regulator-max-microvolt = <1800000>; |
| 294 |
regulator-name = "dram-pll"; |
| 295 |
}; |
| 296 |
|
| 297 |
®_aldo3 { |
| 298 |
regulator-always-on; |
| 299 |
regulator-min-microvolt = <3000000>; |
| 300 |
regulator-max-microvolt = <3000000>; |
| 301 |
regulator-name = "avcc"; |
| 302 |
}; |
| 303 |
|
| 304 |
®_dcdc1 { |
| 305 |
/* |
| 306 |
* The schematics say this should be 3.3V, but the FEX file says |
| 307 |
* it should be 3V. The latter makes sense, as the WiFi module's |
| 308 |
* I/O is indirectly powered from DCDC1, through SW. It is rated |
| 309 |
* at 2.98V maximum. |
| 310 |
*/ |
| 311 |
regulator-always-on; |
| 312 |
regulator-min-microvolt = <3000000>; |
| 313 |
regulator-max-microvolt = <3000000>; |
| 314 |
regulator-name = "vcc-3v"; |
| 315 |
}; |
| 316 |
|
| 317 |
®_dcdc2 { |
| 318 |
regulator-always-on; |
| 319 |
regulator-min-microvolt = <700000>; |
| 320 |
regulator-max-microvolt = <1100000>; |
| 321 |
regulator-name = "vdd-cpua"; |
| 322 |
}; |
| 323 |
|
| 324 |
®_dcdc3 { |
| 325 |
regulator-always-on; |
| 326 |
regulator-min-microvolt = <700000>; |
| 327 |
regulator-max-microvolt = <1100000>; |
| 328 |
regulator-name = "vdd-cpub"; |
| 329 |
}; |
| 330 |
|
| 331 |
®_dcdc4 { |
| 332 |
regulator-min-microvolt = <700000>; |
| 333 |
regulator-max-microvolt = <1100000>; |
| 334 |
regulator-name = "vdd-gpu"; |
| 335 |
}; |
| 336 |
|
| 337 |
®_dcdc5 { |
| 338 |
regulator-always-on; |
| 339 |
regulator-min-microvolt = <1500000>; |
| 340 |
regulator-max-microvolt = <1500000>; |
| 341 |
regulator-name = "vcc-dram"; |
| 342 |
}; |
| 343 |
|
| 344 |
®_dcdc6 { |
| 345 |
regulator-always-on; |
| 346 |
regulator-min-microvolt = <900000>; |
| 347 |
regulator-max-microvolt = <900000>; |
| 348 |
regulator-name = "vdd-sys"; |
| 349 |
}; |
| 350 |
|
| 351 |
®_dldo2 { |
| 352 |
regulator-min-microvolt = <3300000>; |
| 353 |
regulator-max-microvolt = <3300000>; |
| 354 |
regulator-name = "dp-pwr"; |
| 355 |
}; |
| 356 |
|
| 357 |
®_dldo3 { |
| 358 |
regulator-always-on; |
| 359 |
regulator-min-microvolt = <2500000>; |
| 360 |
regulator-max-microvolt = <2500000>; |
| 361 |
regulator-name = "ephy-io"; |
| 362 |
}; |
| 363 |
|
| 364 |
®_dldo4 { |
| 365 |
/* |
| 366 |
* The PHY requires 20ms after all voltages are applied until core |
| 367 |
* logic is ready and 30ms after the reset pin is de-asserted. |
| 368 |
* Set a 100ms delay to account for PMIC ramp time and board traces. |
| 369 |
*/ |
| 370 |
regulator-enable-ramp-delay = <100000>; |
| 371 |
regulator-min-microvolt = <3300000>; |
| 372 |
regulator-max-microvolt = <3300000>; |
| 373 |
regulator-name = "ephy"; |
| 374 |
}; |
| 375 |
|
| 376 |
®_drivevbus { |
| 377 |
regulator-name = "usb0-vbus"; |
| 378 |
status = "okay"; |
| 379 |
}; |
| 380 |
|
| 381 |
®_eldo1 { |
| 382 |
regulator-min-microvolt = <1200000>; |
| 383 |
regulator-max-microvolt = <1200000>; |
| 384 |
regulator-name = "dp-bridge-1"; |
| 385 |
}; |
| 386 |
|
| 387 |
®_eldo2 { |
| 388 |
regulator-min-microvolt = <1200000>; |
| 389 |
regulator-max-microvolt = <1200000>; |
| 390 |
regulator-name = "dp-bridge-2"; |
| 391 |
}; |
| 392 |
|
| 393 |
®_fldo1 { |
| 394 |
/* TODO should be handled by USB PHY */ |
| 395 |
regulator-always-on; |
| 396 |
regulator-min-microvolt = <1080000>; |
| 397 |
regulator-max-microvolt = <1320000>; |
| 398 |
regulator-name = "vdd12-hsic"; |
| 399 |
}; |
| 400 |
|
| 401 |
®_fldo2 { |
| 402 |
/* |
| 403 |
* Despite the embedded CPUs core not being used in any way, |
| 404 |
* this must remain on or the system will hang. |
| 405 |
*/ |
| 406 |
regulator-always-on; |
| 407 |
regulator-min-microvolt = <700000>; |
| 408 |
regulator-max-microvolt = <1100000>; |
| 409 |
regulator-name = "vdd-cpus"; |
| 410 |
}; |
| 411 |
|
| 412 |
®_rtc_ldo { |
| 413 |
regulator-name = "vcc-rtc"; |
| 414 |
}; |
| 415 |
|
| 416 |
®_sw { |
| 417 |
regulator-name = "vcc-wifi-io"; |
| 418 |
}; |
| 419 |
|
| 420 |
&spdif { |
| 421 |
status = "okay"; |
| 422 |
}; |
| 423 |
|
| 424 |
&uart0 { |
| 425 |
pinctrl-names = "default"; |
| 426 |
pinctrl-0 = <&uart0_pb_pins>; |
| 427 |
status = "okay"; |
| 428 |
}; |
| 429 |
|
| 430 |
&uart1 { |
| 431 |
pinctrl-names = "default"; |
| 432 |
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; |
| 433 |
uart-has-rtscts; |
| 434 |
status = "okay"; |
| 435 |
|
| 436 |
bluetooth { |
| 437 |
compatible = "brcm,bcm4330-bt"; |
| 438 |
clocks = <&ac100_rtc 1>; |
| 439 |
clock-names = "lpo"; |
| 440 |
vbat-supply = <®_dcdc1>; |
| 441 |
vddio-supply = <®_sw>; |
| 442 |
device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ |
| 443 |
host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ |
| 444 |
shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ |
| 445 |
}; |
| 446 |
}; |
| 447 |
|
| 448 |
&usb_otg { |
| 449 |
dr_mode = "otg"; |
| 450 |
status = "okay"; |
| 451 |
}; |
| 452 |
|
| 453 |
&usb_power_supply { |
| 454 |
status = "okay"; |
| 455 |
}; |
| 456 |
|
| 457 |
&usbphy { |
| 458 |
usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ |
| 459 |
usb0_vbus_power-supply = <&usb_power_supply>; |
| 460 |
usb0_vbus-supply = <®_drivevbus>; |
| 461 |
usb1_vbus-supply = <®_usb1_vbus>; |
| 462 |
usb2_vbus-supply = <®_usb2_vbus>; |
| 463 |
status = "okay"; |
| 464 |
}; |