| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (C) 2019 Igor Pecovnik <[email protected]> |
| 4 |
* Copyright (C) 2020 Jayantajit Gogoi <[email protected]> |
| 5 |
* Copyright (C) 2020 Yu-Tung Chang <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "sun8i-h3-nanopi.dtsi" |
| 9 |
#include <dt-bindings/leds/common.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "FriendlyARM NanoPi R1"; |
| 13 |
compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3"; |
| 14 |
|
| 15 |
aliases { |
| 16 |
serial1 = &uart1; |
| 17 |
ethernet0 = &emac; |
| 18 |
ethernet1 = &wifi; |
| 19 |
}; |
| 20 |
|
| 21 |
reg_gmac_3v3: gmac-3v3 { |
| 22 |
compatible = "regulator-fixed"; |
| 23 |
regulator-name = "gmac-3v3"; |
| 24 |
regulator-min-microvolt = <3300000>; |
| 25 |
regulator-max-microvolt = <3300000>; |
| 26 |
startup-delay-us = <100000>; |
| 27 |
enable-active-high; |
| 28 |
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ |
| 29 |
}; |
| 30 |
|
| 31 |
reg_vdd_cpux: gpio-regulator { |
| 32 |
compatible = "regulator-gpio"; |
| 33 |
regulator-name = "vdd-cpux"; |
| 34 |
regulator-type = "voltage"; |
| 35 |
regulator-boot-on; |
| 36 |
regulator-always-on; |
| 37 |
regulator-min-microvolt = <1100000>; |
| 38 |
regulator-max-microvolt = <1300000>; |
| 39 |
regulator-ramp-delay = <50>; |
| 40 |
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ |
| 41 |
gpios-states = <0x1>; |
| 42 |
states = <1100000 0x0>, |
| 43 |
<1300000 0x1>; |
| 44 |
}; |
| 45 |
|
| 46 |
wifi_pwrseq: pwrseq { |
| 47 |
compatible = "mmc-pwrseq-simple"; |
| 48 |
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ |
| 49 |
clocks = <&rtc CLK_OSC32K_FANOUT>; |
| 50 |
clock-names = "ext_clock"; |
| 51 |
}; |
| 52 |
|
| 53 |
leds { |
| 54 |
led-2 { |
| 55 |
function = LED_FUNCTION_WAN; |
| 56 |
color = <LED_COLOR_ID_GREEN>; |
| 57 |
gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ |
| 58 |
}; |
| 59 |
|
| 60 |
led-3 { |
| 61 |
function = LED_FUNCTION_LAN; |
| 62 |
color = <LED_COLOR_ID_GREEN>; |
| 63 |
gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; /* PA9 */ |
| 64 |
}; |
| 65 |
}; |
| 66 |
}; |
| 67 |
|
| 68 |
&cpu0 { |
| 69 |
cpu-supply = <®_vdd_cpux>; |
| 70 |
}; |
| 71 |
|
| 72 |
&ehci1 { |
| 73 |
status = "okay"; |
| 74 |
}; |
| 75 |
|
| 76 |
&ehci2 { |
| 77 |
status = "okay"; |
| 78 |
}; |
| 79 |
|
| 80 |
&emac { |
| 81 |
pinctrl-names = "default"; |
| 82 |
pinctrl-0 = <&emac_rgmii_pins>; |
| 83 |
phy-supply = <®_gmac_3v3>; |
| 84 |
phy-handle = <&ext_rgmii_phy>; |
| 85 |
phy-mode = "rgmii-id"; |
| 86 |
status = "okay"; |
| 87 |
}; |
| 88 |
|
| 89 |
&external_mdio { |
| 90 |
ext_rgmii_phy: ethernet-phy@7 { |
| 91 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 92 |
reg = <7>; |
| 93 |
}; |
| 94 |
}; |
| 95 |
|
| 96 |
&mmc1 { |
| 97 |
vmmc-supply = <®_vcc3v3>; |
| 98 |
vqmmc-supply = <®_vcc3v3>; |
| 99 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 100 |
bus-width = <4>; |
| 101 |
non-removable; |
| 102 |
status = "okay"; |
| 103 |
|
| 104 |
wifi: wifi@1 { |
| 105 |
reg = <1>; |
| 106 |
compatible = "brcm,bcm4329-fmac"; |
| 107 |
interrupt-parent = <&pio>; |
| 108 |
interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ |
| 109 |
interrupt-names = "host-wake"; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
&mmc2 { |
| 114 |
pinctrl-names = "default"; |
| 115 |
pinctrl-0 = <&mmc2_8bit_pins>; |
| 116 |
vmmc-supply = <®_vcc3v3>; |
| 117 |
vqmmc-supply = <®_vcc3v3>; |
| 118 |
bus-width = <8>; |
| 119 |
non-removable; |
| 120 |
status = "okay"; |
| 121 |
}; |
| 122 |
|
| 123 |
&ohci1 { |
| 124 |
status = "okay"; |
| 125 |
}; |
| 126 |
|
| 127 |
&ohci2 { |
| 128 |
status = "okay"; |
| 129 |
}; |
| 130 |
|
| 131 |
®_usb0_vbus { |
| 132 |
gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ |
| 133 |
status = "okay"; |
| 134 |
}; |
| 135 |
|
| 136 |
&uart1 { |
| 137 |
pinctrl-names = "default"; |
| 138 |
pinctrl-0 = <&uart1_pins>; |
| 139 |
status = "okay"; |
| 140 |
}; |
| 141 |
|
| 142 |
&uart3 { |
| 143 |
pinctrl-names = "default"; |
| 144 |
pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>; |
| 145 |
uart-has-rtscts; |
| 146 |
status = "okay"; |
| 147 |
|
| 148 |
bluetooth { |
| 149 |
compatible = "brcm,bcm43438-bt"; |
| 150 |
clocks = <&rtc CLK_OSC32K_FANOUT>; |
| 151 |
clock-names = "lpo"; |
| 152 |
vbat-supply = <®_vcc3v3>; |
| 153 |
vddio-supply = <®_vcc3v3>; |
| 154 |
device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ |
| 155 |
host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ |
| 156 |
shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ |
| 157 |
}; |
| 158 |
}; |
| 159 |
|
| 160 |
&usb_otg { |
| 161 |
status = "okay"; |
| 162 |
dr_mode = "otg"; |
| 163 |
}; |
| 164 |
|
| 165 |
&usbphy { |
| 166 |
usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ |
| 167 |
usb0_vbus-supply = <®_usb0_vbus>; |
| 168 |
status = "okay"; |
| 169 |
}; |