Debian Codegraph @

arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (C) 2025 Lukas Schmid <[email protected]>
4 */
5
6 /dts-v1/;
7 #include "sun8i-v3s.dtsi"
8
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/gpio/gpio.h>
12
13 /{
14 model = "NetCube Systems Kumquat";
15 compatible = "netcube,kumquat", "allwinner,sun8i-v3s";
16
17 aliases {
18 serial0 = &uart0;
19 ethernet0 = &emac;
20 rtc0 = &ds3232;
21 rtc1 = &rtc; /* not battery backed */
22 };
23
24 chosen {
25 stdout-path = "serial0:115200n8";
26 };
27
28 /* 40 MHz Crystal Oscillator on PCB */
29 clk_can0: clock-can0 {
30 compatible = "fixed-clock";
31 #clock-cells = <0>;
32 clock-frequency = <40000000>;
33 };
34
35 gpio-keys {
36 compatible = "gpio-keys";
37 autorepeat;
38
39 key-user {
40 label = "GPIO Key User";
41 linux,code = <KEY_PROG1>;
42 gpios = <&pio 1 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PB2 */
43 };
44 };
45
46 leds {
47 compatible = "gpio-leds";
48
49 led-heartbeat {
50 gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
51 linux,default-trigger = "heartbeat";
52 color = <LED_COLOR_ID_GREEN>;
53 function = LED_FUNCTION_HEARTBEAT;
54 };
55
56 led-mmc0-act {
57 gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
58 linux,default-trigger = "mmc0";
59 color = <LED_COLOR_ID_GREEN>;
60 function = LED_FUNCTION_DISK;
61 };
62 };
63
64 /* EA3036C Switching 3 Channel Regulator - Channel 2 */
65 reg_vcc3v3: regulator-3v3 {
66 compatible = "regulator-fixed";
67 regulator-name = "vcc3v3";
68 regulator-min-microvolt = <3300000>;
69 regulator-max-microvolt = <3300000>;
70 vin-supply = <&reg_vcc5v0>;
71 };
72
73 /* K7805-1000R3 Switching Regulator supplied from main 12/24V terminal block */
74 reg_vcc5v0: regulator-5v0 {
75 compatible = "regulator-fixed";
76 regulator-name = "vcc5v0";
77 regulator-min-microvolt = <5000000>;
78 regulator-max-microvolt = <5000000>;
79 };
80 };
81
82 &codec {
83 allwinner,audio-routing =
84 "Headphone", "HP",
85 "Headphone", "HPCOM",
86 "MIC1", "Mic",
87 "Mic", "HBIAS";
88 status = "okay";
89 };
90
91 &ehci {
92 status = "okay";
93 };
94
95 &emac {
96 allwinner,leds-active-low;
97 nvmem-cells = <&eth0_macaddress>;
98 nvmem-cell-names = "mac-address";
99 status = "okay";
100 };
101
102 &i2c0 {
103 status = "okay";
104
105 eeprom0: eeprom@50 {
106 compatible = "atmel,24c02"; /* actually it's a 24AA02E48 */
107 reg = <0x50>;
108 pagesize = <16>;
109 read-only;
110 vcc-supply = <&reg_vcc3v3>;
111
112 #address-cells = <1>;
113 #size-cells = <1>;
114
115 eth0_macaddress: macaddress@fa {
116 reg = <0xfa 0x06>;
117 };
118 };
119
120 tusb320: typec@60 {
121 compatible = "ti,tusb320";
122 reg = <0x60>;
123 interrupts-extended = <&pio 1 5 IRQ_TYPE_LEVEL_LOW>; /* PB5 */
124 };
125
126 ds3232: rtc@68 {
127 compatible = "dallas,ds3232";
128 reg = <0x68>;
129 };
130 };
131
132 /* Exposed as the Flash/SD Header on the board */
133 &mmc0 {
134 vmmc-supply = <&reg_vcc3v3>;
135 bus-width = <4>;
136 broken-cd;
137 status = "okay";
138 };
139
140 /* Connected to the on-board ESP32 */
141 &mmc1 {
142 vmmc-supply = <&reg_vcc3v3>;
143 bus-width = <4>;
144 broken-cd;
145 status = "okay";
146 };
147
148 &ohci {
149 status = "okay";
150 };
151
152 /* Disable external 32k osc as it is broken on current revision */
153 &osc32k {
154 status = "disabled";
155 };
156
157 &pio {
158 vcc-pb-supply = <&reg_vcc3v3>;
159 vcc-pc-supply = <&reg_vcc3v3>;
160 vcc-pe-supply = <&reg_vcc3v3>;
161 vcc-pf-supply = <&reg_vcc3v3>;
162 vcc-pg-supply = <&reg_vcc3v3>;
163
164 gpio-line-names = "", "", "", "", // PA
165 "", "", "", "",
166 "", "", "", "",
167 "", "", "", "",
168 "", "", "", "",
169 "", "", "", "",
170 "", "", "", "",
171 "", "", "", "",
172 "CAN_nCS", "CAN_nINT", "USER_SW", "PB3", // PB
173 "USB_ID", "USBC_nINT", "I2C0_SCL", "I2C0_SDA",
174 "UART0_TX", "UART0_RX", "", "",
175 "", "", "", "",
176 "", "", "", "",
177 "", "", "", "",
178 "", "", "", "",
179 "", "", "", "",
180 "SPI_MISO", "SPI_SCK", "FLASH_nCS", "SPI_MOSI", // PC
181 "", "", "", "",
182 "", "", "", "",
183 "", "", "", "",
184 "", "", "", "",
185 "", "", "", "",
186 "", "", "", "",
187 "", "", "", "",
188 "", "", "", "", // PD
189 "", "", "", "",
190 "", "", "", "",
191 "", "", "", "",
192 "", "", "", "",
193 "", "", "", "",
194 "", "", "", "",
195 "", "", "", "",
196 "Q12", "Q11", "Q10", "Q9", // PE
197 "LED_SYS0", "I1", "Q1", "Q2",
198 "I2", "I3", "Q3", "Q4",
199 "I4", "I5", "Q5", "Q6",
200 "I6", "I7", "Q7", "Q8",
201 "I8", "UART1_TXD", "UART1_RXD", "ESP_nRST",
202 "ESP_nBOOT", "", "", "",
203 "", "", "", "",
204 "SD_D1", "SD_D0", "SD_CLK", "SD_CMD", // PF
205 "SD_D3", "SD_D2", "LED_SYS1", "",
206 "", "", "", "",
207 "", "", "", "",
208 "", "", "", "",
209 "", "", "", "",
210 "", "", "", "",
211 "", "", "", "",
212 "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
213 "ESP_D2", "ESP_D3", "", "",
214 "", "", "", "",
215 "", "", "", "",
216 "", "", "", "",
217 "", "", "", "",
218 "", "", "", "",
219 "", "", "", "";
220 };
221
222 /* Disable external 32k osc as it is broken on current revision */
223 &rtc {
224 /delete-property/ clocks;
225 };
226
227 /* Exposed as a USB-C connector with USB-Serial converter */
228 &uart0 {
229 pinctrl-0 = <&uart0_pb_pins>;
230 pinctrl-names = "default";
231 status = "okay";
232 };
233
234 /* Connected to the Bootloader/Console of the ESP32 */
235 &uart1 {
236 pinctrl-0 = <&uart1_pe_pins>;
237 pinctrl-names = "default";
238 status = "okay";
239 };
240
241 &usb_otg {
242 extcon = <&tusb320 0>;
243 dr_mode = "otg";
244 status = "okay";
245 };
246
247 &usbphy {
248 usb0_id_det-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
249 status = "okay";
250 };
251
252 &spi0 {
253 #address-cells = <1>;
254 #size-cells = <0>;
255 cs-gpios = <0>, <&pio 1 0 GPIO_ACTIVE_LOW>; /* PB0 */
256 status = "okay";
257
258 flash@0 {
259 compatible = "jedec,spi-nor";
260 reg = <0>;
261 #address-cells = <1>;
262 #size-cells = <1>;
263 label = "firmware";
264 spi-max-frequency = <40000000>;
265 };
266
267 can@1 {
268 compatible = "microchip,mcp2518fd";
269 reg = <1>;
270 clocks = <&clk_can0>;
271 interrupts-extended = <&pio 1 1 IRQ_TYPE_LEVEL_LOW>; /* PB1 */
272 spi-max-frequency = <20000000>;
273 vdd-supply = <&reg_vcc3v3>;
274 xceiver-supply = <&reg_vcc3v3>;
275 };
276 };