Debian Codegraph @

arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts

raw
1 /*
2 * Copyright 2014 Hans de Goede <[email protected]>
3 *
4 * Hans de Goede <[email protected]>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45 /dts-v1/;
46 #include "sun7i-a20.dtsi"
47 #include "sunxi-common-regulators.dtsi"
48
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
51 #include <dt-bindings/leds/common.h>
52
53 / {
54 model = "LeMaker Banana Pi";
55 compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
56
57 aliases {
58 serial0 = &uart0;
59 serial1 = &uart3;
60 serial2 = &uart7;
61 };
62
63 chosen {
64 stdout-path = "serial0:115200n8";
65 };
66
67 hdmi-connector {
68 compatible = "hdmi-connector";
69 type = "a";
70
71 port {
72 hdmi_con_in: endpoint {
73 remote-endpoint = <&hdmi_out_con>;
74 };
75 };
76 };
77
78 leds {
79 compatible = "gpio-leds";
80
81 led {
82 label = "bananapi:green:usr";
83 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
84 };
85 };
86
87 reg_gmac_3v3: gmac-3v3 {
88 compatible = "regulator-fixed";
89 regulator-name = "gmac-3v3";
90 regulator-min-microvolt = <3300000>;
91 regulator-max-microvolt = <3300000>;
92 startup-delay-us = <100000>;
93 enable-active-high;
94 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
95 };
96 };
97
98 &ahci {
99 status = "okay";
100 };
101
102 &codec {
103 status = "okay";
104 };
105
106 &cpu0 {
107 cpu-supply = <&reg_dcdc2>;
108 operating-points =
109 /* kHz uV */
110 <960000 1400000>,
111 <912000 1400000>,
112 <864000 1350000>,
113 <720000 1250000>,
114 <528000 1150000>,
115 <312000 1100000>,
116 <144000 1050000>;
117 };
118
119 &de {
120 status = "okay";
121 };
122
123 &ehci0 {
124 status = "okay";
125 };
126
127 &ehci1 {
128 status = "okay";
129 };
130
131 &gmac {
132 pinctrl-names = "default";
133 pinctrl-0 = <&gmac_rgmii_pins>;
134 phy-handle = <&phy1>;
135 phy-mode = "rgmii-id";
136 phy-supply = <&reg_gmac_3v3>;
137 status = "okay";
138 };
139
140 &hdmi {
141 status = "okay";
142 };
143
144 &hdmi_out {
145 hdmi_out_con: endpoint {
146 remote-endpoint = <&hdmi_con_in>;
147 };
148 };
149
150 &i2c0 {
151 status = "okay";
152
153 axp209: pmic@34 {
154 reg = <0x34>;
155 interrupt-parent = <&nmi_intc>;
156 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
157 };
158 };
159
160 &i2c2 {
161 status = "okay";
162 };
163
164 &ir0 {
165 pinctrl-names = "default";
166 pinctrl-0 = <&ir0_rx_pin>;
167 status = "okay";
168 };
169
170 &gmac_mdio {
171 phy1: ethernet-phy@1 {
172 reg = <1>;
173
174 leds {
175 #address-cells = <1>;
176 #size-cells = <0>;
177
178 led@0 {
179 reg = <0>;
180 color = <LED_COLOR_ID_GREEN>;
181 function = LED_FUNCTION_LAN;
182 linux,default-trigger = "netdev";
183 };
184
185 led@1 {
186 reg = <1>;
187 color = <LED_COLOR_ID_AMBER>;
188 function = LED_FUNCTION_LAN;
189 linux,default-trigger = "netdev";
190 };
191
192 led@2 {
193 reg = <2>;
194 color = <LED_COLOR_ID_BLUE>;
195 function = LED_FUNCTION_LAN;
196 linux,default-trigger = "netdev";
197 };
198 };
199 };
200 };
201
202 &mmc0 {
203 vmmc-supply = <&reg_vcc3v3>;
204 bus-width = <4>;
205 cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
206 status = "okay";
207 };
208
209 &ohci0 {
210 status = "okay";
211 };
212
213 &ohci1 {
214 status = "okay";
215 };
216
217 &otg_sram {
218 status = "okay";
219 };
220
221 &pio {
222 vcc-pa-supply = <&reg_vcc3v3>;
223 vcc-pc-supply = <&reg_vcc3v3>;
224 vcc-pe-supply = <&reg_vcc3v3>;
225 vcc-pf-supply = <&reg_vcc3v3>;
226 vcc-pg-supply = <&reg_vcc3v3>;
227 gpio-line-names =
228 /* PA */
229 "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
230 "ETXD2", "ETXD1", "ETXD0",
231 "ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO",
232 "ETXEN", "ETXCK", "ECRS",
233 "ECOL", "ETXERR", "", "", "", "", "", "",
234 "", "", "", "", "", "", "", "",
235 /* PB */
236 "PMU-SCK", "PMU-SDA", "", "", "", "", "", "",
237 "", "USB0-DRV", "", "", "", "", "", "",
238 "", "", "", "", "SCL", "SDA", "", "",
239 "", "", "", "", "", "", "", "",
240 /* PC */
241 "", "", "", "", "", "", "", "",
242 "", "", "", "", "", "", "", "",
243 "", "", "", "", "", "", "", "",
244 "", "", "", "", "", "", "", "",
245 /* PD */
246 "", "", "", "", "", "", "", "",
247 "", "", "", "", "", "", "", "",
248 "", "", "", "", "", "", "", "",
249 "", "", "", "", "", "", "", "",
250 /* PE */
251 "", "", "", "", "", "", "", "",
252 "", "", "", "", "", "", "", "",
253 "", "", "", "", "", "", "", "",
254 "", "", "", "", "", "", "", "",
255 /* PF */
256 "SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3",
257 "SD0-D2", "", "",
258 "", "", "", "", "", "", "", "",
259 "", "", "", "", "", "", "", "",
260 "", "", "", "", "", "", "", "",
261 /* PG */
262 "", "", "", "", "", "", "", "",
263 "", "", "", "", "", "", "", "",
264 "", "", "", "", "", "", "", "",
265 "", "", "", "", "", "", "", "",
266 /* PH */
267 "TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "",
268 "", "", "SD0-DET", "", "", "", "", "",
269 "", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN",
270 "LED1", "", "", "", "", "", "", "",
271 /* PI */
272 "", "", "", "IO-GCLK", "", "", "", "",
273 "", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI",
274 "SPI-MISO", "SPI-CE1", "",
275 "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
276 "", "", "", "", "", "", "", "";
277 };
278
279 #include "axp209.dtsi"
280
281 &reg_dcdc2 {
282 regulator-always-on;
283 regulator-min-microvolt = <1000000>;
284 regulator-max-microvolt = <1400000>;
285 regulator-name = "vdd-cpu";
286 };
287
288 &reg_dcdc3 {
289 regulator-always-on;
290 regulator-min-microvolt = <1000000>;
291 regulator-max-microvolt = <1400000>;
292 regulator-name = "vdd-int-dll";
293 };
294
295 &reg_ldo1 {
296 regulator-name = "vdd-rtc";
297 };
298
299 &reg_ldo2 {
300 regulator-always-on;
301 regulator-min-microvolt = <3000000>;
302 regulator-max-microvolt = <3000000>;
303 regulator-name = "avcc";
304 };
305
306 &reg_usb0_vbus {
307 status = "okay";
308 };
309
310 &reg_usb1_vbus {
311 status = "okay";
312 };
313
314 &reg_usb2_vbus {
315 status = "okay";
316 };
317
318 &spi0 {
319 pinctrl-names = "default";
320 pinctrl-0 = <&spi0_pi_pins>,
321 <&spi0_cs0_pi_pin>,
322 <&spi0_cs1_pi_pin>;
323 status = "okay";
324 };
325
326 &uart0 {
327 pinctrl-names = "default";
328 pinctrl-0 = <&uart0_pb_pins>;
329 status = "okay";
330 };
331
332 &uart3 {
333 pinctrl-names = "default";
334 pinctrl-0 = <&uart3_ph_pins>;
335 status = "okay";
336 };
337
338 &uart7 {
339 pinctrl-names = "default";
340 pinctrl-0 = <&uart7_pi_pins>;
341 status = "okay";
342 };
343
344 &usb_otg {
345 dr_mode = "otg";
346 status = "okay";
347 };
348
349 &usb_power_supply {
350 status = "okay";
351 };
352
353 &usbphy {
354 usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
355 usb0_vbus_power-supply = <&usb_power_supply>;
356 usb0_vbus-supply = <&reg_usb0_vbus>;
357 usb1_vbus-supply = <&reg_usb1_vbus>;
358 usb2_vbus-supply = <&reg_usb2_vbus>;
359 status = "okay";
360 };