| 1 |
/* |
| 2 |
* Copyright 2014 Chen-Yu Tsai |
| 3 |
* |
| 4 |
* Chen-Yu Tsai <[email protected]> |
| 5 |
* |
| 6 |
* This file is dual-licensed: you can use it either under the terms |
| 7 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 8 |
* licensing only applies to this file, and not this project as a |
| 9 |
* whole. |
| 10 |
* |
| 11 |
* a) This file is free software; you can redistribute it and/or |
| 12 |
* modify it under the terms of the GNU General Public License as |
| 13 |
* published by the Free Software Foundation; either version 2 of the |
| 14 |
* License, or (at your option) any later version. |
| 15 |
* |
| 16 |
* This file is distributed in the hope that it will be useful, |
| 17 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 |
* GNU General Public License for more details. |
| 20 |
* |
| 21 |
* Or, alternatively, |
| 22 |
* |
| 23 |
* b) Permission is hereby granted, free of charge, to any person |
| 24 |
* obtaining a copy of this software and associated documentation |
| 25 |
* files (the "Software"), to deal in the Software without |
| 26 |
* restriction, including without limitation the rights to use, |
| 27 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 28 |
* sell copies of the Software, and to permit persons to whom the |
| 29 |
* Software is furnished to do so, subject to the following |
| 30 |
* conditions: |
| 31 |
* |
| 32 |
* The above copyright notice and this permission notice shall be |
| 33 |
* included in all copies or substantial portions of the Software. |
| 34 |
* |
| 35 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 36 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 37 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 38 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 39 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 40 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 41 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 42 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 43 |
*/ |
| 44 |
|
| 45 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 46 |
|
| 47 |
#include <dt-bindings/clock/sun6i-rtc.h> |
| 48 |
#include <dt-bindings/clock/sun8i-a23-a33-ccu.h> |
| 49 |
#include <dt-bindings/reset/sun8i-a23-a33-ccu.h> |
| 50 |
|
| 51 |
/ { |
| 52 |
interrupt-parent = <&gic>; |
| 53 |
#address-cells = <1>; |
| 54 |
#size-cells = <1>; |
| 55 |
|
| 56 |
chosen { |
| 57 |
#address-cells = <1>; |
| 58 |
#size-cells = <1>; |
| 59 |
ranges; |
| 60 |
|
| 61 |
simplefb_lcd: framebuffer-lcd0 { |
| 62 |
compatible = "allwinner,simple-framebuffer", |
| 63 |
"simple-framebuffer"; |
| 64 |
allwinner,pipeline = "de_be0-lcd0"; |
| 65 |
clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>, |
| 66 |
<&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>, |
| 67 |
<&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>; |
| 68 |
status = "disabled"; |
| 69 |
}; |
| 70 |
}; |
| 71 |
|
| 72 |
de: display-engine { |
| 73 |
/* compatible gets set in SoC specific dtsi file */ |
| 74 |
allwinner,pipelines = <&fe0>; |
| 75 |
status = "disabled"; |
| 76 |
}; |
| 77 |
|
| 78 |
timer { |
| 79 |
compatible = "arm,armv7-timer"; |
| 80 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 81 |
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 82 |
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 83 |
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 84 |
clock-frequency = <24000000>; |
| 85 |
arm,cpu-registers-not-fw-configured; |
| 86 |
}; |
| 87 |
|
| 88 |
cpus { |
| 89 |
enable-method = "allwinner,sun8i-a23"; |
| 90 |
#address-cells = <1>; |
| 91 |
#size-cells = <0>; |
| 92 |
|
| 93 |
cpu0: cpu@0 { |
| 94 |
compatible = "arm,cortex-a7"; |
| 95 |
device_type = "cpu"; |
| 96 |
reg = <0>; |
| 97 |
}; |
| 98 |
|
| 99 |
cpu@1 { |
| 100 |
compatible = "arm,cortex-a7"; |
| 101 |
device_type = "cpu"; |
| 102 |
reg = <1>; |
| 103 |
}; |
| 104 |
}; |
| 105 |
|
| 106 |
clocks { |
| 107 |
#address-cells = <1>; |
| 108 |
#size-cells = <1>; |
| 109 |
ranges; |
| 110 |
|
| 111 |
osc24M: osc24M-clk { |
| 112 |
#clock-cells = <0>; |
| 113 |
compatible = "fixed-clock"; |
| 114 |
clock-frequency = <24000000>; |
| 115 |
clock-accuracy = <50000>; |
| 116 |
clock-output-names = "osc24M"; |
| 117 |
}; |
| 118 |
|
| 119 |
ext_osc32k: ext-osc32k-clk { |
| 120 |
#clock-cells = <0>; |
| 121 |
compatible = "fixed-clock"; |
| 122 |
clock-frequency = <32768>; |
| 123 |
clock-accuracy = <50000>; |
| 124 |
clock-output-names = "ext-osc32k"; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
soc { |
| 129 |
compatible = "simple-bus"; |
| 130 |
#address-cells = <1>; |
| 131 |
#size-cells = <1>; |
| 132 |
ranges; |
| 133 |
|
| 134 |
system-control@1c00000 { |
| 135 |
compatible = "allwinner,sun8i-a23-system-control"; |
| 136 |
reg = <0x01c00000 0x30>; |
| 137 |
#address-cells = <1>; |
| 138 |
#size-cells = <1>; |
| 139 |
ranges; |
| 140 |
|
| 141 |
sram_c: sram@1d00000 { |
| 142 |
compatible = "mmio-sram"; |
| 143 |
reg = <0x01d00000 0x80000>; |
| 144 |
#address-cells = <1>; |
| 145 |
#size-cells = <1>; |
| 146 |
ranges = <0 0x01d00000 0x80000>; |
| 147 |
|
| 148 |
ve_sram: sram-section@0 { |
| 149 |
compatible = "allwinner,sun8i-a23-sram-c1", |
| 150 |
"allwinner,sun4i-a10-sram-c1"; |
| 151 |
reg = <0x000000 0x80000>; |
| 152 |
}; |
| 153 |
}; |
| 154 |
}; |
| 155 |
|
| 156 |
dma: dma-controller@1c02000 { |
| 157 |
compatible = "allwinner,sun8i-a23-dma"; |
| 158 |
reg = <0x01c02000 0x1000>; |
| 159 |
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 160 |
clocks = <&ccu CLK_BUS_DMA>; |
| 161 |
resets = <&ccu RST_BUS_DMA>; |
| 162 |
#dma-cells = <1>; |
| 163 |
}; |
| 164 |
|
| 165 |
nfc: nand-controller@1c03000 { |
| 166 |
compatible = "allwinner,sun8i-a23-nand-controller"; |
| 167 |
reg = <0x01c03000 0x1000>; |
| 168 |
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| 169 |
clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; |
| 170 |
clock-names = "ahb", "mod"; |
| 171 |
resets = <&ccu RST_BUS_NAND>; |
| 172 |
reset-names = "ahb"; |
| 173 |
dmas = <&dma 5>; |
| 174 |
dma-names = "rxtx"; |
| 175 |
pinctrl-names = "default"; |
| 176 |
pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; |
| 177 |
status = "disabled"; |
| 178 |
#address-cells = <1>; |
| 179 |
#size-cells = <0>; |
| 180 |
}; |
| 181 |
|
| 182 |
tcon0: lcd-controller@1c0c000 { |
| 183 |
/* compatible gets set in SoC specific dtsi file */ |
| 184 |
reg = <0x01c0c000 0x1000>; |
| 185 |
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 186 |
dmas = <&dma 12>; |
| 187 |
clocks = <&ccu CLK_BUS_LCD>, |
| 188 |
<&ccu CLK_LCD_CH0>, |
| 189 |
<&ccu 13>; |
| 190 |
clock-names = "ahb", |
| 191 |
"tcon-ch0", |
| 192 |
"lvds-alt"; |
| 193 |
clock-output-names = "tcon-data-clock"; |
| 194 |
#clock-cells = <0>; |
| 195 |
resets = <&ccu RST_BUS_LCD>, |
| 196 |
<&ccu RST_BUS_LVDS>; |
| 197 |
reset-names = "lcd", |
| 198 |
"lvds"; |
| 199 |
status = "disabled"; |
| 200 |
|
| 201 |
ports { |
| 202 |
#address-cells = <1>; |
| 203 |
#size-cells = <0>; |
| 204 |
|
| 205 |
tcon0_in: port@0 { |
| 206 |
reg = <0>; |
| 207 |
|
| 208 |
tcon0_in_drc0: endpoint { |
| 209 |
remote-endpoint = <&drc0_out_tcon0>; |
| 210 |
}; |
| 211 |
}; |
| 212 |
|
| 213 |
tcon0_out: port@1 { |
| 214 |
reg = <1>; |
| 215 |
}; |
| 216 |
}; |
| 217 |
}; |
| 218 |
|
| 219 |
mmc0: mmc@1c0f000 { |
| 220 |
compatible = "allwinner,sun7i-a20-mmc"; |
| 221 |
reg = <0x01c0f000 0x1000>; |
| 222 |
clocks = <&ccu CLK_BUS_MMC0>, |
| 223 |
<&ccu CLK_MMC0>, |
| 224 |
<&ccu CLK_MMC0_OUTPUT>, |
| 225 |
<&ccu CLK_MMC0_SAMPLE>; |
| 226 |
clock-names = "ahb", |
| 227 |
"mmc", |
| 228 |
"output", |
| 229 |
"sample"; |
| 230 |
resets = <&ccu RST_BUS_MMC0>; |
| 231 |
reset-names = "ahb"; |
| 232 |
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| 233 |
pinctrl-names = "default"; |
| 234 |
pinctrl-0 = <&mmc0_pins>; |
| 235 |
status = "disabled"; |
| 236 |
#address-cells = <1>; |
| 237 |
#size-cells = <0>; |
| 238 |
}; |
| 239 |
|
| 240 |
mmc1: mmc@1c10000 { |
| 241 |
compatible = "allwinner,sun7i-a20-mmc"; |
| 242 |
reg = <0x01c10000 0x1000>; |
| 243 |
clocks = <&ccu CLK_BUS_MMC1>, |
| 244 |
<&ccu CLK_MMC1>, |
| 245 |
<&ccu CLK_MMC1_OUTPUT>, |
| 246 |
<&ccu CLK_MMC1_SAMPLE>; |
| 247 |
clock-names = "ahb", |
| 248 |
"mmc", |
| 249 |
"output", |
| 250 |
"sample"; |
| 251 |
resets = <&ccu RST_BUS_MMC1>; |
| 252 |
reset-names = "ahb"; |
| 253 |
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| 254 |
status = "disabled"; |
| 255 |
#address-cells = <1>; |
| 256 |
#size-cells = <0>; |
| 257 |
}; |
| 258 |
|
| 259 |
mmc2: mmc@1c11000 { |
| 260 |
compatible = "allwinner,sun7i-a20-mmc"; |
| 261 |
reg = <0x01c11000 0x1000>; |
| 262 |
clocks = <&ccu CLK_BUS_MMC2>, |
| 263 |
<&ccu CLK_MMC2>, |
| 264 |
<&ccu CLK_MMC2_OUTPUT>, |
| 265 |
<&ccu CLK_MMC2_SAMPLE>; |
| 266 |
clock-names = "ahb", |
| 267 |
"mmc", |
| 268 |
"output", |
| 269 |
"sample"; |
| 270 |
resets = <&ccu RST_BUS_MMC2>; |
| 271 |
reset-names = "ahb"; |
| 272 |
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| 273 |
status = "disabled"; |
| 274 |
#address-cells = <1>; |
| 275 |
#size-cells = <0>; |
| 276 |
}; |
| 277 |
|
| 278 |
usb_otg: usb@1c19000 { |
| 279 |
/* compatible gets set in SoC specific dtsi file */ |
| 280 |
reg = <0x01c19000 0x0400>; |
| 281 |
clocks = <&ccu CLK_BUS_OTG>; |
| 282 |
resets = <&ccu RST_BUS_OTG>; |
| 283 |
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 284 |
interrupt-names = "mc"; |
| 285 |
phys = <&usbphy 0>; |
| 286 |
phy-names = "usb"; |
| 287 |
extcon = <&usbphy 0>; |
| 288 |
dr_mode = "otg"; |
| 289 |
status = "disabled"; |
| 290 |
}; |
| 291 |
|
| 292 |
usbphy: phy@1c19400 { |
| 293 |
/* |
| 294 |
* compatible and address regions get set in |
| 295 |
* SoC specific dtsi file |
| 296 |
*/ |
| 297 |
clocks = <&ccu CLK_USB_PHY0>, |
| 298 |
<&ccu CLK_USB_PHY1>; |
| 299 |
clock-names = "usb0_phy", |
| 300 |
"usb1_phy"; |
| 301 |
resets = <&ccu RST_USB_PHY0>, |
| 302 |
<&ccu RST_USB_PHY1>; |
| 303 |
reset-names = "usb0_reset", |
| 304 |
"usb1_reset"; |
| 305 |
status = "disabled"; |
| 306 |
#phy-cells = <1>; |
| 307 |
}; |
| 308 |
|
| 309 |
ehci0: usb@1c1a000 { |
| 310 |
compatible = "allwinner,sun8i-a23-ehci", "generic-ehci"; |
| 311 |
reg = <0x01c1a000 0x100>; |
| 312 |
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| 313 |
clocks = <&ccu CLK_BUS_EHCI>; |
| 314 |
resets = <&ccu RST_BUS_EHCI>; |
| 315 |
phys = <&usbphy 1>; |
| 316 |
phy-names = "usb"; |
| 317 |
status = "disabled"; |
| 318 |
}; |
| 319 |
|
| 320 |
ohci0: usb@1c1a400 { |
| 321 |
compatible = "allwinner,sun8i-a23-ohci", "generic-ohci"; |
| 322 |
reg = <0x01c1a400 0x100>; |
| 323 |
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 324 |
clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>; |
| 325 |
resets = <&ccu RST_BUS_OHCI>; |
| 326 |
phys = <&usbphy 1>; |
| 327 |
phy-names = "usb"; |
| 328 |
status = "disabled"; |
| 329 |
}; |
| 330 |
|
| 331 |
ccu: clock@1c20000 { |
| 332 |
reg = <0x01c20000 0x400>; |
| 333 |
clocks = <&osc24M>, <&rtc CLK_OSC32K>; |
| 334 |
clock-names = "hosc", "losc"; |
| 335 |
#clock-cells = <1>; |
| 336 |
#reset-cells = <1>; |
| 337 |
}; |
| 338 |
|
| 339 |
pio: pinctrl@1c20800 { |
| 340 |
/* compatible gets set in SoC specific dtsi file */ |
| 341 |
reg = <0x01c20800 0x400>; |
| 342 |
interrupt-parent = <&r_intc>; |
| 343 |
/* interrupts get set in SoC specific dtsi file */ |
| 344 |
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, |
| 345 |
<&rtc CLK_OSC32K>; |
| 346 |
clock-names = "apb", "hosc", "losc"; |
| 347 |
gpio-controller; |
| 348 |
interrupt-controller; |
| 349 |
#interrupt-cells = <3>; |
| 350 |
#gpio-cells = <3>; |
| 351 |
|
| 352 |
i2c0_pins: i2c0-pins { |
| 353 |
pins = "PH2", "PH3"; |
| 354 |
function = "i2c0"; |
| 355 |
}; |
| 356 |
|
| 357 |
i2c1_pins: i2c1-pins { |
| 358 |
pins = "PH4", "PH5"; |
| 359 |
function = "i2c1"; |
| 360 |
}; |
| 361 |
|
| 362 |
i2c2_pins: i2c2-pins { |
| 363 |
pins = "PE12", "PE13"; |
| 364 |
function = "i2c2"; |
| 365 |
}; |
| 366 |
|
| 367 |
lcd_rgb666_pins: lcd-rgb666-pins { |
| 368 |
pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", |
| 369 |
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15", |
| 370 |
"PD18", "PD19", "PD20", "PD21", "PD22", "PD23", |
| 371 |
"PD24", "PD25", "PD26", "PD27"; |
| 372 |
function = "lcd0"; |
| 373 |
}; |
| 374 |
|
| 375 |
mmc0_pins: mmc0-pins { |
| 376 |
pins = "PF0", "PF1", "PF2", |
| 377 |
"PF3", "PF4", "PF5"; |
| 378 |
function = "mmc0"; |
| 379 |
drive-strength = <30>; |
| 380 |
bias-pull-up; |
| 381 |
}; |
| 382 |
|
| 383 |
mmc1_pg_pins: mmc1-pg-pins { |
| 384 |
pins = "PG0", "PG1", "PG2", |
| 385 |
"PG3", "PG4", "PG5"; |
| 386 |
function = "mmc1"; |
| 387 |
drive-strength = <30>; |
| 388 |
bias-pull-up; |
| 389 |
}; |
| 390 |
|
| 391 |
mmc2_8bit_pins: mmc2-8bit-pins { |
| 392 |
pins = "PC5", "PC6", "PC8", |
| 393 |
"PC9", "PC10", "PC11", |
| 394 |
"PC12", "PC13", "PC14", |
| 395 |
"PC15", "PC16"; |
| 396 |
function = "mmc2"; |
| 397 |
drive-strength = <30>; |
| 398 |
bias-pull-up; |
| 399 |
}; |
| 400 |
|
| 401 |
nand_pins: nand-pins { |
| 402 |
pins = "PC0", "PC1", "PC2", "PC5", |
| 403 |
"PC8", "PC9", "PC10", "PC11", |
| 404 |
"PC12", "PC13", "PC14", "PC15"; |
| 405 |
function = "nand0"; |
| 406 |
}; |
| 407 |
|
| 408 |
nand_cs0_pin: nand-cs0-pin { |
| 409 |
pins = "PC4"; |
| 410 |
function = "nand0"; |
| 411 |
bias-pull-up; |
| 412 |
}; |
| 413 |
|
| 414 |
nand_cs1_pin: nand-cs1-pin { |
| 415 |
pins = "PC3"; |
| 416 |
function = "nand0"; |
| 417 |
bias-pull-up; |
| 418 |
}; |
| 419 |
|
| 420 |
nand_rb0_pin: nand-rb0-pin { |
| 421 |
pins = "PC6"; |
| 422 |
function = "nand0"; |
| 423 |
bias-pull-up; |
| 424 |
}; |
| 425 |
|
| 426 |
nand_rb1_pin: nand-rb1-pin { |
| 427 |
pins = "PC7"; |
| 428 |
function = "nand0"; |
| 429 |
bias-pull-up; |
| 430 |
}; |
| 431 |
|
| 432 |
pwm0_pin: pwm0-pin { |
| 433 |
pins = "PH0"; |
| 434 |
function = "pwm0"; |
| 435 |
}; |
| 436 |
|
| 437 |
uart0_pf_pins: uart0-pf-pins { |
| 438 |
pins = "PF2", "PF4"; |
| 439 |
function = "uart0"; |
| 440 |
}; |
| 441 |
|
| 442 |
uart1_pg_pins: uart1-pg-pins { |
| 443 |
pins = "PG6", "PG7"; |
| 444 |
function = "uart1"; |
| 445 |
}; |
| 446 |
|
| 447 |
uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins { |
| 448 |
pins = "PG8", "PG9"; |
| 449 |
function = "uart1"; |
| 450 |
}; |
| 451 |
}; |
| 452 |
|
| 453 |
timer@1c20c00 { |
| 454 |
compatible = "allwinner,sun8i-a23-timer"; |
| 455 |
reg = <0x01c20c00 0xa0>; |
| 456 |
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| 457 |
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| 458 |
clocks = <&osc24M>; |
| 459 |
}; |
| 460 |
|
| 461 |
wdt0: watchdog@1c20ca0 { |
| 462 |
compatible = "allwinner,sun6i-a31-wdt"; |
| 463 |
reg = <0x01c20ca0 0x20>; |
| 464 |
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 465 |
clocks = <&osc24M>; |
| 466 |
}; |
| 467 |
|
| 468 |
pwm: pwm@1c21400 { |
| 469 |
compatible = "allwinner,sun7i-a20-pwm"; |
| 470 |
reg = <0x01c21400 0xc>; |
| 471 |
clocks = <&osc24M>; |
| 472 |
#pwm-cells = <3>; |
| 473 |
status = "disabled"; |
| 474 |
}; |
| 475 |
|
| 476 |
lradc: lradc@1c22800 { |
| 477 |
compatible = "allwinner,sun4i-a10-lradc-keys"; |
| 478 |
reg = <0x01c22800 0x100>; |
| 479 |
interrupt-parent = <&r_intc>; |
| 480 |
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| 481 |
status = "disabled"; |
| 482 |
}; |
| 483 |
|
| 484 |
uart0: serial@1c28000 { |
| 485 |
compatible = "snps,dw-apb-uart"; |
| 486 |
reg = <0x01c28000 0x400>; |
| 487 |
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| 488 |
reg-shift = <2>; |
| 489 |
reg-io-width = <4>; |
| 490 |
clocks = <&ccu CLK_BUS_UART0>; |
| 491 |
resets = <&ccu RST_BUS_UART0>; |
| 492 |
dmas = <&dma 6>, <&dma 6>; |
| 493 |
dma-names = "tx", "rx"; |
| 494 |
status = "disabled"; |
| 495 |
}; |
| 496 |
|
| 497 |
uart1: serial@1c28400 { |
| 498 |
compatible = "snps,dw-apb-uart"; |
| 499 |
reg = <0x01c28400 0x400>; |
| 500 |
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 501 |
reg-shift = <2>; |
| 502 |
reg-io-width = <4>; |
| 503 |
clocks = <&ccu CLK_BUS_UART1>; |
| 504 |
resets = <&ccu RST_BUS_UART1>; |
| 505 |
dmas = <&dma 7>, <&dma 7>; |
| 506 |
dma-names = "tx", "rx"; |
| 507 |
status = "disabled"; |
| 508 |
}; |
| 509 |
|
| 510 |
uart2: serial@1c28800 { |
| 511 |
compatible = "snps,dw-apb-uart"; |
| 512 |
reg = <0x01c28800 0x400>; |
| 513 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 514 |
reg-shift = <2>; |
| 515 |
reg-io-width = <4>; |
| 516 |
clocks = <&ccu CLK_BUS_UART2>; |
| 517 |
resets = <&ccu RST_BUS_UART2>; |
| 518 |
dmas = <&dma 8>, <&dma 8>; |
| 519 |
dma-names = "tx", "rx"; |
| 520 |
status = "disabled"; |
| 521 |
}; |
| 522 |
|
| 523 |
uart3: serial@1c28c00 { |
| 524 |
compatible = "snps,dw-apb-uart"; |
| 525 |
reg = <0x01c28c00 0x400>; |
| 526 |
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 527 |
reg-shift = <2>; |
| 528 |
reg-io-width = <4>; |
| 529 |
clocks = <&ccu CLK_BUS_UART3>; |
| 530 |
resets = <&ccu RST_BUS_UART3>; |
| 531 |
dmas = <&dma 9>, <&dma 9>; |
| 532 |
dma-names = "tx", "rx"; |
| 533 |
status = "disabled"; |
| 534 |
}; |
| 535 |
|
| 536 |
uart4: serial@1c29000 { |
| 537 |
compatible = "snps,dw-apb-uart"; |
| 538 |
reg = <0x01c29000 0x400>; |
| 539 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 540 |
reg-shift = <2>; |
| 541 |
reg-io-width = <4>; |
| 542 |
clocks = <&ccu CLK_BUS_UART4>; |
| 543 |
resets = <&ccu RST_BUS_UART4>; |
| 544 |
dmas = <&dma 10>, <&dma 10>; |
| 545 |
dma-names = "tx", "rx"; |
| 546 |
status = "disabled"; |
| 547 |
}; |
| 548 |
|
| 549 |
i2c0: i2c@1c2ac00 { |
| 550 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 551 |
reg = <0x01c2ac00 0x400>; |
| 552 |
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 553 |
clocks = <&ccu CLK_BUS_I2C0>; |
| 554 |
resets = <&ccu RST_BUS_I2C0>; |
| 555 |
pinctrl-names = "default"; |
| 556 |
pinctrl-0 = <&i2c0_pins>; |
| 557 |
status = "disabled"; |
| 558 |
#address-cells = <1>; |
| 559 |
#size-cells = <0>; |
| 560 |
}; |
| 561 |
|
| 562 |
i2c1: i2c@1c2b000 { |
| 563 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 564 |
reg = <0x01c2b000 0x400>; |
| 565 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 566 |
clocks = <&ccu CLK_BUS_I2C1>; |
| 567 |
resets = <&ccu RST_BUS_I2C1>; |
| 568 |
pinctrl-names = "default"; |
| 569 |
pinctrl-0 = <&i2c1_pins>; |
| 570 |
status = "disabled"; |
| 571 |
#address-cells = <1>; |
| 572 |
#size-cells = <0>; |
| 573 |
}; |
| 574 |
|
| 575 |
i2c2: i2c@1c2b400 { |
| 576 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 577 |
reg = <0x01c2b400 0x400>; |
| 578 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| 579 |
clocks = <&ccu CLK_BUS_I2C2>; |
| 580 |
resets = <&ccu RST_BUS_I2C2>; |
| 581 |
pinctrl-names = "default"; |
| 582 |
pinctrl-0 = <&i2c2_pins>; |
| 583 |
status = "disabled"; |
| 584 |
#address-cells = <1>; |
| 585 |
#size-cells = <0>; |
| 586 |
}; |
| 587 |
|
| 588 |
mali: gpu@1c40000 { |
| 589 |
compatible = "allwinner,sun8i-a23-mali", |
| 590 |
"allwinner,sun7i-a20-mali", "arm,mali-400"; |
| 591 |
reg = <0x01c40000 0x10000>; |
| 592 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| 593 |
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| 594 |
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| 595 |
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| 596 |
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| 597 |
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| 598 |
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| 599 |
interrupt-names = "gp", |
| 600 |
"gpmmu", |
| 601 |
"pp0", |
| 602 |
"ppmmu0", |
| 603 |
"pp1", |
| 604 |
"ppmmu1", |
| 605 |
"pmu"; |
| 606 |
clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; |
| 607 |
clock-names = "bus", "core"; |
| 608 |
resets = <&ccu RST_BUS_GPU>; |
| 609 |
#cooling-cells = <2>; |
| 610 |
|
| 611 |
assigned-clocks = <&ccu CLK_GPU>; |
| 612 |
assigned-clock-rates = <384000000>; |
| 613 |
}; |
| 614 |
|
| 615 |
gic: interrupt-controller@1c81000 { |
| 616 |
compatible = "arm,gic-400"; |
| 617 |
reg = <0x01c81000 0x1000>, |
| 618 |
<0x01c82000 0x2000>, |
| 619 |
<0x01c84000 0x2000>, |
| 620 |
<0x01c86000 0x2000>; |
| 621 |
interrupt-controller; |
| 622 |
#interrupt-cells = <3>; |
| 623 |
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 624 |
}; |
| 625 |
|
| 626 |
fe0: display-frontend@1e00000 { |
| 627 |
/* compatible gets set in SoC specific dtsi file */ |
| 628 |
reg = <0x01e00000 0x20000>; |
| 629 |
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| 630 |
clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>, |
| 631 |
<&ccu CLK_DRAM_DE_FE>; |
| 632 |
clock-names = "ahb", "mod", |
| 633 |
"ram"; |
| 634 |
resets = <&ccu RST_BUS_DE_FE>; |
| 635 |
|
| 636 |
ports { |
| 637 |
#address-cells = <1>; |
| 638 |
#size-cells = <0>; |
| 639 |
|
| 640 |
fe0_out: port@1 { |
| 641 |
reg = <1>; |
| 642 |
|
| 643 |
fe0_out_be0: endpoint { |
| 644 |
remote-endpoint = <&be0_in_fe0>; |
| 645 |
}; |
| 646 |
}; |
| 647 |
}; |
| 648 |
}; |
| 649 |
|
| 650 |
be0: display-backend@1e60000 { |
| 651 |
/* compatible gets set in SoC specific dtsi file */ |
| 652 |
reg = <0x01e60000 0x10000>; |
| 653 |
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 654 |
clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, |
| 655 |
<&ccu CLK_DRAM_DE_BE>; |
| 656 |
clock-names = "ahb", "mod", |
| 657 |
"ram"; |
| 658 |
resets = <&ccu RST_BUS_DE_BE>; |
| 659 |
|
| 660 |
ports { |
| 661 |
#address-cells = <1>; |
| 662 |
#size-cells = <0>; |
| 663 |
|
| 664 |
be0_in: port@0 { |
| 665 |
reg = <0>; |
| 666 |
|
| 667 |
be0_in_fe0: endpoint { |
| 668 |
remote-endpoint = <&fe0_out_be0>; |
| 669 |
}; |
| 670 |
}; |
| 671 |
|
| 672 |
be0_out: port@1 { |
| 673 |
reg = <1>; |
| 674 |
|
| 675 |
be0_out_drc0: endpoint { |
| 676 |
remote-endpoint = <&drc0_in_be0>; |
| 677 |
}; |
| 678 |
}; |
| 679 |
}; |
| 680 |
}; |
| 681 |
|
| 682 |
drc0: drc@1e70000 { |
| 683 |
/* compatible gets set in SoC specific dtsi file */ |
| 684 |
reg = <0x01e70000 0x10000>; |
| 685 |
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| 686 |
clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>, |
| 687 |
<&ccu CLK_DRAM_DRC>; |
| 688 |
clock-names = "ahb", "mod", "ram"; |
| 689 |
resets = <&ccu RST_BUS_DRC>; |
| 690 |
|
| 691 |
ports { |
| 692 |
#address-cells = <1>; |
| 693 |
#size-cells = <0>; |
| 694 |
|
| 695 |
drc0_in: port@0 { |
| 696 |
reg = <0>; |
| 697 |
|
| 698 |
drc0_in_be0: endpoint { |
| 699 |
remote-endpoint = <&be0_out_drc0>; |
| 700 |
}; |
| 701 |
}; |
| 702 |
|
| 703 |
drc0_out: port@1 { |
| 704 |
reg = <1>; |
| 705 |
|
| 706 |
drc0_out_tcon0: endpoint { |
| 707 |
remote-endpoint = <&tcon0_in_drc0>; |
| 708 |
}; |
| 709 |
}; |
| 710 |
}; |
| 711 |
}; |
| 712 |
|
| 713 |
rtc: rtc@1f00000 { |
| 714 |
compatible = "allwinner,sun8i-a23-rtc"; |
| 715 |
reg = <0x01f00000 0x400>; |
| 716 |
interrupt-parent = <&r_intc>; |
| 717 |
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, |
| 718 |
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 719 |
clock-output-names = "osc32k", "osc32k-out"; |
| 720 |
clocks = <&ext_osc32k>; |
| 721 |
#clock-cells = <1>; |
| 722 |
}; |
| 723 |
|
| 724 |
r_intc: interrupt-controller@1f00c00 { |
| 725 |
compatible = "allwinner,sun6i-a31-r-intc"; |
| 726 |
interrupt-controller; |
| 727 |
#interrupt-cells = <3>; |
| 728 |
reg = <0x01f00c00 0x400>; |
| 729 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 730 |
}; |
| 731 |
|
| 732 |
prcm@1f01400 { |
| 733 |
compatible = "allwinner,sun8i-a23-prcm"; |
| 734 |
reg = <0x01f01400 0x200>; |
| 735 |
|
| 736 |
ar100: ar100-clk { |
| 737 |
compatible = "fixed-factor-clock"; |
| 738 |
#clock-cells = <0>; |
| 739 |
clock-div = <1>; |
| 740 |
clock-mult = <1>; |
| 741 |
clocks = <&osc24M>; |
| 742 |
clock-output-names = "ar100"; |
| 743 |
}; |
| 744 |
|
| 745 |
ahb0: ahb0-clk { |
| 746 |
compatible = "fixed-factor-clock"; |
| 747 |
#clock-cells = <0>; |
| 748 |
clock-div = <1>; |
| 749 |
clock-mult = <1>; |
| 750 |
clocks = <&ar100>; |
| 751 |
clock-output-names = "ahb0"; |
| 752 |
}; |
| 753 |
|
| 754 |
apb0: apb0-clk { |
| 755 |
compatible = "allwinner,sun8i-a23-apb0-clk"; |
| 756 |
#clock-cells = <0>; |
| 757 |
clocks = <&ahb0>; |
| 758 |
clock-output-names = "apb0"; |
| 759 |
}; |
| 760 |
|
| 761 |
apb0_gates: apb0-gates-clk { |
| 762 |
compatible = "allwinner,sun8i-a23-apb0-gates-clk"; |
| 763 |
#clock-cells = <1>; |
| 764 |
clocks = <&apb0>; |
| 765 |
clock-output-names = "apb0_pio", "apb0_timer", |
| 766 |
"apb0_rsb", "apb0_uart", |
| 767 |
"apb0_i2c"; |
| 768 |
}; |
| 769 |
|
| 770 |
apb0_rst: apb0-rst { |
| 771 |
compatible = "allwinner,sun6i-a31-clock-reset"; |
| 772 |
#reset-cells = <1>; |
| 773 |
}; |
| 774 |
|
| 775 |
codec_analog: codec-analog { |
| 776 |
compatible = "allwinner,sun8i-a23-codec-analog"; |
| 777 |
}; |
| 778 |
}; |
| 779 |
|
| 780 |
cpucfg@1f01c00 { |
| 781 |
compatible = "allwinner,sun8i-a23-cpuconfig"; |
| 782 |
reg = <0x01f01c00 0x300>; |
| 783 |
}; |
| 784 |
|
| 785 |
r_uart: serial@1f02800 { |
| 786 |
compatible = "snps,dw-apb-uart"; |
| 787 |
reg = <0x01f02800 0x400>; |
| 788 |
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 789 |
reg-shift = <2>; |
| 790 |
reg-io-width = <4>; |
| 791 |
clocks = <&apb0_gates 4>; |
| 792 |
resets = <&apb0_rst 4>; |
| 793 |
status = "disabled"; |
| 794 |
}; |
| 795 |
|
| 796 |
r_i2c: i2c@1f02400 { |
| 797 |
compatible = "allwinner,sun8i-a23-i2c", |
| 798 |
"allwinner,sun6i-a31-i2c"; |
| 799 |
reg = <0x01f02400 0x400>; |
| 800 |
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| 801 |
pinctrl-names = "default"; |
| 802 |
pinctrl-0 = <&r_i2c_pins>; |
| 803 |
clocks = <&apb0_gates 6>; |
| 804 |
resets = <&apb0_rst 6>; |
| 805 |
status = "disabled"; |
| 806 |
#address-cells = <1>; |
| 807 |
#size-cells = <0>; |
| 808 |
}; |
| 809 |
|
| 810 |
r_pio: pinctrl@1f02c00 { |
| 811 |
compatible = "allwinner,sun8i-a23-r-pinctrl"; |
| 812 |
reg = <0x01f02c00 0x400>; |
| 813 |
interrupt-parent = <&r_intc>; |
| 814 |
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| 815 |
clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>; |
| 816 |
clock-names = "apb", "hosc", "losc"; |
| 817 |
gpio-controller; |
| 818 |
interrupt-controller; |
| 819 |
#interrupt-cells = <3>; |
| 820 |
#gpio-cells = <3>; |
| 821 |
|
| 822 |
r_i2c_pins: r-i2c-pins { |
| 823 |
pins = "PL0", "PL1"; |
| 824 |
function = "s_i2c"; |
| 825 |
bias-pull-up; |
| 826 |
}; |
| 827 |
|
| 828 |
r_rsb_pins: r-rsb-pins { |
| 829 |
pins = "PL0", "PL1"; |
| 830 |
function = "s_rsb"; |
| 831 |
drive-strength = <20>; |
| 832 |
bias-pull-up; |
| 833 |
}; |
| 834 |
|
| 835 |
r_uart_pins_a: r-uart-pins { |
| 836 |
pins = "PL2", "PL3"; |
| 837 |
function = "s_uart"; |
| 838 |
}; |
| 839 |
}; |
| 840 |
|
| 841 |
r_rsb: rsb@1f03400 { |
| 842 |
compatible = "allwinner,sun8i-a23-rsb"; |
| 843 |
reg = <0x01f03400 0x400>; |
| 844 |
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 845 |
clocks = <&apb0_gates 3>; |
| 846 |
clock-frequency = <3000000>; |
| 847 |
resets = <&apb0_rst 3>; |
| 848 |
pinctrl-names = "default"; |
| 849 |
pinctrl-0 = <&r_rsb_pins>; |
| 850 |
status = "disabled"; |
| 851 |
#address-cells = <1>; |
| 852 |
#size-cells = <0>; |
| 853 |
}; |
| 854 |
}; |
| 855 |
}; |