| 1 |
/* |
| 2 |
* Copyright 2014 Chen-Yu Tsai |
| 3 |
* |
| 4 |
* Chen-Yu Tsai <[email protected]> |
| 5 |
* |
| 6 |
* This file is dual-licensed: you can use it either under the terms |
| 7 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 8 |
* licensing only applies to this file, and not this project as a |
| 9 |
* whole. |
| 10 |
* |
| 11 |
* a) This file is free software; you can redistribute it and/or |
| 12 |
* modify it under the terms of the GNU General Public License as |
| 13 |
* published by the Free Software Foundation; either version 2 of the |
| 14 |
* License, or (at your option) any later version. |
| 15 |
* |
| 16 |
* This file is distributed in the hope that it will be useful, |
| 17 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 |
* GNU General Public License for more details. |
| 20 |
* |
| 21 |
* Or, alternatively, |
| 22 |
* |
| 23 |
* b) Permission is hereby granted, free of charge, to any person |
| 24 |
* obtaining a copy of this software and associated documentation |
| 25 |
* files (the "Software"), to deal in the Software without |
| 26 |
* restriction, including without limitation the rights to use, |
| 27 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 28 |
* sell copies of the Software, and to permit persons to whom the |
| 29 |
* Software is furnished to do so, subject to the following |
| 30 |
* conditions: |
| 31 |
* |
| 32 |
* The above copyright notice and this permission notice shall be |
| 33 |
* included in all copies or substantial portions of the Software. |
| 34 |
* |
| 35 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 36 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 37 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 38 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 39 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 40 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 41 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 42 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 43 |
*/ |
| 44 |
|
| 45 |
#include "sun8i-a23-a33.dtsi" |
| 46 |
#include <dt-bindings/thermal/thermal.h> |
| 47 |
|
| 48 |
/ { |
| 49 |
cpu0_opp_table: opp-table-cpu { |
| 50 |
compatible = "operating-points-v2"; |
| 51 |
opp-shared; |
| 52 |
|
| 53 |
opp-120000000 { |
| 54 |
opp-hz = /bits/ 64 <120000000>; |
| 55 |
opp-microvolt = <1040000>; |
| 56 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 57 |
}; |
| 58 |
|
| 59 |
opp-240000000 { |
| 60 |
opp-hz = /bits/ 64 <240000000>; |
| 61 |
opp-microvolt = <1040000>; |
| 62 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 63 |
}; |
| 64 |
|
| 65 |
opp-312000000 { |
| 66 |
opp-hz = /bits/ 64 <312000000>; |
| 67 |
opp-microvolt = <1040000>; |
| 68 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 69 |
}; |
| 70 |
|
| 71 |
opp-408000000 { |
| 72 |
opp-hz = /bits/ 64 <408000000>; |
| 73 |
opp-microvolt = <1040000>; |
| 74 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 75 |
}; |
| 76 |
|
| 77 |
opp-480000000 { |
| 78 |
opp-hz = /bits/ 64 <480000000>; |
| 79 |
opp-microvolt = <1040000>; |
| 80 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 81 |
}; |
| 82 |
|
| 83 |
opp-504000000 { |
| 84 |
opp-hz = /bits/ 64 <504000000>; |
| 85 |
opp-microvolt = <1040000>; |
| 86 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 87 |
}; |
| 88 |
|
| 89 |
opp-600000000 { |
| 90 |
opp-hz = /bits/ 64 <600000000>; |
| 91 |
opp-microvolt = <1040000>; |
| 92 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 93 |
}; |
| 94 |
|
| 95 |
opp-648000000 { |
| 96 |
opp-hz = /bits/ 64 <648000000>; |
| 97 |
opp-microvolt = <1040000>; |
| 98 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 99 |
}; |
| 100 |
|
| 101 |
opp-720000000 { |
| 102 |
opp-hz = /bits/ 64 <720000000>; |
| 103 |
opp-microvolt = <1100000>; |
| 104 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 105 |
}; |
| 106 |
|
| 107 |
opp-816000000 { |
| 108 |
opp-hz = /bits/ 64 <816000000>; |
| 109 |
opp-microvolt = <1100000>; |
| 110 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 111 |
}; |
| 112 |
|
| 113 |
opp-912000000 { |
| 114 |
opp-hz = /bits/ 64 <912000000>; |
| 115 |
opp-microvolt = <1200000>; |
| 116 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 117 |
}; |
| 118 |
|
| 119 |
opp-1008000000 { |
| 120 |
opp-hz = /bits/ 64 <1008000000>; |
| 121 |
opp-microvolt = <1200000>; |
| 122 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
cpus { |
| 127 |
cpu@0 { |
| 128 |
clocks = <&ccu CLK_CPUX>; |
| 129 |
clock-names = "cpu"; |
| 130 |
operating-points-v2 = <&cpu0_opp_table>; |
| 131 |
#cooling-cells = <2>; |
| 132 |
}; |
| 133 |
|
| 134 |
cpu1: cpu@1 { |
| 135 |
clocks = <&ccu CLK_CPUX>; |
| 136 |
clock-names = "cpu"; |
| 137 |
operating-points-v2 = <&cpu0_opp_table>; |
| 138 |
#cooling-cells = <2>; |
| 139 |
}; |
| 140 |
|
| 141 |
cpu2: cpu@2 { |
| 142 |
compatible = "arm,cortex-a7"; |
| 143 |
device_type = "cpu"; |
| 144 |
reg = <2>; |
| 145 |
clocks = <&ccu CLK_CPUX>; |
| 146 |
clock-names = "cpu"; |
| 147 |
operating-points-v2 = <&cpu0_opp_table>; |
| 148 |
#cooling-cells = <2>; |
| 149 |
}; |
| 150 |
|
| 151 |
cpu3: cpu@3 { |
| 152 |
compatible = "arm,cortex-a7"; |
| 153 |
device_type = "cpu"; |
| 154 |
reg = <3>; |
| 155 |
clocks = <&ccu CLK_CPUX>; |
| 156 |
clock-names = "cpu"; |
| 157 |
operating-points-v2 = <&cpu0_opp_table>; |
| 158 |
#cooling-cells = <2>; |
| 159 |
}; |
| 160 |
}; |
| 161 |
|
| 162 |
iio-hwmon { |
| 163 |
compatible = "iio-hwmon"; |
| 164 |
io-channels = <&ths>; |
| 165 |
}; |
| 166 |
|
| 167 |
mali_opp_table: opp-table-gpu { |
| 168 |
compatible = "operating-points-v2"; |
| 169 |
|
| 170 |
opp-144000000 { |
| 171 |
opp-hz = /bits/ 64 <144000000>; |
| 172 |
}; |
| 173 |
|
| 174 |
opp-240000000 { |
| 175 |
opp-hz = /bits/ 64 <240000000>; |
| 176 |
}; |
| 177 |
|
| 178 |
opp-384000000 { |
| 179 |
opp-hz = /bits/ 64 <384000000>; |
| 180 |
}; |
| 181 |
}; |
| 182 |
|
| 183 |
sound: sound { |
| 184 |
compatible = "simple-audio-card"; |
| 185 |
simple-audio-card,name = "sun8i-a33-audio"; |
| 186 |
simple-audio-card,format = "i2s"; |
| 187 |
simple-audio-card,frame-master = <&link_codec>; |
| 188 |
simple-audio-card,bitclock-master = <&link_codec>; |
| 189 |
simple-audio-card,mclk-fs = <128>; |
| 190 |
simple-audio-card,aux-devs = <&codec_analog>; |
| 191 |
simple-audio-card,routing = |
| 192 |
"Left DAC", "DACL", |
| 193 |
"Right DAC", "DACR"; |
| 194 |
status = "disabled"; |
| 195 |
|
| 196 |
simple-audio-card,cpu { |
| 197 |
sound-dai = <&dai>; |
| 198 |
}; |
| 199 |
|
| 200 |
link_codec: simple-audio-card,codec { |
| 201 |
sound-dai = <&codec 0>; |
| 202 |
}; |
| 203 |
}; |
| 204 |
|
| 205 |
soc { |
| 206 |
video-codec@1c0e000 { |
| 207 |
compatible = "allwinner,sun8i-a33-video-engine"; |
| 208 |
reg = <0x01c0e000 0x1000>; |
| 209 |
clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, |
| 210 |
<&ccu CLK_DRAM_VE>; |
| 211 |
clock-names = "ahb", "mod", "ram"; |
| 212 |
resets = <&ccu RST_BUS_VE>; |
| 213 |
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| 214 |
allwinner,sram = <&ve_sram 1>; |
| 215 |
}; |
| 216 |
|
| 217 |
crypto: crypto-engine@1c15000 { |
| 218 |
compatible = "allwinner,sun8i-a33-crypto"; |
| 219 |
reg = <0x01c15000 0x1000>; |
| 220 |
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| 221 |
clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; |
| 222 |
clock-names = "ahb", "mod"; |
| 223 |
resets = <&ccu RST_BUS_SS>; |
| 224 |
reset-names = "ahb"; |
| 225 |
}; |
| 226 |
|
| 227 |
dai: dai@1c22c00 { |
| 228 |
#sound-dai-cells = <0>; |
| 229 |
compatible = "allwinner,sun6i-a31-i2s"; |
| 230 |
reg = <0x01c22c00 0x200>; |
| 231 |
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 232 |
clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; |
| 233 |
clock-names = "apb", "mod"; |
| 234 |
resets = <&ccu RST_BUS_CODEC>; |
| 235 |
dmas = <&dma 15>, <&dma 15>; |
| 236 |
dma-names = "rx", "tx"; |
| 237 |
status = "disabled"; |
| 238 |
}; |
| 239 |
|
| 240 |
codec: codec@1c22e00 { |
| 241 |
#sound-dai-cells = <1>; |
| 242 |
compatible = "allwinner,sun8i-a33-codec"; |
| 243 |
reg = <0x01c22e00 0x400>; |
| 244 |
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 245 |
clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; |
| 246 |
clock-names = "bus", "mod"; |
| 247 |
status = "disabled"; |
| 248 |
}; |
| 249 |
|
| 250 |
ths: ths@1c25000 { |
| 251 |
compatible = "allwinner,sun8i-a33-ths"; |
| 252 |
reg = <0x01c25000 0x100>; |
| 253 |
#thermal-sensor-cells = <0>; |
| 254 |
#io-channel-cells = <0>; |
| 255 |
}; |
| 256 |
|
| 257 |
dsi: dsi@1ca0000 { |
| 258 |
compatible = "allwinner,sun6i-a31-mipi-dsi"; |
| 259 |
reg = <0x01ca0000 0x1000>; |
| 260 |
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| 261 |
clocks = <&ccu CLK_BUS_MIPI_DSI>, |
| 262 |
<&ccu CLK_DSI_SCLK>; |
| 263 |
clock-names = "bus", "mod"; |
| 264 |
resets = <&ccu RST_BUS_MIPI_DSI>; |
| 265 |
phys = <&dphy>; |
| 266 |
phy-names = "dphy"; |
| 267 |
status = "disabled"; |
| 268 |
#address-cells = <1>; |
| 269 |
#size-cells = <0>; |
| 270 |
|
| 271 |
port { |
| 272 |
dsi_in_tcon0: endpoint { |
| 273 |
remote-endpoint = <&tcon0_out_dsi>; |
| 274 |
}; |
| 275 |
}; |
| 276 |
}; |
| 277 |
|
| 278 |
dphy: d-phy@1ca1000 { |
| 279 |
compatible = "allwinner,sun6i-a31-mipi-dphy"; |
| 280 |
reg = <0x01ca1000 0x1000>; |
| 281 |
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| 282 |
clocks = <&ccu CLK_BUS_MIPI_DSI>, |
| 283 |
<&ccu CLK_DSI_DPHY>; |
| 284 |
clock-names = "bus", "mod"; |
| 285 |
resets = <&ccu RST_BUS_MIPI_DSI>; |
| 286 |
status = "disabled"; |
| 287 |
#phy-cells = <0>; |
| 288 |
}; |
| 289 |
}; |
| 290 |
|
| 291 |
thermal-zones { |
| 292 |
cpu-thermal { |
| 293 |
/* milliseconds */ |
| 294 |
polling-delay-passive = <250>; |
| 295 |
polling-delay = <1000>; |
| 296 |
thermal-sensors = <&ths>; |
| 297 |
|
| 298 |
cooling-maps { |
| 299 |
map0 { |
| 300 |
trip = <&cpu_alert0>; |
| 301 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 302 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 303 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 304 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 305 |
}; |
| 306 |
map1 { |
| 307 |
trip = <&cpu_alert1>; |
| 308 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 309 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 310 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 311 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 312 |
}; |
| 313 |
|
| 314 |
map2 { |
| 315 |
trip = <&gpu_alert0>; |
| 316 |
cooling-device = <&mali 1 THERMAL_NO_LIMIT>; |
| 317 |
}; |
| 318 |
|
| 319 |
map3 { |
| 320 |
trip = <&gpu_alert1>; |
| 321 |
cooling-device = <&mali 2 THERMAL_NO_LIMIT>; |
| 322 |
}; |
| 323 |
}; |
| 324 |
|
| 325 |
trips { |
| 326 |
cpu_alert0: cpu-alert0 { |
| 327 |
/* milliCelsius */ |
| 328 |
temperature = <75000>; |
| 329 |
hysteresis = <2000>; |
| 330 |
type = "passive"; |
| 331 |
}; |
| 332 |
|
| 333 |
gpu_alert0: gpu-alert0 { |
| 334 |
/* milliCelsius */ |
| 335 |
temperature = <85000>; |
| 336 |
hysteresis = <2000>; |
| 337 |
type = "passive"; |
| 338 |
}; |
| 339 |
|
| 340 |
cpu_alert1: cpu-alert1 { |
| 341 |
/* milliCelsius */ |
| 342 |
temperature = <90000>; |
| 343 |
hysteresis = <2000>; |
| 344 |
type = "hot"; |
| 345 |
}; |
| 346 |
|
| 347 |
gpu_alert1: gpu-alert1 { |
| 348 |
/* milliCelsius */ |
| 349 |
temperature = <95000>; |
| 350 |
hysteresis = <2000>; |
| 351 |
type = "hot"; |
| 352 |
}; |
| 353 |
|
| 354 |
cpu_crit: cpu-crit { |
| 355 |
/* milliCelsius */ |
| 356 |
temperature = <110000>; |
| 357 |
hysteresis = <2000>; |
| 358 |
type = "critical"; |
| 359 |
}; |
| 360 |
}; |
| 361 |
}; |
| 362 |
}; |
| 363 |
}; |
| 364 |
|
| 365 |
&be0 { |
| 366 |
compatible = "allwinner,sun8i-a33-display-backend"; |
| 367 |
/* A33 has an extra "SAT" module packed inside the display backend */ |
| 368 |
reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; |
| 369 |
reg-names = "be", "sat"; |
| 370 |
clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, |
| 371 |
<&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; |
| 372 |
clock-names = "ahb", "mod", |
| 373 |
"ram", "sat"; |
| 374 |
resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; |
| 375 |
reset-names = "be", "sat"; |
| 376 |
}; |
| 377 |
|
| 378 |
&ccu { |
| 379 |
compatible = "allwinner,sun8i-a33-ccu"; |
| 380 |
}; |
| 381 |
|
| 382 |
&de { |
| 383 |
compatible = "allwinner,sun8i-a33-display-engine"; |
| 384 |
}; |
| 385 |
|
| 386 |
&drc0 { |
| 387 |
compatible = "allwinner,sun8i-a33-drc"; |
| 388 |
}; |
| 389 |
|
| 390 |
&fe0 { |
| 391 |
compatible = "allwinner,sun8i-a33-display-frontend"; |
| 392 |
}; |
| 393 |
|
| 394 |
&mali { |
| 395 |
operating-points-v2 = <&mali_opp_table>; |
| 396 |
}; |
| 397 |
|
| 398 |
&pio { |
| 399 |
compatible = "allwinner,sun8i-a33-pinctrl"; |
| 400 |
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, |
| 401 |
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| 402 |
|
| 403 |
uart0_pb_pins: uart0-pb-pins { |
| 404 |
pins = "PB0", "PB1"; |
| 405 |
function = "uart0"; |
| 406 |
}; |
| 407 |
|
| 408 |
}; |
| 409 |
|
| 410 |
&tcon0 { |
| 411 |
compatible = "allwinner,sun8i-a33-tcon"; |
| 412 |
}; |
| 413 |
|
| 414 |
&tcon0_out { |
| 415 |
#address-cells = <1>; |
| 416 |
#size-cells = <0>; |
| 417 |
|
| 418 |
tcon0_out_dsi: endpoint@1 { |
| 419 |
reg = <1>; |
| 420 |
remote-endpoint = <&dsi_in_tcon0>; |
| 421 |
}; |
| 422 |
}; |
| 423 |
|
| 424 |
&usb_otg { |
| 425 |
compatible = "allwinner,sun8i-a33-musb"; |
| 426 |
}; |
| 427 |
|
| 428 |
&usbphy { |
| 429 |
compatible = "allwinner,sun8i-a33-usb-phy"; |
| 430 |
reg = <0x01c19400 0x14>, <0x01c1a800 0x4>; |
| 431 |
reg-names = "phy_ctrl", "pmu1"; |
| 432 |
}; |