| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR X11) |
| 2 |
/* |
| 3 |
* Copyright 2020 Paul Kocialkowski <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "sun8i-v3.dtsi" |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/input/input.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "SL631 Action Camera"; |
| 15 |
compatible = "allwinner,sl631", "allwinner,sun8i-v3"; |
| 16 |
|
| 17 |
aliases { |
| 18 |
serial0 = &uart1; |
| 19 |
}; |
| 20 |
|
| 21 |
chosen { |
| 22 |
stdout-path = "serial0:115200n8"; |
| 23 |
}; |
| 24 |
}; |
| 25 |
|
| 26 |
&i2c0 { |
| 27 |
status = "okay"; |
| 28 |
|
| 29 |
axp209: pmic@34 { |
| 30 |
reg = <0x34>; |
| 31 |
interrupt-parent = <&nmi_intc>; |
| 32 |
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 33 |
}; |
| 34 |
}; |
| 35 |
|
| 36 |
&i2c1 { |
| 37 |
pinctrl-names = "default"; |
| 38 |
pinctrl-0 = <&i2c1_pb_pins>; |
| 39 |
status = "okay"; |
| 40 |
}; |
| 41 |
|
| 42 |
&lradc { |
| 43 |
vref-supply = <®_ldo2>; |
| 44 |
status = "okay"; |
| 45 |
|
| 46 |
button-174 { |
| 47 |
label = "Down"; |
| 48 |
linux,code = <KEY_DOWN>; |
| 49 |
channel = <0>; |
| 50 |
voltage = <174603>; |
| 51 |
}; |
| 52 |
|
| 53 |
button-384 { |
| 54 |
label = "Up"; |
| 55 |
linux,code = <KEY_UP>; |
| 56 |
channel = <0>; |
| 57 |
voltage = <384126>; |
| 58 |
}; |
| 59 |
|
| 60 |
button-593 { |
| 61 |
label = "OK"; |
| 62 |
linux,code = <KEY_OK>; |
| 63 |
channel = <0>; |
| 64 |
voltage = <593650>; |
| 65 |
}; |
| 66 |
}; |
| 67 |
|
| 68 |
&mmc0 { |
| 69 |
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
| 70 |
bus-width = <4>; |
| 71 |
vmmc-supply = <®_dcdc3>; |
| 72 |
status = "okay"; |
| 73 |
}; |
| 74 |
|
| 75 |
&pio { |
| 76 |
vcc-pd-supply = <®_dcdc3>; |
| 77 |
vcc-pe-supply = <®_dcdc3>; |
| 78 |
}; |
| 79 |
|
| 80 |
#include "axp209.dtsi" |
| 81 |
|
| 82 |
&ac_power_supply { |
| 83 |
status = "okay"; |
| 84 |
}; |
| 85 |
|
| 86 |
&battery_power_supply { |
| 87 |
status = "okay"; |
| 88 |
}; |
| 89 |
|
| 90 |
®_dcdc2 { |
| 91 |
regulator-always-on; |
| 92 |
regulator-min-microvolt = <1250000>; |
| 93 |
regulator-max-microvolt = <1250000>; |
| 94 |
regulator-name = "vdd-sys-cpu"; |
| 95 |
}; |
| 96 |
|
| 97 |
®_dcdc3 { |
| 98 |
regulator-always-on; |
| 99 |
regulator-min-microvolt = <3300000>; |
| 100 |
regulator-max-microvolt = <3300000>; |
| 101 |
regulator-name = "vdd-3v3"; |
| 102 |
}; |
| 103 |
|
| 104 |
®_ldo1 { |
| 105 |
regulator-name = "vdd-rtc"; |
| 106 |
}; |
| 107 |
|
| 108 |
®_ldo2 { |
| 109 |
regulator-always-on; |
| 110 |
regulator-min-microvolt = <3000000>; |
| 111 |
regulator-max-microvolt = <3000000>; |
| 112 |
regulator-name = "avcc"; |
| 113 |
}; |
| 114 |
|
| 115 |
&spi0 { |
| 116 |
status = "okay"; |
| 117 |
|
| 118 |
flash@0 { |
| 119 |
reg = <0>; |
| 120 |
compatible = "jedec,spi-nor"; |
| 121 |
spi-max-frequency = <50000000>; |
| 122 |
}; |
| 123 |
}; |
| 124 |
|
| 125 |
&uart1 { |
| 126 |
pinctrl-0 = <&uart1_pg_pins>; |
| 127 |
pinctrl-names = "default"; |
| 128 |
status = "okay"; |
| 129 |
}; |
| 130 |
|
| 131 |
&usb_otg { |
| 132 |
dr_mode = "peripheral"; |
| 133 |
status = "okay"; |
| 134 |
}; |
| 135 |
|
| 136 |
&usbphy { |
| 137 |
status = "okay"; |
| 138 |
}; |