| 1 |
/* |
| 2 |
* Copyright 2014 Chen-Yu Tsai |
| 3 |
* |
| 4 |
* Chen-Yu Tsai <[email protected]> |
| 5 |
* |
| 6 |
* This file is dual-licensed: you can use it either under the terms |
| 7 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 8 |
* licensing only applies to this file, and not this project as a |
| 9 |
* whole. |
| 10 |
* |
| 11 |
* a) This file is free software; you can redistribute it and/or |
| 12 |
* modify it under the terms of the GNU General Public License as |
| 13 |
* published by the Free Software Foundation; either version 2 of the |
| 14 |
* License, or (at your option) any later version. |
| 15 |
* |
| 16 |
* This file is distributed in the hope that it will be useful, |
| 17 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 |
* GNU General Public License for more details. |
| 20 |
* |
| 21 |
* Or, alternatively, |
| 22 |
* |
| 23 |
* b) Permission is hereby granted, free of charge, to any person |
| 24 |
* obtaining a copy of this software and associated documentation |
| 25 |
* files (the "Software"), to deal in the Software without |
| 26 |
* restriction, including without limitation the rights to use, |
| 27 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 28 |
* sell copies of the Software, and to permit persons to whom the |
| 29 |
* Software is furnished to do so, subject to the following |
| 30 |
* conditions: |
| 31 |
* |
| 32 |
* The above copyright notice and this permission notice shall be |
| 33 |
* included in all copies or substantial portions of the Software. |
| 34 |
* |
| 35 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 36 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 37 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 38 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 39 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 40 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 41 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 42 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 43 |
*/ |
| 44 |
|
| 45 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 46 |
|
| 47 |
#include <dt-bindings/clock/sun9i-a80-ccu.h> |
| 48 |
#include <dt-bindings/clock/sun9i-a80-de.h> |
| 49 |
#include <dt-bindings/clock/sun9i-a80-usb.h> |
| 50 |
#include <dt-bindings/reset/sun9i-a80-ccu.h> |
| 51 |
#include <dt-bindings/reset/sun9i-a80-de.h> |
| 52 |
#include <dt-bindings/reset/sun9i-a80-usb.h> |
| 53 |
|
| 54 |
/ { |
| 55 |
#address-cells = <2>; |
| 56 |
#size-cells = <2>; |
| 57 |
interrupt-parent = <&gic>; |
| 58 |
|
| 59 |
aliases { |
| 60 |
ethernet0 = &gmac; |
| 61 |
}; |
| 62 |
|
| 63 |
cpus { |
| 64 |
#address-cells = <1>; |
| 65 |
#size-cells = <0>; |
| 66 |
|
| 67 |
cpu0: cpu@0 { |
| 68 |
compatible = "arm,cortex-a7"; |
| 69 |
device_type = "cpu"; |
| 70 |
cci-control-port = <&cci_control0>; |
| 71 |
clock-frequency = <12000000>; |
| 72 |
enable-method = "allwinner,sun9i-a80-smp"; |
| 73 |
reg = <0x0>; |
| 74 |
}; |
| 75 |
|
| 76 |
cpu1: cpu@1 { |
| 77 |
compatible = "arm,cortex-a7"; |
| 78 |
device_type = "cpu"; |
| 79 |
cci-control-port = <&cci_control0>; |
| 80 |
clock-frequency = <12000000>; |
| 81 |
enable-method = "allwinner,sun9i-a80-smp"; |
| 82 |
reg = <0x1>; |
| 83 |
}; |
| 84 |
|
| 85 |
cpu2: cpu@2 { |
| 86 |
compatible = "arm,cortex-a7"; |
| 87 |
device_type = "cpu"; |
| 88 |
cci-control-port = <&cci_control0>; |
| 89 |
clock-frequency = <12000000>; |
| 90 |
enable-method = "allwinner,sun9i-a80-smp"; |
| 91 |
reg = <0x2>; |
| 92 |
}; |
| 93 |
|
| 94 |
cpu3: cpu@3 { |
| 95 |
compatible = "arm,cortex-a7"; |
| 96 |
device_type = "cpu"; |
| 97 |
cci-control-port = <&cci_control0>; |
| 98 |
clock-frequency = <12000000>; |
| 99 |
enable-method = "allwinner,sun9i-a80-smp"; |
| 100 |
reg = <0x3>; |
| 101 |
}; |
| 102 |
|
| 103 |
cpu4: cpu@100 { |
| 104 |
compatible = "arm,cortex-a15"; |
| 105 |
device_type = "cpu"; |
| 106 |
cci-control-port = <&cci_control1>; |
| 107 |
clock-frequency = <18000000>; |
| 108 |
enable-method = "allwinner,sun9i-a80-smp"; |
| 109 |
reg = <0x100>; |
| 110 |
}; |
| 111 |
|
| 112 |
cpu5: cpu@101 { |
| 113 |
compatible = "arm,cortex-a15"; |
| 114 |
device_type = "cpu"; |
| 115 |
cci-control-port = <&cci_control1>; |
| 116 |
clock-frequency = <18000000>; |
| 117 |
enable-method = "allwinner,sun9i-a80-smp"; |
| 118 |
reg = <0x101>; |
| 119 |
}; |
| 120 |
|
| 121 |
cpu6: cpu@102 { |
| 122 |
compatible = "arm,cortex-a15"; |
| 123 |
device_type = "cpu"; |
| 124 |
cci-control-port = <&cci_control1>; |
| 125 |
clock-frequency = <18000000>; |
| 126 |
enable-method = "allwinner,sun9i-a80-smp"; |
| 127 |
reg = <0x102>; |
| 128 |
}; |
| 129 |
|
| 130 |
cpu7: cpu@103 { |
| 131 |
compatible = "arm,cortex-a15"; |
| 132 |
device_type = "cpu"; |
| 133 |
cci-control-port = <&cci_control1>; |
| 134 |
clock-frequency = <18000000>; |
| 135 |
enable-method = "allwinner,sun9i-a80-smp"; |
| 136 |
reg = <0x103>; |
| 137 |
}; |
| 138 |
}; |
| 139 |
|
| 140 |
timer { |
| 141 |
compatible = "arm,armv7-timer"; |
| 142 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 143 |
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 144 |
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 145 |
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 146 |
clock-frequency = <24000000>; |
| 147 |
arm,cpu-registers-not-fw-configured; |
| 148 |
}; |
| 149 |
|
| 150 |
clocks { |
| 151 |
#address-cells = <1>; |
| 152 |
#size-cells = <1>; |
| 153 |
/* |
| 154 |
* map 64 bit address range down to 32 bits, |
| 155 |
* as the peripherals are all under 512MB. |
| 156 |
*/ |
| 157 |
ranges = <0 0 0 0x20000000>; |
| 158 |
|
| 159 |
/* |
| 160 |
* This clock is actually configurable from the PRCM address |
| 161 |
* space. The external 24M oscillator can be turned off, and |
| 162 |
* the clock switched to an internal 16M RC oscillator. Under |
| 163 |
* normal operation there's no reason to do this, and the |
| 164 |
* default is to use the external good one, so just model this |
| 165 |
* as a fixed clock. Also it is not entirely clear if the |
| 166 |
* osc24M mux in the PRCM affects the entire clock tree, which |
| 167 |
* would also throw all the PLL clock rates off, or just the |
| 168 |
* downstream clocks in the PRCM. |
| 169 |
*/ |
| 170 |
osc24M: clk-24M { |
| 171 |
#clock-cells = <0>; |
| 172 |
compatible = "fixed-clock"; |
| 173 |
clock-frequency = <24000000>; |
| 174 |
clock-output-names = "osc24M"; |
| 175 |
}; |
| 176 |
|
| 177 |
/* |
| 178 |
* The 32k clock is from an external source, normally the |
| 179 |
* AC100 codec/RTC chip. This serves as a placeholder for |
| 180 |
* board dts files to specify the source. |
| 181 |
*/ |
| 182 |
osc32k: clk-32k { |
| 183 |
#clock-cells = <0>; |
| 184 |
compatible = "fixed-factor-clock"; |
| 185 |
clock-div = <1>; |
| 186 |
clock-mult = <1>; |
| 187 |
clock-output-names = "osc32k"; |
| 188 |
}; |
| 189 |
|
| 190 |
/* |
| 191 |
* The following two are dummy clocks, placeholders |
| 192 |
* used in the gmac_tx clock. The gmac driver will |
| 193 |
* choose one parent depending on the PHY interface |
| 194 |
* mode, using clk_set_rate auto-reparenting. |
| 195 |
* |
| 196 |
* The actual TX clock rate is not controlled by the |
| 197 |
* gmac_tx clock. |
| 198 |
*/ |
| 199 |
mii_phy_tx_clk: mii-phy-tx-clk { |
| 200 |
#clock-cells = <0>; |
| 201 |
compatible = "fixed-clock"; |
| 202 |
clock-frequency = <25000000>; |
| 203 |
clock-output-names = "mii_phy_tx"; |
| 204 |
}; |
| 205 |
|
| 206 |
gmac_int_tx_clk: gmac-int-tx-clk { |
| 207 |
#clock-cells = <0>; |
| 208 |
compatible = "fixed-clock"; |
| 209 |
clock-frequency = <125000000>; |
| 210 |
clock-output-names = "gmac_int_tx"; |
| 211 |
}; |
| 212 |
|
| 213 |
gmac_tx_clk: clk@800030 { |
| 214 |
#clock-cells = <0>; |
| 215 |
compatible = "allwinner,sun7i-a20-gmac-clk"; |
| 216 |
reg = <0x00800030 0x4>; |
| 217 |
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; |
| 218 |
clock-output-names = "gmac_tx"; |
| 219 |
}; |
| 220 |
|
| 221 |
cpus_clk: clk@8001410 { |
| 222 |
compatible = "allwinner,sun9i-a80-cpus-clk"; |
| 223 |
reg = <0x08001410 0x4>; |
| 224 |
#clock-cells = <0>; |
| 225 |
clocks = <&osc32k>, <&osc24M>, |
| 226 |
<&ccu CLK_PLL_PERIPH0>, |
| 227 |
<&ccu CLK_PLL_AUDIO>; |
| 228 |
clock-output-names = "cpus"; |
| 229 |
}; |
| 230 |
|
| 231 |
ahbs: clk-ahbs { |
| 232 |
compatible = "fixed-factor-clock"; |
| 233 |
#clock-cells = <0>; |
| 234 |
clock-div = <1>; |
| 235 |
clock-mult = <1>; |
| 236 |
clocks = <&cpus_clk>; |
| 237 |
clock-output-names = "ahbs"; |
| 238 |
}; |
| 239 |
|
| 240 |
apbs: clk@800141c { |
| 241 |
compatible = "allwinner,sun8i-a23-apb0-clk"; |
| 242 |
reg = <0x0800141c 0x4>; |
| 243 |
#clock-cells = <0>; |
| 244 |
clocks = <&ahbs>; |
| 245 |
clock-output-names = "apbs"; |
| 246 |
}; |
| 247 |
|
| 248 |
apbs_gates: clk@8001428 { |
| 249 |
compatible = "allwinner,sun9i-a80-apbs-gates-clk"; |
| 250 |
reg = <0x08001428 0x4>; |
| 251 |
#clock-cells = <1>; |
| 252 |
clocks = <&apbs>; |
| 253 |
clock-indices = <0>, <1>, |
| 254 |
<2>, <3>, |
| 255 |
<4>, <5>, |
| 256 |
<6>, <7>, |
| 257 |
<12>, <13>, |
| 258 |
<16>, <17>, |
| 259 |
<18>, <20>; |
| 260 |
clock-output-names = "apbs_pio", "apbs_ir", |
| 261 |
"apbs_timer", "apbs_rsb", |
| 262 |
"apbs_uart", "apbs_1wire", |
| 263 |
"apbs_i2c0", "apbs_i2c1", |
| 264 |
"apbs_ps2_0", "apbs_ps2_1", |
| 265 |
"apbs_dma", "apbs_i2s0", |
| 266 |
"apbs_i2s1", "apbs_twd"; |
| 267 |
}; |
| 268 |
|
| 269 |
r_1wire_clk: clk@8001450 { |
| 270 |
reg = <0x08001450 0x4>; |
| 271 |
#clock-cells = <0>; |
| 272 |
compatible = "allwinner,sun4i-a10-mod0-clk"; |
| 273 |
clocks = <&osc32k>, <&osc24M>; |
| 274 |
clock-output-names = "r_1wire"; |
| 275 |
}; |
| 276 |
|
| 277 |
r_ir_clk: clk@8001454 { |
| 278 |
reg = <0x08001454 0x4>; |
| 279 |
#clock-cells = <0>; |
| 280 |
compatible = "allwinner,sun4i-a10-mod0-clk"; |
| 281 |
clocks = <&osc32k>, <&osc24M>; |
| 282 |
clock-output-names = "r_ir"; |
| 283 |
}; |
| 284 |
}; |
| 285 |
|
| 286 |
de: display-engine { |
| 287 |
compatible = "allwinner,sun9i-a80-display-engine"; |
| 288 |
allwinner,pipelines = <&fe0>, <&fe1>; |
| 289 |
status = "disabled"; |
| 290 |
}; |
| 291 |
|
| 292 |
soc@20000 { |
| 293 |
compatible = "simple-bus"; |
| 294 |
#address-cells = <1>; |
| 295 |
#size-cells = <1>; |
| 296 |
/* |
| 297 |
* map 64 bit address range down to 32 bits, |
| 298 |
* as the peripherals are all under 512MB. |
| 299 |
*/ |
| 300 |
ranges = <0 0 0 0x20000000>; |
| 301 |
|
| 302 |
sram_b: sram@20000 { |
| 303 |
/* 256 KiB secure SRAM at 0x20000 */ |
| 304 |
compatible = "mmio-sram"; |
| 305 |
reg = <0x00020000 0x40000>; |
| 306 |
|
| 307 |
#address-cells = <1>; |
| 308 |
#size-cells = <1>; |
| 309 |
ranges = <0 0x00020000 0x40000>; |
| 310 |
|
| 311 |
smp-sram@1000 { |
| 312 |
/* |
| 313 |
* This is checked by BROM to determine if |
| 314 |
* cpu0 should jump to SMP entry vector |
| 315 |
*/ |
| 316 |
compatible = "allwinner,sun9i-a80-smp-sram"; |
| 317 |
reg = <0x1000 0x8>; |
| 318 |
}; |
| 319 |
}; |
| 320 |
|
| 321 |
gmac: ethernet@830000 { |
| 322 |
compatible = "allwinner,sun7i-a20-gmac"; |
| 323 |
reg = <0x00830000 0x1054>; |
| 324 |
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| 325 |
interrupt-names = "macirq"; |
| 326 |
clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>; |
| 327 |
clock-names = "stmmaceth", "allwinner_gmac_tx"; |
| 328 |
resets = <&ccu RST_BUS_GMAC>; |
| 329 |
reset-names = "stmmaceth"; |
| 330 |
snps,pbl = <2>; |
| 331 |
snps,fixed-burst; |
| 332 |
snps,force_sf_dma_mode; |
| 333 |
status = "disabled"; |
| 334 |
|
| 335 |
mdio: mdio { |
| 336 |
compatible = "snps,dwmac-mdio"; |
| 337 |
#address-cells = <1>; |
| 338 |
#size-cells = <0>; |
| 339 |
}; |
| 340 |
}; |
| 341 |
|
| 342 |
ehci0: usb@a00000 { |
| 343 |
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; |
| 344 |
reg = <0x00a00000 0x100>; |
| 345 |
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| 346 |
clocks = <&usb_clocks CLK_BUS_HCI0>; |
| 347 |
resets = <&usb_clocks RST_USB0_HCI>; |
| 348 |
phys = <&usbphy1>; |
| 349 |
phy-names = "usb"; |
| 350 |
status = "disabled"; |
| 351 |
}; |
| 352 |
|
| 353 |
ohci0: usb@a00400 { |
| 354 |
compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; |
| 355 |
reg = <0x00a00400 0x100>; |
| 356 |
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 357 |
clocks = <&usb_clocks CLK_BUS_HCI0>, |
| 358 |
<&usb_clocks CLK_USB_OHCI0>; |
| 359 |
resets = <&usb_clocks RST_USB0_HCI>; |
| 360 |
phys = <&usbphy1>; |
| 361 |
phy-names = "usb"; |
| 362 |
status = "disabled"; |
| 363 |
}; |
| 364 |
|
| 365 |
usbphy1: phy@a00800 { |
| 366 |
compatible = "allwinner,sun9i-a80-usb-phy"; |
| 367 |
reg = <0x00a00800 0x4>; |
| 368 |
clocks = <&usb_clocks CLK_USB0_PHY>; |
| 369 |
clock-names = "phy"; |
| 370 |
resets = <&usb_clocks RST_USB0_PHY>; |
| 371 |
reset-names = "phy"; |
| 372 |
status = "disabled"; |
| 373 |
#phy-cells = <0>; |
| 374 |
}; |
| 375 |
|
| 376 |
ehci1: usb@a01000 { |
| 377 |
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; |
| 378 |
reg = <0x00a01000 0x100>; |
| 379 |
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| 380 |
clocks = <&usb_clocks CLK_BUS_HCI1>; |
| 381 |
resets = <&usb_clocks RST_USB1_HCI>; |
| 382 |
phys = <&usbphy2>; |
| 383 |
phy-names = "usb"; |
| 384 |
status = "disabled"; |
| 385 |
}; |
| 386 |
|
| 387 |
usbphy2: phy@a01800 { |
| 388 |
compatible = "allwinner,sun9i-a80-usb-phy"; |
| 389 |
reg = <0x00a01800 0x4>; |
| 390 |
clocks = <&usb_clocks CLK_USB1_PHY>, |
| 391 |
<&usb_clocks CLK_USB_HSIC>, |
| 392 |
<&usb_clocks CLK_USB1_HSIC>; |
| 393 |
clock-names = "phy", |
| 394 |
"hsic_12M", |
| 395 |
"hsic_480M"; |
| 396 |
resets = <&usb_clocks RST_USB1_PHY>, |
| 397 |
<&usb_clocks RST_USB1_HSIC>; |
| 398 |
reset-names = "phy", |
| 399 |
"hsic"; |
| 400 |
status = "disabled"; |
| 401 |
#phy-cells = <0>; |
| 402 |
/* usb1 is always used with HSIC */ |
| 403 |
phy_type = "hsic"; |
| 404 |
}; |
| 405 |
|
| 406 |
ehci2: usb@a02000 { |
| 407 |
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; |
| 408 |
reg = <0x00a02000 0x100>; |
| 409 |
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| 410 |
clocks = <&usb_clocks CLK_BUS_HCI2>; |
| 411 |
resets = <&usb_clocks RST_USB2_HCI>; |
| 412 |
phys = <&usbphy3>; |
| 413 |
phy-names = "usb"; |
| 414 |
status = "disabled"; |
| 415 |
}; |
| 416 |
|
| 417 |
ohci2: usb@a02400 { |
| 418 |
compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; |
| 419 |
reg = <0x00a02400 0x100>; |
| 420 |
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| 421 |
clocks = <&usb_clocks CLK_BUS_HCI2>, |
| 422 |
<&usb_clocks CLK_USB_OHCI2>; |
| 423 |
resets = <&usb_clocks RST_USB2_HCI>; |
| 424 |
phys = <&usbphy3>; |
| 425 |
phy-names = "usb"; |
| 426 |
status = "disabled"; |
| 427 |
}; |
| 428 |
|
| 429 |
usbphy3: phy@a02800 { |
| 430 |
compatible = "allwinner,sun9i-a80-usb-phy"; |
| 431 |
reg = <0x00a02800 0x4>; |
| 432 |
clocks = <&usb_clocks CLK_USB2_PHY>, |
| 433 |
<&usb_clocks CLK_USB_HSIC>, |
| 434 |
<&usb_clocks CLK_USB2_HSIC>; |
| 435 |
clock-names = "phy", |
| 436 |
"hsic_12M", |
| 437 |
"hsic_480M"; |
| 438 |
resets = <&usb_clocks RST_USB2_PHY>, |
| 439 |
<&usb_clocks RST_USB2_HSIC>; |
| 440 |
reset-names = "phy", |
| 441 |
"hsic"; |
| 442 |
status = "disabled"; |
| 443 |
#phy-cells = <0>; |
| 444 |
}; |
| 445 |
|
| 446 |
usb_clocks: clock@a08000 { |
| 447 |
compatible = "allwinner,sun9i-a80-usb-clks"; |
| 448 |
reg = <0x00a08000 0x8>; |
| 449 |
clocks = <&ccu CLK_BUS_USB>, <&osc24M>; |
| 450 |
clock-names = "bus", "hosc"; |
| 451 |
#clock-cells = <1>; |
| 452 |
#reset-cells = <1>; |
| 453 |
}; |
| 454 |
|
| 455 |
cpucfg@1700000 { |
| 456 |
compatible = "allwinner,sun9i-a80-cpucfg"; |
| 457 |
reg = <0x01700000 0x100>; |
| 458 |
}; |
| 459 |
|
| 460 |
crypto: crypto@1c02000 { |
| 461 |
compatible = "allwinner,sun9i-a80-crypto"; |
| 462 |
reg = <0x01c02000 0x1000>; |
| 463 |
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| 464 |
resets = <&ccu RST_BUS_SS>; |
| 465 |
clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; |
| 466 |
clock-names = "bus", "mod"; |
| 467 |
}; |
| 468 |
|
| 469 |
mmc0: mmc@1c0f000 { |
| 470 |
compatible = "allwinner,sun9i-a80-mmc"; |
| 471 |
reg = <0x01c0f000 0x1000>; |
| 472 |
clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>, |
| 473 |
<&ccu CLK_MMC0_OUTPUT>, |
| 474 |
<&ccu CLK_MMC0_SAMPLE>; |
| 475 |
clock-names = "ahb", "mmc", "output", "sample"; |
| 476 |
resets = <&mmc_config_clk 0>; |
| 477 |
reset-names = "ahb"; |
| 478 |
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| 479 |
status = "disabled"; |
| 480 |
#address-cells = <1>; |
| 481 |
#size-cells = <0>; |
| 482 |
}; |
| 483 |
|
| 484 |
mmc1: mmc@1c10000 { |
| 485 |
compatible = "allwinner,sun9i-a80-mmc"; |
| 486 |
reg = <0x01c10000 0x1000>; |
| 487 |
clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>, |
| 488 |
<&ccu CLK_MMC1_OUTPUT>, |
| 489 |
<&ccu CLK_MMC1_SAMPLE>; |
| 490 |
clock-names = "ahb", "mmc", "output", "sample"; |
| 491 |
resets = <&mmc_config_clk 1>; |
| 492 |
reset-names = "ahb"; |
| 493 |
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| 494 |
status = "disabled"; |
| 495 |
#address-cells = <1>; |
| 496 |
#size-cells = <0>; |
| 497 |
}; |
| 498 |
|
| 499 |
mmc2: mmc@1c11000 { |
| 500 |
compatible = "allwinner,sun9i-a80-mmc"; |
| 501 |
reg = <0x01c11000 0x1000>; |
| 502 |
clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>, |
| 503 |
<&ccu CLK_MMC2_OUTPUT>, |
| 504 |
<&ccu CLK_MMC2_SAMPLE>; |
| 505 |
clock-names = "ahb", "mmc", "output", "sample"; |
| 506 |
resets = <&mmc_config_clk 2>; |
| 507 |
reset-names = "ahb"; |
| 508 |
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| 509 |
status = "disabled"; |
| 510 |
#address-cells = <1>; |
| 511 |
#size-cells = <0>; |
| 512 |
}; |
| 513 |
|
| 514 |
mmc3: mmc@1c12000 { |
| 515 |
compatible = "allwinner,sun9i-a80-mmc"; |
| 516 |
reg = <0x01c12000 0x1000>; |
| 517 |
clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>, |
| 518 |
<&ccu CLK_MMC3_OUTPUT>, |
| 519 |
<&ccu CLK_MMC3_SAMPLE>; |
| 520 |
clock-names = "ahb", "mmc", "output", "sample"; |
| 521 |
resets = <&mmc_config_clk 3>; |
| 522 |
reset-names = "ahb"; |
| 523 |
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| 524 |
status = "disabled"; |
| 525 |
#address-cells = <1>; |
| 526 |
#size-cells = <0>; |
| 527 |
}; |
| 528 |
|
| 529 |
mmc_config_clk: clk@1c13000 { |
| 530 |
compatible = "allwinner,sun9i-a80-mmc-config-clk"; |
| 531 |
reg = <0x01c13000 0x10>; |
| 532 |
clocks = <&ccu CLK_BUS_MMC>; |
| 533 |
resets = <&ccu RST_BUS_MMC>; |
| 534 |
#clock-cells = <1>; |
| 535 |
#reset-cells = <1>; |
| 536 |
clock-output-names = "mmc0_config", "mmc1_config", |
| 537 |
"mmc2_config", "mmc3_config"; |
| 538 |
}; |
| 539 |
|
| 540 |
gic: interrupt-controller@1c41000 { |
| 541 |
compatible = "arm,gic-400"; |
| 542 |
reg = <0x01c41000 0x1000>, |
| 543 |
<0x01c42000 0x2000>, |
| 544 |
<0x01c44000 0x2000>, |
| 545 |
<0x01c46000 0x2000>; |
| 546 |
interrupt-controller; |
| 547 |
#interrupt-cells = <3>; |
| 548 |
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 549 |
}; |
| 550 |
|
| 551 |
cci: cci@1c90000 { |
| 552 |
compatible = "arm,cci-400"; |
| 553 |
#address-cells = <1>; |
| 554 |
#size-cells = <1>; |
| 555 |
reg = <0x01c90000 0x1000>; |
| 556 |
ranges = <0x0 0x01c90000 0x10000>; |
| 557 |
|
| 558 |
cci_control0: slave-if@4000 { |
| 559 |
compatible = "arm,cci-400-ctrl-if"; |
| 560 |
interface-type = "ace"; |
| 561 |
reg = <0x4000 0x1000>; |
| 562 |
}; |
| 563 |
|
| 564 |
cci_control1: slave-if@5000 { |
| 565 |
compatible = "arm,cci-400-ctrl-if"; |
| 566 |
interface-type = "ace"; |
| 567 |
reg = <0x5000 0x1000>; |
| 568 |
}; |
| 569 |
|
| 570 |
pmu@9000 { |
| 571 |
compatible = "arm,cci-400-pmu,r1"; |
| 572 |
reg = <0x9000 0x5000>; |
| 573 |
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| 574 |
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| 575 |
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| 576 |
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| 577 |
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; |
| 578 |
}; |
| 579 |
}; |
| 580 |
|
| 581 |
de_clocks: clock@3000000 { |
| 582 |
compatible = "allwinner,sun9i-a80-de-clks"; |
| 583 |
reg = <0x03000000 0x30>; |
| 584 |
clocks = <&ccu CLK_DE>, |
| 585 |
<&ccu CLK_SDRAM>, |
| 586 |
<&ccu CLK_BUS_DE>; |
| 587 |
clock-names = "mod", |
| 588 |
"dram", |
| 589 |
"bus"; |
| 590 |
resets = <&ccu RST_BUS_DE>; |
| 591 |
#clock-cells = <1>; |
| 592 |
#reset-cells = <1>; |
| 593 |
}; |
| 594 |
|
| 595 |
fe0: display-frontend@3100000 { |
| 596 |
compatible = "allwinner,sun9i-a80-display-frontend"; |
| 597 |
reg = <0x03100000 0x40000>; |
| 598 |
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| 599 |
clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>, |
| 600 |
<&de_clocks CLK_DRAM_FE0>; |
| 601 |
clock-names = "ahb", "mod", |
| 602 |
"ram"; |
| 603 |
resets = <&de_clocks RST_FE0>; |
| 604 |
|
| 605 |
ports { |
| 606 |
#address-cells = <1>; |
| 607 |
#size-cells = <0>; |
| 608 |
|
| 609 |
fe0_out: port@1 { |
| 610 |
reg = <1>; |
| 611 |
|
| 612 |
fe0_out_deu0: endpoint { |
| 613 |
remote-endpoint = <&deu0_in_fe0>; |
| 614 |
}; |
| 615 |
}; |
| 616 |
}; |
| 617 |
}; |
| 618 |
|
| 619 |
fe1: display-frontend@3140000 { |
| 620 |
compatible = "allwinner,sun9i-a80-display-frontend"; |
| 621 |
reg = <0x03140000 0x40000>; |
| 622 |
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| 623 |
clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>, |
| 624 |
<&de_clocks CLK_DRAM_FE1>; |
| 625 |
clock-names = "ahb", "mod", |
| 626 |
"ram"; |
| 627 |
resets = <&de_clocks RST_FE0>; |
| 628 |
|
| 629 |
ports { |
| 630 |
#address-cells = <1>; |
| 631 |
#size-cells = <0>; |
| 632 |
|
| 633 |
fe1_out: port@1 { |
| 634 |
reg = <1>; |
| 635 |
|
| 636 |
fe1_out_deu1: endpoint { |
| 637 |
remote-endpoint = <&deu1_in_fe1>; |
| 638 |
}; |
| 639 |
}; |
| 640 |
}; |
| 641 |
}; |
| 642 |
|
| 643 |
be0: display-backend@3200000 { |
| 644 |
compatible = "allwinner,sun9i-a80-display-backend"; |
| 645 |
reg = <0x03200000 0x40000>; |
| 646 |
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 647 |
clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>, |
| 648 |
<&de_clocks CLK_DRAM_BE0>; |
| 649 |
clock-names = "ahb", "mod", |
| 650 |
"ram"; |
| 651 |
resets = <&de_clocks RST_BE0>; |
| 652 |
|
| 653 |
ports { |
| 654 |
#address-cells = <1>; |
| 655 |
#size-cells = <0>; |
| 656 |
|
| 657 |
be0_in: port@0 { |
| 658 |
#address-cells = <1>; |
| 659 |
#size-cells = <0>; |
| 660 |
reg = <0>; |
| 661 |
|
| 662 |
be0_in_deu0: endpoint@0 { |
| 663 |
reg = <0>; |
| 664 |
remote-endpoint = <&deu0_out_be0>; |
| 665 |
}; |
| 666 |
|
| 667 |
be0_in_deu1: endpoint@1 { |
| 668 |
reg = <1>; |
| 669 |
remote-endpoint = <&deu1_out_be0>; |
| 670 |
}; |
| 671 |
}; |
| 672 |
|
| 673 |
be0_out: port@1 { |
| 674 |
reg = <1>; |
| 675 |
|
| 676 |
be0_out_drc0: endpoint { |
| 677 |
remote-endpoint = <&drc0_in_be0>; |
| 678 |
}; |
| 679 |
}; |
| 680 |
}; |
| 681 |
}; |
| 682 |
|
| 683 |
be1: display-backend@3240000 { |
| 684 |
compatible = "allwinner,sun9i-a80-display-backend"; |
| 685 |
reg = <0x03240000 0x40000>; |
| 686 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 687 |
clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>, |
| 688 |
<&de_clocks CLK_DRAM_BE1>; |
| 689 |
clock-names = "ahb", "mod", |
| 690 |
"ram"; |
| 691 |
resets = <&de_clocks RST_BE1>; |
| 692 |
|
| 693 |
ports { |
| 694 |
#address-cells = <1>; |
| 695 |
#size-cells = <0>; |
| 696 |
|
| 697 |
be1_in: port@0 { |
| 698 |
#address-cells = <1>; |
| 699 |
#size-cells = <0>; |
| 700 |
reg = <0>; |
| 701 |
|
| 702 |
be1_in_deu0: endpoint@0 { |
| 703 |
reg = <0>; |
| 704 |
remote-endpoint = <&deu0_out_be1>; |
| 705 |
}; |
| 706 |
|
| 707 |
be1_in_deu1: endpoint@1 { |
| 708 |
reg = <1>; |
| 709 |
remote-endpoint = <&deu1_out_be1>; |
| 710 |
}; |
| 711 |
}; |
| 712 |
|
| 713 |
be1_out: port@1 { |
| 714 |
reg = <1>; |
| 715 |
|
| 716 |
be1_out_drc1: endpoint { |
| 717 |
remote-endpoint = <&drc1_in_be1>; |
| 718 |
}; |
| 719 |
}; |
| 720 |
}; |
| 721 |
}; |
| 722 |
|
| 723 |
deu0: deu@3300000 { |
| 724 |
compatible = "allwinner,sun9i-a80-deu"; |
| 725 |
reg = <0x03300000 0x40000>; |
| 726 |
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; |
| 727 |
clocks = <&de_clocks CLK_BUS_DEU0>, |
| 728 |
<&de_clocks CLK_IEP_DEU0>, |
| 729 |
<&de_clocks CLK_DRAM_DEU0>; |
| 730 |
clock-names = "ahb", |
| 731 |
"mod", |
| 732 |
"ram"; |
| 733 |
resets = <&de_clocks RST_DEU0>; |
| 734 |
|
| 735 |
ports { |
| 736 |
#address-cells = <1>; |
| 737 |
#size-cells = <0>; |
| 738 |
|
| 739 |
deu0_in: port@0 { |
| 740 |
reg = <0>; |
| 741 |
|
| 742 |
deu0_in_fe0: endpoint { |
| 743 |
remote-endpoint = <&fe0_out_deu0>; |
| 744 |
}; |
| 745 |
}; |
| 746 |
|
| 747 |
deu0_out: port@1 { |
| 748 |
#address-cells = <1>; |
| 749 |
#size-cells = <0>; |
| 750 |
reg = <1>; |
| 751 |
|
| 752 |
deu0_out_be0: endpoint@0 { |
| 753 |
reg = <0>; |
| 754 |
remote-endpoint = <&be0_in_deu0>; |
| 755 |
}; |
| 756 |
|
| 757 |
deu0_out_be1: endpoint@1 { |
| 758 |
reg = <1>; |
| 759 |
remote-endpoint = <&be1_in_deu0>; |
| 760 |
}; |
| 761 |
}; |
| 762 |
}; |
| 763 |
}; |
| 764 |
|
| 765 |
deu1: deu@3340000 { |
| 766 |
compatible = "allwinner,sun9i-a80-deu"; |
| 767 |
reg = <0x03340000 0x40000>; |
| 768 |
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; |
| 769 |
clocks = <&de_clocks CLK_BUS_DEU1>, |
| 770 |
<&de_clocks CLK_IEP_DEU1>, |
| 771 |
<&de_clocks CLK_DRAM_DEU1>; |
| 772 |
clock-names = "ahb", |
| 773 |
"mod", |
| 774 |
"ram"; |
| 775 |
resets = <&de_clocks RST_DEU1>; |
| 776 |
|
| 777 |
ports { |
| 778 |
#address-cells = <1>; |
| 779 |
#size-cells = <0>; |
| 780 |
|
| 781 |
deu1_in: port@0 { |
| 782 |
reg = <0>; |
| 783 |
|
| 784 |
deu1_in_fe1: endpoint { |
| 785 |
remote-endpoint = <&fe1_out_deu1>; |
| 786 |
}; |
| 787 |
}; |
| 788 |
|
| 789 |
deu1_out: port@1 { |
| 790 |
#address-cells = <1>; |
| 791 |
#size-cells = <0>; |
| 792 |
reg = <1>; |
| 793 |
|
| 794 |
deu1_out_be0: endpoint@0 { |
| 795 |
reg = <0>; |
| 796 |
remote-endpoint = <&be0_in_deu1>; |
| 797 |
}; |
| 798 |
|
| 799 |
deu1_out_be1: endpoint@1 { |
| 800 |
reg = <1>; |
| 801 |
remote-endpoint = <&be1_in_deu1>; |
| 802 |
}; |
| 803 |
}; |
| 804 |
}; |
| 805 |
}; |
| 806 |
|
| 807 |
drc0: drc@3400000 { |
| 808 |
compatible = "allwinner,sun9i-a80-drc"; |
| 809 |
reg = <0x03400000 0x40000>; |
| 810 |
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| 811 |
clocks = <&de_clocks CLK_BUS_DRC0>, |
| 812 |
<&de_clocks CLK_IEP_DRC0>, |
| 813 |
<&de_clocks CLK_DRAM_DRC0>; |
| 814 |
clock-names = "ahb", |
| 815 |
"mod", |
| 816 |
"ram"; |
| 817 |
resets = <&de_clocks RST_DRC0>; |
| 818 |
|
| 819 |
ports { |
| 820 |
#address-cells = <1>; |
| 821 |
#size-cells = <0>; |
| 822 |
|
| 823 |
drc0_in: port@0 { |
| 824 |
reg = <0>; |
| 825 |
|
| 826 |
drc0_in_be0: endpoint { |
| 827 |
remote-endpoint = <&be0_out_drc0>; |
| 828 |
}; |
| 829 |
}; |
| 830 |
|
| 831 |
drc0_out: port@1 { |
| 832 |
reg = <1>; |
| 833 |
|
| 834 |
drc0_out_tcon0: endpoint { |
| 835 |
remote-endpoint = <&tcon0_in_drc0>; |
| 836 |
}; |
| 837 |
}; |
| 838 |
}; |
| 839 |
}; |
| 840 |
|
| 841 |
drc1: drc@3440000 { |
| 842 |
compatible = "allwinner,sun9i-a80-drc"; |
| 843 |
reg = <0x03440000 0x40000>; |
| 844 |
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| 845 |
clocks = <&de_clocks CLK_BUS_DRC1>, |
| 846 |
<&de_clocks CLK_IEP_DRC1>, |
| 847 |
<&de_clocks CLK_DRAM_DRC1>; |
| 848 |
clock-names = "ahb", |
| 849 |
"mod", |
| 850 |
"ram"; |
| 851 |
resets = <&de_clocks RST_DRC1>; |
| 852 |
|
| 853 |
ports { |
| 854 |
#address-cells = <1>; |
| 855 |
#size-cells = <0>; |
| 856 |
|
| 857 |
drc1_in: port@0 { |
| 858 |
reg = <0>; |
| 859 |
|
| 860 |
drc1_in_be1: endpoint { |
| 861 |
remote-endpoint = <&be1_out_drc1>; |
| 862 |
}; |
| 863 |
}; |
| 864 |
|
| 865 |
drc1_out: port@1 { |
| 866 |
reg = <1>; |
| 867 |
|
| 868 |
drc1_out_tcon1: endpoint { |
| 869 |
remote-endpoint = <&tcon1_in_drc1>; |
| 870 |
}; |
| 871 |
}; |
| 872 |
}; |
| 873 |
}; |
| 874 |
|
| 875 |
tcon0: lcd-controller@3c00000 { |
| 876 |
compatible = "allwinner,sun9i-a80-tcon-lcd"; |
| 877 |
reg = <0x03c00000 0x10000>; |
| 878 |
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 879 |
clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>; |
| 880 |
clock-names = "ahb", "tcon-ch0"; |
| 881 |
resets = <&ccu RST_BUS_LCD0>, |
| 882 |
<&ccu RST_BUS_EDP>, |
| 883 |
<&ccu RST_BUS_LVDS>; |
| 884 |
reset-names = "lcd", |
| 885 |
"edp", |
| 886 |
"lvds"; |
| 887 |
clock-output-names = "tcon0-pixel-clock"; |
| 888 |
#clock-cells = <0>; |
| 889 |
|
| 890 |
ports { |
| 891 |
#address-cells = <1>; |
| 892 |
#size-cells = <0>; |
| 893 |
|
| 894 |
tcon0_in: port@0 { |
| 895 |
reg = <0>; |
| 896 |
|
| 897 |
tcon0_in_drc0: endpoint { |
| 898 |
remote-endpoint = <&drc0_out_tcon0>; |
| 899 |
}; |
| 900 |
}; |
| 901 |
|
| 902 |
tcon0_out: port@1 { |
| 903 |
reg = <1>; |
| 904 |
}; |
| 905 |
}; |
| 906 |
}; |
| 907 |
|
| 908 |
tcon1: lcd-controller@3c10000 { |
| 909 |
compatible = "allwinner,sun9i-a80-tcon-tv"; |
| 910 |
reg = <0x03c10000 0x10000>; |
| 911 |
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| 912 |
clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>; |
| 913 |
clock-names = "ahb", "tcon-ch1"; |
| 914 |
resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>; |
| 915 |
reset-names = "lcd", "edp"; |
| 916 |
|
| 917 |
ports { |
| 918 |
#address-cells = <1>; |
| 919 |
#size-cells = <0>; |
| 920 |
|
| 921 |
tcon1_in: port@0 { |
| 922 |
reg = <0>; |
| 923 |
|
| 924 |
tcon1_in_drc1: endpoint { |
| 925 |
remote-endpoint = <&drc1_out_tcon1>; |
| 926 |
}; |
| 927 |
}; |
| 928 |
|
| 929 |
tcon1_out: port@1 { |
| 930 |
reg = <1>; |
| 931 |
}; |
| 932 |
}; |
| 933 |
}; |
| 934 |
|
| 935 |
ccu: clock@6000000 { |
| 936 |
compatible = "allwinner,sun9i-a80-ccu"; |
| 937 |
reg = <0x06000000 0x800>; |
| 938 |
clocks = <&osc24M>, <&osc32k>; |
| 939 |
clock-names = "hosc", "losc"; |
| 940 |
#clock-cells = <1>; |
| 941 |
#reset-cells = <1>; |
| 942 |
}; |
| 943 |
|
| 944 |
timer@6000c00 { |
| 945 |
compatible = "allwinner,sun4i-a10-timer"; |
| 946 |
reg = <0x06000c00 0xa0>; |
| 947 |
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| 948 |
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| 949 |
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, |
| 950 |
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, |
| 951 |
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, |
| 952 |
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| 953 |
|
| 954 |
clocks = <&osc24M>; |
| 955 |
}; |
| 956 |
|
| 957 |
wdt: watchdog@6000ca0 { |
| 958 |
compatible = "allwinner,sun6i-a31-wdt"; |
| 959 |
reg = <0x06000ca0 0x20>; |
| 960 |
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 961 |
clocks = <&osc24M>; |
| 962 |
}; |
| 963 |
|
| 964 |
pio: pinctrl@6000800 { |
| 965 |
compatible = "allwinner,sun9i-a80-pinctrl"; |
| 966 |
reg = <0x06000800 0x400>; |
| 967 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| 968 |
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, |
| 969 |
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, |
| 970 |
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, |
| 971 |
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; |
| 972 |
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; |
| 973 |
clock-names = "apb", "hosc", "losc"; |
| 974 |
gpio-controller; |
| 975 |
interrupt-controller; |
| 976 |
#interrupt-cells = <3>; |
| 977 |
#gpio-cells = <3>; |
| 978 |
|
| 979 |
gmac_rgmii_pins: gmac-rgmii-pins { |
| 980 |
pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", |
| 981 |
"PA7", "PA8", "PA9", "PA10", "PA12", |
| 982 |
"PA13", "PA15", "PA16", "PA17"; |
| 983 |
function = "gmac"; |
| 984 |
/* |
| 985 |
* data lines in RGMII mode use DDR mode |
| 986 |
* and need a higher signal drive strength |
| 987 |
*/ |
| 988 |
drive-strength = <40>; |
| 989 |
}; |
| 990 |
|
| 991 |
i2c3_pins: i2c3-pins { |
| 992 |
pins = "PG10", "PG11"; |
| 993 |
function = "i2c3"; |
| 994 |
}; |
| 995 |
|
| 996 |
lcd0_rgb888_pins: lcd0-rgb888-pins { |
| 997 |
pins = "PD0", "PD1", "PD2", "PD3", |
| 998 |
"PD4", "PD5", "PD6", "PD7", |
| 999 |
"PD8", "PD9", "PD10", "PD11", |
| 1000 |
"PD12", "PD13", "PD14", "PD15", |
| 1001 |
"PD16", "PD17", "PD18", "PD19", |
| 1002 |
"PD20", "PD21", "PD22", "PD23", |
| 1003 |
"PD24", "PD25", "PD26", "PD27"; |
| 1004 |
function = "lcd0"; |
| 1005 |
}; |
| 1006 |
|
| 1007 |
mmc0_pins: mmc0-pins { |
| 1008 |
pins = "PF0", "PF1" ,"PF2", "PF3", |
| 1009 |
"PF4", "PF5"; |
| 1010 |
function = "mmc0"; |
| 1011 |
drive-strength = <30>; |
| 1012 |
bias-pull-up; |
| 1013 |
}; |
| 1014 |
|
| 1015 |
mmc1_pins: mmc1-pins { |
| 1016 |
pins = "PG0", "PG1" ,"PG2", "PG3", |
| 1017 |
"PG4", "PG5"; |
| 1018 |
function = "mmc1"; |
| 1019 |
drive-strength = <30>; |
| 1020 |
bias-pull-up; |
| 1021 |
}; |
| 1022 |
|
| 1023 |
mmc2_8bit_pins: mmc2-8bit-pins { |
| 1024 |
pins = "PC6", "PC7", "PC8", "PC9", |
| 1025 |
"PC10", "PC11", "PC12", |
| 1026 |
"PC13", "PC14", "PC15", |
| 1027 |
"PC16"; |
| 1028 |
function = "mmc2"; |
| 1029 |
drive-strength = <30>; |
| 1030 |
bias-pull-up; |
| 1031 |
}; |
| 1032 |
|
| 1033 |
uart0_ph_pins: uart0-ph-pins { |
| 1034 |
pins = "PH12", "PH13"; |
| 1035 |
function = "uart0"; |
| 1036 |
}; |
| 1037 |
|
| 1038 |
uart4_pins: uart4-pins { |
| 1039 |
pins = "PG12", "PG13", "PG14", "PG15"; |
| 1040 |
function = "uart4"; |
| 1041 |
}; |
| 1042 |
}; |
| 1043 |
|
| 1044 |
uart0: serial@7000000 { |
| 1045 |
compatible = "snps,dw-apb-uart"; |
| 1046 |
reg = <0x07000000 0x400>; |
| 1047 |
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| 1048 |
reg-shift = <2>; |
| 1049 |
reg-io-width = <4>; |
| 1050 |
clocks = <&ccu CLK_BUS_UART0>; |
| 1051 |
resets = <&ccu RST_BUS_UART0>; |
| 1052 |
status = "disabled"; |
| 1053 |
}; |
| 1054 |
|
| 1055 |
uart1: serial@7000400 { |
| 1056 |
compatible = "snps,dw-apb-uart"; |
| 1057 |
reg = <0x07000400 0x400>; |
| 1058 |
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 1059 |
reg-shift = <2>; |
| 1060 |
reg-io-width = <4>; |
| 1061 |
clocks = <&ccu CLK_BUS_UART1>; |
| 1062 |
resets = <&ccu RST_BUS_UART1>; |
| 1063 |
status = "disabled"; |
| 1064 |
}; |
| 1065 |
|
| 1066 |
uart2: serial@7000800 { |
| 1067 |
compatible = "snps,dw-apb-uart"; |
| 1068 |
reg = <0x07000800 0x400>; |
| 1069 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 1070 |
reg-shift = <2>; |
| 1071 |
reg-io-width = <4>; |
| 1072 |
clocks = <&ccu CLK_BUS_UART2>; |
| 1073 |
resets = <&ccu RST_BUS_UART2>; |
| 1074 |
status = "disabled"; |
| 1075 |
}; |
| 1076 |
|
| 1077 |
uart3: serial@7000c00 { |
| 1078 |
compatible = "snps,dw-apb-uart"; |
| 1079 |
reg = <0x07000c00 0x400>; |
| 1080 |
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 1081 |
reg-shift = <2>; |
| 1082 |
reg-io-width = <4>; |
| 1083 |
clocks = <&ccu CLK_BUS_UART3>; |
| 1084 |
resets = <&ccu RST_BUS_UART3>; |
| 1085 |
status = "disabled"; |
| 1086 |
}; |
| 1087 |
|
| 1088 |
uart4: serial@7001000 { |
| 1089 |
compatible = "snps,dw-apb-uart"; |
| 1090 |
reg = <0x07001000 0x400>; |
| 1091 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 1092 |
reg-shift = <2>; |
| 1093 |
reg-io-width = <4>; |
| 1094 |
clocks = <&ccu CLK_BUS_UART4>; |
| 1095 |
resets = <&ccu RST_BUS_UART4>; |
| 1096 |
status = "disabled"; |
| 1097 |
}; |
| 1098 |
|
| 1099 |
uart5: serial@7001400 { |
| 1100 |
compatible = "snps,dw-apb-uart"; |
| 1101 |
reg = <0x07001400 0x400>; |
| 1102 |
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| 1103 |
reg-shift = <2>; |
| 1104 |
reg-io-width = <4>; |
| 1105 |
clocks = <&ccu CLK_BUS_UART5>; |
| 1106 |
resets = <&ccu RST_BUS_UART5>; |
| 1107 |
status = "disabled"; |
| 1108 |
}; |
| 1109 |
|
| 1110 |
i2c0: i2c@7002800 { |
| 1111 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 1112 |
reg = <0x07002800 0x400>; |
| 1113 |
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 1114 |
clocks = <&ccu CLK_BUS_I2C0>; |
| 1115 |
resets = <&ccu RST_BUS_I2C0>; |
| 1116 |
status = "disabled"; |
| 1117 |
#address-cells = <1>; |
| 1118 |
#size-cells = <0>; |
| 1119 |
}; |
| 1120 |
|
| 1121 |
i2c1: i2c@7002c00 { |
| 1122 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 1123 |
reg = <0x07002c00 0x400>; |
| 1124 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 1125 |
clocks = <&ccu CLK_BUS_I2C1>; |
| 1126 |
resets = <&ccu RST_BUS_I2C1>; |
| 1127 |
status = "disabled"; |
| 1128 |
#address-cells = <1>; |
| 1129 |
#size-cells = <0>; |
| 1130 |
}; |
| 1131 |
|
| 1132 |
i2c2: i2c@7003000 { |
| 1133 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 1134 |
reg = <0x07003000 0x400>; |
| 1135 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| 1136 |
clocks = <&ccu CLK_BUS_I2C2>; |
| 1137 |
resets = <&ccu RST_BUS_I2C2>; |
| 1138 |
status = "disabled"; |
| 1139 |
#address-cells = <1>; |
| 1140 |
#size-cells = <0>; |
| 1141 |
}; |
| 1142 |
|
| 1143 |
i2c3: i2c@7003400 { |
| 1144 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 1145 |
reg = <0x07003400 0x400>; |
| 1146 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 1147 |
clocks = <&ccu CLK_BUS_I2C3>; |
| 1148 |
resets = <&ccu RST_BUS_I2C3>; |
| 1149 |
status = "disabled"; |
| 1150 |
#address-cells = <1>; |
| 1151 |
#size-cells = <0>; |
| 1152 |
}; |
| 1153 |
|
| 1154 |
i2c4: i2c@7003800 { |
| 1155 |
compatible = "allwinner,sun6i-a31-i2c"; |
| 1156 |
reg = <0x07003800 0x400>; |
| 1157 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 1158 |
clocks = <&ccu CLK_BUS_I2C4>; |
| 1159 |
resets = <&ccu RST_BUS_I2C4>; |
| 1160 |
status = "disabled"; |
| 1161 |
#address-cells = <1>; |
| 1162 |
#size-cells = <0>; |
| 1163 |
}; |
| 1164 |
|
| 1165 |
r_wdt: watchdog@8001000 { |
| 1166 |
compatible = "allwinner,sun6i-a31-wdt"; |
| 1167 |
reg = <0x08001000 0x20>; |
| 1168 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 1169 |
clocks = <&osc24M>; |
| 1170 |
}; |
| 1171 |
|
| 1172 |
prcm@8001400 { |
| 1173 |
compatible = "allwinner,sun9i-a80-prcm"; |
| 1174 |
reg = <0x08001400 0x200>; |
| 1175 |
}; |
| 1176 |
|
| 1177 |
apbs_rst: reset@80014b0 { |
| 1178 |
reg = <0x080014b0 0x4>; |
| 1179 |
compatible = "allwinner,sun6i-a31-clock-reset"; |
| 1180 |
#reset-cells = <1>; |
| 1181 |
}; |
| 1182 |
|
| 1183 |
nmi_intc: interrupt-controller@80015a0 { |
| 1184 |
compatible = "allwinner,sun9i-a80-nmi"; |
| 1185 |
interrupt-controller; |
| 1186 |
#interrupt-cells = <2>; |
| 1187 |
reg = <0x080015a0 0xc>; |
| 1188 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 1189 |
}; |
| 1190 |
|
| 1191 |
r_ir: ir@8002000 { |
| 1192 |
compatible = "allwinner,sun6i-a31-ir"; |
| 1193 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 1194 |
pinctrl-names = "default"; |
| 1195 |
pinctrl-0 = <&r_ir_pins>; |
| 1196 |
clocks = <&apbs_gates 1>, <&r_ir_clk>; |
| 1197 |
clock-names = "apb", "ir"; |
| 1198 |
resets = <&apbs_rst 1>; |
| 1199 |
reg = <0x08002000 0x40>; |
| 1200 |
status = "disabled"; |
| 1201 |
}; |
| 1202 |
|
| 1203 |
r_uart: serial@8002800 { |
| 1204 |
compatible = "snps,dw-apb-uart"; |
| 1205 |
reg = <0x08002800 0x400>; |
| 1206 |
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 1207 |
reg-shift = <2>; |
| 1208 |
reg-io-width = <4>; |
| 1209 |
clocks = <&apbs_gates 4>; |
| 1210 |
resets = <&apbs_rst 4>; |
| 1211 |
status = "disabled"; |
| 1212 |
}; |
| 1213 |
|
| 1214 |
r_pio: pinctrl@8002c00 { |
| 1215 |
compatible = "allwinner,sun9i-a80-r-pinctrl"; |
| 1216 |
reg = <0x08002c00 0x400>; |
| 1217 |
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, |
| 1218 |
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| 1219 |
clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>; |
| 1220 |
clock-names = "apb", "hosc", "losc"; |
| 1221 |
gpio-controller; |
| 1222 |
interrupt-controller; |
| 1223 |
#interrupt-cells = <3>; |
| 1224 |
#gpio-cells = <3>; |
| 1225 |
|
| 1226 |
r_ir_pins: r-ir-pins { |
| 1227 |
pins = "PL6"; |
| 1228 |
function = "s_cir_rx"; |
| 1229 |
}; |
| 1230 |
|
| 1231 |
r_rsb_pins: r-rsb-pins { |
| 1232 |
pins = "PN0", "PN1"; |
| 1233 |
function = "s_rsb"; |
| 1234 |
drive-strength = <20>; |
| 1235 |
bias-pull-up; |
| 1236 |
}; |
| 1237 |
}; |
| 1238 |
|
| 1239 |
r_rsb: rsb@8003400 { |
| 1240 |
compatible = "allwinner,sun8i-a23-rsb"; |
| 1241 |
reg = <0x08003400 0x400>; |
| 1242 |
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 1243 |
clocks = <&apbs_gates 3>; |
| 1244 |
clock-frequency = <3000000>; |
| 1245 |
resets = <&apbs_rst 3>; |
| 1246 |
pinctrl-names = "default"; |
| 1247 |
pinctrl-0 = <&r_rsb_pins>; |
| 1248 |
status = "disabled"; |
| 1249 |
#address-cells = <1>; |
| 1250 |
#size-cells = <0>; |
| 1251 |
}; |
| 1252 |
}; |
| 1253 |
}; |