| 1 |
/* |
| 2 |
* Copyright 2013 Oliver Schinagl |
| 3 |
* |
| 4 |
* Oliver Schinagl <[email protected]> |
| 5 |
* |
| 6 |
* This file is dual-licensed: you can use it either under the terms |
| 7 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 8 |
* licensing only applies to this file, and not this project as a |
| 9 |
* whole. |
| 10 |
* |
| 11 |
* a) This file is free software; you can redistribute it and/or |
| 12 |
* modify it under the terms of the GNU General Public License as |
| 13 |
* published by the Free Software Foundation; either version 2 of the |
| 14 |
* License, or (at your option) any later version. |
| 15 |
* |
| 16 |
* This file is distributed in the hope that it will be useful, |
| 17 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 |
* GNU General Public License for more details. |
| 20 |
* |
| 21 |
* Or, alternatively, |
| 22 |
* |
| 23 |
* b) Permission is hereby granted, free of charge, to any person |
| 24 |
* obtaining a copy of this software and associated documentation |
| 25 |
* files (the "Software"), to deal in the Software without |
| 26 |
* restriction, including without limitation the rights to use, |
| 27 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 28 |
* sell copies of the Software, and to permit persons to whom the |
| 29 |
* Software is furnished to do so, subject to the following |
| 30 |
* conditions: |
| 31 |
* |
| 32 |
* The above copyright notice and this permission notice shall be |
| 33 |
* included in all copies or substantial portions of the Software. |
| 34 |
* |
| 35 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 36 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 37 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 38 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 39 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 40 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 41 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 42 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 43 |
*/ |
| 44 |
|
| 45 |
/dts-v1/; |
| 46 |
#include "sun7i-a20.dtsi" |
| 47 |
#include "sunxi-common-regulators.dtsi" |
| 48 |
|
| 49 |
#include <dt-bindings/gpio/gpio.h> |
| 50 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 51 |
|
| 52 |
/ { |
| 53 |
model = "Cubietech Cubietruck"; |
| 54 |
compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; |
| 55 |
|
| 56 |
aliases { |
| 57 |
serial0 = &uart0; |
| 58 |
}; |
| 59 |
|
| 60 |
chosen { |
| 61 |
stdout-path = "serial0:115200n8"; |
| 62 |
}; |
| 63 |
|
| 64 |
hdmi-connector { |
| 65 |
compatible = "hdmi-connector"; |
| 66 |
type = "a"; |
| 67 |
|
| 68 |
port { |
| 69 |
hdmi_con_in: endpoint { |
| 70 |
remote-endpoint = <&hdmi_out_con>; |
| 71 |
}; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
leds { |
| 76 |
compatible = "gpio-leds"; |
| 77 |
|
| 78 |
led-0 { |
| 79 |
label = "cubietruck:blue:usr"; |
| 80 |
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; |
| 81 |
}; |
| 82 |
|
| 83 |
led-1 { |
| 84 |
label = "cubietruck:orange:usr"; |
| 85 |
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; |
| 86 |
}; |
| 87 |
|
| 88 |
led-2 { |
| 89 |
label = "cubietruck:white:usr"; |
| 90 |
gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; |
| 91 |
}; |
| 92 |
|
| 93 |
led-3 { |
| 94 |
label = "cubietruck:green:usr"; |
| 95 |
gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
mmc3_pwrseq: pwrseq { |
| 100 |
compatible = "mmc-pwrseq-simple"; |
| 101 |
reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ |
| 102 |
clocks = <&ccu CLK_OUT_A>; |
| 103 |
clock-names = "ext_clock"; |
| 104 |
}; |
| 105 |
|
| 106 |
sound { |
| 107 |
compatible = "simple-audio-card"; |
| 108 |
simple-audio-card,name = "On-board SPDIF"; |
| 109 |
|
| 110 |
simple-audio-card,cpu { |
| 111 |
sound-dai = <&spdif>; |
| 112 |
}; |
| 113 |
|
| 114 |
simple-audio-card,codec { |
| 115 |
sound-dai = <&spdif_out>; |
| 116 |
}; |
| 117 |
}; |
| 118 |
|
| 119 |
spdif_out: spdif-out { |
| 120 |
#sound-dai-cells = <0>; |
| 121 |
compatible = "linux,spdif-dit"; |
| 122 |
}; |
| 123 |
}; |
| 124 |
|
| 125 |
&ahci { |
| 126 |
target-supply = <®_ahci_5v>; |
| 127 |
status = "okay"; |
| 128 |
}; |
| 129 |
|
| 130 |
&codec { |
| 131 |
status = "okay"; |
| 132 |
}; |
| 133 |
|
| 134 |
&cpu0 { |
| 135 |
cpu-supply = <®_dcdc2>; |
| 136 |
}; |
| 137 |
|
| 138 |
&de { |
| 139 |
status = "okay"; |
| 140 |
}; |
| 141 |
|
| 142 |
&ehci0 { |
| 143 |
status = "okay"; |
| 144 |
}; |
| 145 |
|
| 146 |
&ehci1 { |
| 147 |
status = "okay"; |
| 148 |
}; |
| 149 |
|
| 150 |
&gmac { |
| 151 |
pinctrl-names = "default"; |
| 152 |
pinctrl-0 = <&gmac_rgmii_pins>; |
| 153 |
phy-handle = <&phy1>; |
| 154 |
phy-mode = "rgmii-id"; |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&hdmi { |
| 159 |
status = "okay"; |
| 160 |
}; |
| 161 |
|
| 162 |
&hdmi_out { |
| 163 |
hdmi_out_con: endpoint { |
| 164 |
remote-endpoint = <&hdmi_con_in>; |
| 165 |
}; |
| 166 |
}; |
| 167 |
|
| 168 |
&i2c0 { |
| 169 |
status = "okay"; |
| 170 |
|
| 171 |
axp209: pmic@34 { |
| 172 |
reg = <0x34>; |
| 173 |
interrupt-parent = <&nmi_intc>; |
| 174 |
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 175 |
}; |
| 176 |
}; |
| 177 |
|
| 178 |
&i2c1 { |
| 179 |
pinctrl-names = "default"; |
| 180 |
status = "okay"; |
| 181 |
}; |
| 182 |
|
| 183 |
&i2c2 { |
| 184 |
status = "okay"; |
| 185 |
}; |
| 186 |
|
| 187 |
&ir0 { |
| 188 |
pinctrl-names = "default"; |
| 189 |
pinctrl-0 = <&ir0_rx_pin>; |
| 190 |
status = "okay"; |
| 191 |
}; |
| 192 |
|
| 193 |
&gmac_mdio { |
| 194 |
phy1: ethernet-phy@1 { |
| 195 |
reg = <1>; |
| 196 |
}; |
| 197 |
}; |
| 198 |
|
| 199 |
&mmc0 { |
| 200 |
vmmc-supply = <®_vcc3v3>; |
| 201 |
bus-width = <4>; |
| 202 |
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ |
| 203 |
status = "okay"; |
| 204 |
}; |
| 205 |
|
| 206 |
&mmc3 { |
| 207 |
vmmc-supply = <®_vcc3v3>; |
| 208 |
mmc-pwrseq = <&mmc3_pwrseq>; |
| 209 |
bus-width = <4>; |
| 210 |
non-removable; |
| 211 |
status = "okay"; |
| 212 |
|
| 213 |
brcmf: wifi@1 { |
| 214 |
reg = <1>; |
| 215 |
compatible = "brcm,bcm4329-fmac"; |
| 216 |
interrupt-parent = <&pio>; |
| 217 |
interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ |
| 218 |
interrupt-names = "host-wake"; |
| 219 |
}; |
| 220 |
}; |
| 221 |
|
| 222 |
&ohci0 { |
| 223 |
status = "okay"; |
| 224 |
}; |
| 225 |
|
| 226 |
&ohci1 { |
| 227 |
status = "okay"; |
| 228 |
}; |
| 229 |
|
| 230 |
&otg_sram { |
| 231 |
status = "okay"; |
| 232 |
}; |
| 233 |
|
| 234 |
&pio { |
| 235 |
/* Pin outputs low power clock for WiFi and BT */ |
| 236 |
pinctrl-0 = <&clk_out_a_pin>; |
| 237 |
pinctrl-names = "default"; |
| 238 |
}; |
| 239 |
|
| 240 |
&pwm { |
| 241 |
pinctrl-names = "default"; |
| 242 |
pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>; |
| 243 |
status = "okay"; |
| 244 |
}; |
| 245 |
|
| 246 |
®_ahci_5v { |
| 247 |
gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; |
| 248 |
status = "okay"; |
| 249 |
}; |
| 250 |
|
| 251 |
#include "axp209.dtsi" |
| 252 |
|
| 253 |
&ac_power_supply { |
| 254 |
status = "okay"; |
| 255 |
}; |
| 256 |
|
| 257 |
&battery_power_supply { |
| 258 |
status = "okay"; |
| 259 |
}; |
| 260 |
|
| 261 |
®_dcdc2 { |
| 262 |
regulator-always-on; |
| 263 |
regulator-min-microvolt = <1000000>; |
| 264 |
regulator-max-microvolt = <1450000>; |
| 265 |
regulator-name = "vdd-cpu"; |
| 266 |
}; |
| 267 |
|
| 268 |
®_dcdc3 { |
| 269 |
regulator-always-on; |
| 270 |
regulator-min-microvolt = <1000000>; |
| 271 |
regulator-max-microvolt = <1400000>; |
| 272 |
regulator-name = "vdd-int-dll"; |
| 273 |
}; |
| 274 |
|
| 275 |
®_ldo1 { |
| 276 |
regulator-name = "vdd-rtc"; |
| 277 |
}; |
| 278 |
|
| 279 |
®_ldo2 { |
| 280 |
regulator-always-on; |
| 281 |
regulator-min-microvolt = <3000000>; |
| 282 |
regulator-max-microvolt = <3000000>; |
| 283 |
regulator-name = "avcc"; |
| 284 |
}; |
| 285 |
|
| 286 |
®_usb0_vbus { |
| 287 |
gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; |
| 288 |
status = "okay"; |
| 289 |
}; |
| 290 |
|
| 291 |
®_usb1_vbus { |
| 292 |
status = "okay"; |
| 293 |
}; |
| 294 |
|
| 295 |
®_usb2_vbus { |
| 296 |
status = "okay"; |
| 297 |
}; |
| 298 |
|
| 299 |
&spdif { |
| 300 |
pinctrl-names = "default"; |
| 301 |
pinctrl-0 = <&spdif_tx_pin>; |
| 302 |
status = "okay"; |
| 303 |
}; |
| 304 |
|
| 305 |
&uart0 { |
| 306 |
pinctrl-names = "default"; |
| 307 |
pinctrl-0 = <&uart0_pb_pins>; |
| 308 |
status = "okay"; |
| 309 |
}; |
| 310 |
|
| 311 |
&uart2 { |
| 312 |
pinctrl-names = "default"; |
| 313 |
pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>; |
| 314 |
uart-has-rtscts; |
| 315 |
status = "okay"; |
| 316 |
|
| 317 |
bluetooth { |
| 318 |
compatible = "brcm,bcm20702a1"; |
| 319 |
clocks = <&ccu CLK_OUT_A>; |
| 320 |
clock-names = "lpo"; |
| 321 |
device-wakeup-gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */ |
| 322 |
host-wakeup-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */ |
| 323 |
shutdown-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ |
| 324 |
max-speed = <1500000>; |
| 325 |
}; |
| 326 |
}; |
| 327 |
|
| 328 |
&usb_otg { |
| 329 |
dr_mode = "otg"; |
| 330 |
status = "okay"; |
| 331 |
}; |
| 332 |
|
| 333 |
&usb_power_supply { |
| 334 |
status = "okay"; |
| 335 |
}; |
| 336 |
|
| 337 |
&usbphy { |
| 338 |
usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ |
| 339 |
usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ |
| 340 |
usb0_vbus_power-supply = <&usb_power_supply>; |
| 341 |
usb0_vbus-supply = <®_usb0_vbus>; |
| 342 |
usb1_vbus-supply = <®_usb1_vbus>; |
| 343 |
usb2_vbus-supply = <®_usb2_vbus>; |
| 344 |
status = "okay"; |
| 345 |
}; |