| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* Copyright 2020 Pascal Roeleven <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include "sun4i-a10.dtsi" |
| 8 |
#include "sunxi-common-regulators.dtsi" |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/input/input.h> |
| 12 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 13 |
#include <dt-bindings/pwm/pwm.h> |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Topwise A721"; |
| 17 |
compatible = "topwise,a721", "allwinner,sun4i-a10"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
serial0 = &uart0; |
| 21 |
}; |
| 22 |
|
| 23 |
backlight: backlight { |
| 24 |
compatible = "pwm-backlight"; |
| 25 |
pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>; |
| 26 |
power-supply = <®_vbat>; |
| 27 |
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ |
| 28 |
brightness-levels = <0 30 40 50 60 70 80 90 100>; |
| 29 |
default-brightness-level = <8>; |
| 30 |
}; |
| 31 |
|
| 32 |
chosen { |
| 33 |
stdout-path = "serial0:115200n8"; |
| 34 |
}; |
| 35 |
|
| 36 |
panel { |
| 37 |
compatible = "starry,kr070pe2t"; |
| 38 |
backlight = <&backlight>; |
| 39 |
power-supply = <®_lcd_power>; |
| 40 |
|
| 41 |
port { |
| 42 |
panel_input: endpoint { |
| 43 |
remote-endpoint = <&tcon0_out_panel>; |
| 44 |
}; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
reg_lcd_power: reg-lcd-power { |
| 49 |
compatible = "regulator-fixed"; |
| 50 |
regulator-name = "reg-lcd-power"; |
| 51 |
gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ |
| 52 |
enable-active-high; |
| 53 |
}; |
| 54 |
|
| 55 |
reg_vbat: reg-vbat { |
| 56 |
compatible = "regulator-fixed"; |
| 57 |
regulator-name = "vbat"; |
| 58 |
regulator-min-microvolt = <3700000>; |
| 59 |
regulator-max-microvolt = <3700000>; |
| 60 |
}; |
| 61 |
|
| 62 |
}; |
| 63 |
|
| 64 |
&codec { |
| 65 |
status = "okay"; |
| 66 |
}; |
| 67 |
|
| 68 |
&cpu0 { |
| 69 |
cpu-supply = <®_dcdc2>; |
| 70 |
}; |
| 71 |
|
| 72 |
&de { |
| 73 |
status = "okay"; |
| 74 |
}; |
| 75 |
|
| 76 |
&ehci0 { |
| 77 |
status = "okay"; |
| 78 |
}; |
| 79 |
|
| 80 |
&ehci1 { |
| 81 |
status = "okay"; |
| 82 |
}; |
| 83 |
|
| 84 |
&i2c0 { |
| 85 |
status = "okay"; |
| 86 |
|
| 87 |
axp209: pmic@34 { |
| 88 |
reg = <0x34>; |
| 89 |
interrupts = <0>; |
| 90 |
}; |
| 91 |
}; |
| 92 |
|
| 93 |
#include "axp209.dtsi" |
| 94 |
|
| 95 |
&ac_power_supply { |
| 96 |
status = "okay"; |
| 97 |
}; |
| 98 |
|
| 99 |
&battery_power_supply { |
| 100 |
status = "okay"; |
| 101 |
}; |
| 102 |
|
| 103 |
&i2c1 { |
| 104 |
status = "okay"; |
| 105 |
|
| 106 |
accelerometer@4c { |
| 107 |
compatible = "fsl,mma7660"; |
| 108 |
reg = <0x4c>; |
| 109 |
}; |
| 110 |
}; |
| 111 |
|
| 112 |
&i2c2 { |
| 113 |
status = "okay"; |
| 114 |
|
| 115 |
touchscreen@38 { |
| 116 |
compatible = "edt,edt-ft5406"; |
| 117 |
reg = <0x38>; |
| 118 |
interrupt-parent = <&pio>; |
| 119 |
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; |
| 120 |
touchscreen-size-x = <800>; |
| 121 |
touchscreen-size-y = <480>; |
| 122 |
vcc-supply = <®_vcc3v3>; |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
&lradc { |
| 127 |
vref-supply = <®_ldo2>; |
| 128 |
status = "okay"; |
| 129 |
|
| 130 |
button-571 { |
| 131 |
label = "Volume Up"; |
| 132 |
linux,code = <KEY_VOLUMEUP>; |
| 133 |
channel = <0>; |
| 134 |
voltage = <571428>; |
| 135 |
}; |
| 136 |
|
| 137 |
button-761 { |
| 138 |
label = "Volume Down"; |
| 139 |
linux,code = <KEY_VOLUMEDOWN>; |
| 140 |
channel = <0>; |
| 141 |
voltage = <761904>; |
| 142 |
}; |
| 143 |
}; |
| 144 |
|
| 145 |
&mmc0 { |
| 146 |
vmmc-supply = <®_vcc3v3>; |
| 147 |
bus-width = <4>; |
| 148 |
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */ |
| 149 |
status = "okay"; |
| 150 |
}; |
| 151 |
|
| 152 |
&ohci0 { |
| 153 |
status = "okay"; |
| 154 |
}; |
| 155 |
|
| 156 |
&ohci1 { |
| 157 |
status = "okay"; |
| 158 |
}; |
| 159 |
|
| 160 |
&otg_sram { |
| 161 |
status = "okay"; |
| 162 |
}; |
| 163 |
|
| 164 |
&pio { |
| 165 |
vcc-pb-supply = <®_vcc3v3>; |
| 166 |
vcc-pf-supply = <®_vcc3v3>; |
| 167 |
vcc-ph-supply = <®_vcc3v3>; |
| 168 |
}; |
| 169 |
|
| 170 |
&pwm { |
| 171 |
pinctrl-names = "default"; |
| 172 |
pinctrl-0 = <&pwm0_pin>; |
| 173 |
status = "okay"; |
| 174 |
}; |
| 175 |
|
| 176 |
®_dcdc2 { |
| 177 |
regulator-always-on; |
| 178 |
regulator-min-microvolt = <1000000>; |
| 179 |
regulator-max-microvolt = <1400000>; |
| 180 |
regulator-name = "vdd-cpu"; |
| 181 |
}; |
| 182 |
|
| 183 |
®_dcdc3 { |
| 184 |
regulator-always-on; |
| 185 |
regulator-min-microvolt = <1250000>; |
| 186 |
regulator-max-microvolt = <1250000>; |
| 187 |
regulator-name = "vdd-int-dll"; |
| 188 |
}; |
| 189 |
|
| 190 |
®_ldo1 { |
| 191 |
regulator-name = "vdd-rtc"; |
| 192 |
}; |
| 193 |
|
| 194 |
®_ldo2 { |
| 195 |
regulator-always-on; |
| 196 |
regulator-min-microvolt = <3000000>; |
| 197 |
regulator-max-microvolt = <3000000>; |
| 198 |
regulator-name = "avcc"; |
| 199 |
}; |
| 200 |
|
| 201 |
®_usb0_vbus { |
| 202 |
status = "okay"; |
| 203 |
}; |
| 204 |
|
| 205 |
®_usb1_vbus { |
| 206 |
status = "okay"; |
| 207 |
}; |
| 208 |
|
| 209 |
®_usb2_vbus { |
| 210 |
status = "okay"; |
| 211 |
}; |
| 212 |
|
| 213 |
&tcon0_out { |
| 214 |
tcon0_out_panel: endpoint@0 { |
| 215 |
reg = <0>; |
| 216 |
remote-endpoint = <&panel_input>; |
| 217 |
}; |
| 218 |
}; |
| 219 |
|
| 220 |
&uart0 { |
| 221 |
pinctrl-names = "default"; |
| 222 |
pinctrl-0 = <&uart0_pb_pins>; |
| 223 |
status = "okay"; |
| 224 |
}; |
| 225 |
|
| 226 |
&usb_otg { |
| 227 |
dr_mode = "otg"; |
| 228 |
status = "okay"; |
| 229 |
}; |
| 230 |
|
| 231 |
&usb_power_supply { |
| 232 |
status = "okay"; |
| 233 |
}; |
| 234 |
|
| 235 |
&usbphy { |
| 236 |
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ |
| 237 |
usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ |
| 238 |
usb0_vbus-supply = <®_usb0_vbus>; |
| 239 |
usb1_vbus-supply = <®_usb1_vbus>; |
| 240 |
usb2_vbus-supply = <®_usb2_vbus>; |
| 241 |
status = "okay"; |
| 242 |
}; |