| 1 |
/* |
| 2 |
* Copyright (C) 2016 Icenowy Zheng <[email protected]> |
| 3 |
* |
| 4 |
* Based on sun8i-h3-orangepi-one.dts, which is: |
| 5 |
* Copyright (C) 2016 Hans de Goede <[email protected]> |
| 6 |
* |
| 7 |
* This file is dual-licensed: you can use it either under the terms |
| 8 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 9 |
* licensing only applies to this file, and not this project as a |
| 10 |
* whole. |
| 11 |
* |
| 12 |
* a) This file is free software; you can redistribute it and/or |
| 13 |
* modify it under the terms of the GNU General Public License as |
| 14 |
* published by the Free Software Foundation; either version 2 of the |
| 15 |
* License, or (at your option) any later version. |
| 16 |
* |
| 17 |
* This file is distributed in the hope that it will be useful, |
| 18 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 19 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 20 |
* GNU General Public License for more details. |
| 21 |
* |
| 22 |
* Or, alternatively, |
| 23 |
* |
| 24 |
* b) Permission is hereby granted, free of charge, to any person |
| 25 |
* obtaining a copy of this software and associated documentation |
| 26 |
* files (the "Software"), to deal in the Software without |
| 27 |
* restriction, including without limitation the rights to use, |
| 28 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 29 |
* sell copies of the Software, and to permit persons to whom the |
| 30 |
* Software is furnished to do so, subject to the following |
| 31 |
* conditions: |
| 32 |
* |
| 33 |
* The above copyright notice and this permission notice shall be |
| 34 |
* included in all copies or substantial portions of the Software. |
| 35 |
* |
| 36 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 37 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 38 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 39 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 40 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 41 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 42 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 43 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 44 |
*/ |
| 45 |
|
| 46 |
/dts-v1/; |
| 47 |
#include "sun8i-h3.dtsi" |
| 48 |
#include "sunxi-common-regulators.dtsi" |
| 49 |
|
| 50 |
#include <dt-bindings/gpio/gpio.h> |
| 51 |
#include <dt-bindings/input/input.h> |
| 52 |
|
| 53 |
/ { |
| 54 |
model = "Xunlong Orange Pi Zero"; |
| 55 |
compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus"; |
| 56 |
|
| 57 |
aliases { |
| 58 |
serial0 = &uart0; |
| 59 |
/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ |
| 60 |
ethernet0 = &emac; |
| 61 |
ethernet1 = &xr819; |
| 62 |
}; |
| 63 |
|
| 64 |
chosen { |
| 65 |
stdout-path = "serial0:115200n8"; |
| 66 |
}; |
| 67 |
|
| 68 |
leds { |
| 69 |
compatible = "gpio-leds"; |
| 70 |
|
| 71 |
pwr_led { |
| 72 |
label = "orangepi:green:pwr"; |
| 73 |
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; |
| 74 |
default-state = "on"; |
| 75 |
}; |
| 76 |
|
| 77 |
status_led { |
| 78 |
label = "orangepi:red:status"; |
| 79 |
gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; |
| 80 |
}; |
| 81 |
}; |
| 82 |
|
| 83 |
reg_vcc_wifi: reg-vcc-wifi { |
| 84 |
compatible = "regulator-fixed"; |
| 85 |
regulator-min-microvolt = <3300000>; |
| 86 |
regulator-max-microvolt = <3300000>; |
| 87 |
regulator-name = "vcc-wifi"; |
| 88 |
enable-active-high; |
| 89 |
gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; |
| 90 |
}; |
| 91 |
|
| 92 |
reg_vdd_cpux: vdd-cpux-regulator { |
| 93 |
compatible = "regulator-gpio"; |
| 94 |
regulator-name = "vdd-cpux"; |
| 95 |
regulator-type = "voltage"; |
| 96 |
regulator-boot-on; |
| 97 |
regulator-always-on; |
| 98 |
regulator-min-microvolt = <1100000>; |
| 99 |
regulator-max-microvolt = <1300000>; |
| 100 |
regulator-ramp-delay = <50>; /* 4ms */ |
| 101 |
|
| 102 |
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ |
| 103 |
enable-active-high; |
| 104 |
gpios-states = <1>; |
| 105 |
states = <1100000 0>, <1300000 1>; |
| 106 |
}; |
| 107 |
|
| 108 |
wifi_pwrseq: pwrseq { |
| 109 |
compatible = "mmc-pwrseq-simple"; |
| 110 |
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; |
| 111 |
post-power-on-delay-ms = <200>; |
| 112 |
}; |
| 113 |
}; |
| 114 |
|
| 115 |
/* |
| 116 |
* Audio input/output is exposed on the 13-pin header and can't be used for |
| 117 |
* anything else. However, adapter boards may use different audio routing. |
| 118 |
* - https://linux-sunxi.org/Xunlong_Orange_Pi_Zero#Expansion_Port |
| 119 |
* - Allwinner H3 Datasheet, section 3.1. Pin Characteristics |
| 120 |
*/ |
| 121 |
&codec { |
| 122 |
allwinner,audio-routing = |
| 123 |
"Line Out", "LINEOUT", |
| 124 |
"MIC1", "Mic", |
| 125 |
"Mic", "MBIAS"; |
| 126 |
status = "disabled"; |
| 127 |
}; |
| 128 |
|
| 129 |
&cpu0 { |
| 130 |
cpu-supply = <®_vdd_cpux>; |
| 131 |
}; |
| 132 |
|
| 133 |
&ehci0 { |
| 134 |
status = "okay"; |
| 135 |
}; |
| 136 |
|
| 137 |
&ehci1 { |
| 138 |
status = "okay"; |
| 139 |
}; |
| 140 |
|
| 141 |
&emac { |
| 142 |
phy-handle = <&int_mii_phy>; |
| 143 |
phy-mode = "mii"; |
| 144 |
allwinner,leds-active-low; |
| 145 |
status = "okay"; |
| 146 |
}; |
| 147 |
|
| 148 |
&mmc0 { |
| 149 |
vmmc-supply = <®_vcc3v3>; |
| 150 |
bus-width = <4>; |
| 151 |
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
| 152 |
status = "okay"; |
| 153 |
}; |
| 154 |
|
| 155 |
&mmc1 { |
| 156 |
vmmc-supply = <®_vcc_wifi>; |
| 157 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 158 |
bus-width = <4>; |
| 159 |
non-removable; |
| 160 |
status = "okay"; |
| 161 |
|
| 162 |
/* |
| 163 |
* Explicitly define the sdio device, so that we can add an ethernet |
| 164 |
* alias for it (which e.g. makes u-boot set a mac-address). |
| 165 |
*/ |
| 166 |
xr819: wifi@1 { |
| 167 |
reg = <1>; |
| 168 |
}; |
| 169 |
}; |
| 170 |
|
| 171 |
&ohci0 { |
| 172 |
status = "okay"; |
| 173 |
}; |
| 174 |
|
| 175 |
&ohci1 { |
| 176 |
status = "okay"; |
| 177 |
}; |
| 178 |
|
| 179 |
&spi0 { |
| 180 |
/* Disable SPI NOR by default: it optional on Orange Pi Zero boards */ |
| 181 |
status = "disabled"; |
| 182 |
|
| 183 |
flash@0 { |
| 184 |
#address-cells = <1>; |
| 185 |
#size-cells = <1>; |
| 186 |
compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; |
| 187 |
reg = <0>; |
| 188 |
spi-max-frequency = <40000000>; |
| 189 |
}; |
| 190 |
}; |
| 191 |
|
| 192 |
&uart0 { |
| 193 |
pinctrl-names = "default"; |
| 194 |
pinctrl-0 = <&uart0_pa_pins>; |
| 195 |
status = "okay"; |
| 196 |
}; |
| 197 |
|
| 198 |
&uart1 { |
| 199 |
pinctrl-names = "default"; |
| 200 |
pinctrl-0 = <&uart1_pins>; |
| 201 |
status = "disabled"; |
| 202 |
}; |
| 203 |
|
| 204 |
&uart2 { |
| 205 |
pinctrl-names = "default"; |
| 206 |
pinctrl-0 = <&uart2_pins>; |
| 207 |
status = "disabled"; |
| 208 |
}; |
| 209 |
|
| 210 |
&usb_otg { |
| 211 |
dr_mode = "peripheral"; |
| 212 |
status = "okay"; |
| 213 |
}; |
| 214 |
|
| 215 |
&usbphy { |
| 216 |
/* |
| 217 |
* USB Type-A port VBUS is always on. However, MicroUSB VBUS can only |
| 218 |
* power up the board; when it's used as OTG port, this VBUS is |
| 219 |
* always off even if the board is powered via GPIO pins. |
| 220 |
*/ |
| 221 |
status = "okay"; |
| 222 |
usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ |
| 223 |
}; |