| 1 |
/* |
| 2 |
* Copyright 2014 Chen-Yu Tsai |
| 3 |
* |
| 4 |
* Chen-Yu Tsai <[email protected]> |
| 5 |
* |
| 6 |
* This file is dual-licensed: you can use it either under the terms |
| 7 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 8 |
* licensing only applies to this file, and not this project as a |
| 9 |
* whole. |
| 10 |
* |
| 11 |
* a) This file is free software; you can redistribute it and/or |
| 12 |
* modify it under the terms of the GNU General Public License as |
| 13 |
* published by the Free Software Foundation; either version 2 of the |
| 14 |
* License, or (at your option) any later version. |
| 15 |
* |
| 16 |
* This file is distributed in the hope that it will be useful, |
| 17 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 |
* GNU General Public License for more details. |
| 20 |
* |
| 21 |
* Or, alternatively, |
| 22 |
* |
| 23 |
* b) Permission is hereby granted, free of charge, to any person |
| 24 |
* obtaining a copy of this software and associated documentation |
| 25 |
* files (the "Software"), to deal in the Software without |
| 26 |
* restriction, including without limitation the rights to use, |
| 27 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 28 |
* sell copies of the Software, and to permit persons to whom the |
| 29 |
* Software is furnished to do so, subject to the following |
| 30 |
* conditions: |
| 31 |
* |
| 32 |
* The above copyright notice and this permission notice shall be |
| 33 |
* included in all copies or substantial portions of the Software. |
| 34 |
* |
| 35 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 36 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 37 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 38 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 39 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 40 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 41 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 42 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 43 |
*/ |
| 44 |
|
| 45 |
/dts-v1/; |
| 46 |
#include "sun9i-a80.dtsi" |
| 47 |
|
| 48 |
#include <dt-bindings/gpio/gpio.h> |
| 49 |
|
| 50 |
/ { |
| 51 |
model = "Merrii A80 Optimus Board"; |
| 52 |
compatible = "merrii,a80-optimus", "allwinner,sun9i-a80"; |
| 53 |
|
| 54 |
aliases { |
| 55 |
serial0 = &uart0; |
| 56 |
serial1 = &uart4; |
| 57 |
}; |
| 58 |
|
| 59 |
chosen { |
| 60 |
stdout-path = "serial0:115200n8"; |
| 61 |
}; |
| 62 |
|
| 63 |
leds { |
| 64 |
compatible = "gpio-leds"; |
| 65 |
|
| 66 |
/* The LED names match those found on the board */ |
| 67 |
led2 { |
| 68 |
label = "optimus:led2:usr"; |
| 69 |
gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; |
| 70 |
}; |
| 71 |
|
| 72 |
led3 { |
| 73 |
label = "optimus:led3:usr"; |
| 74 |
gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */ |
| 75 |
}; |
| 76 |
|
| 77 |
led4 { |
| 78 |
label = "optimus:led4:usr"; |
| 79 |
gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; |
| 80 |
}; |
| 81 |
}; |
| 82 |
|
| 83 |
reg_usb1_vbus: usb1-vbus { |
| 84 |
compatible = "regulator-fixed"; |
| 85 |
regulator-name = "usb1-vbus"; |
| 86 |
regulator-min-microvolt = <5000000>; |
| 87 |
regulator-max-microvolt = <5000000>; |
| 88 |
enable-active-high; |
| 89 |
gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ |
| 90 |
}; |
| 91 |
|
| 92 |
reg_usb3_vbus: usb3-vbus { |
| 93 |
compatible = "regulator-fixed"; |
| 94 |
regulator-name = "usb3-vbus"; |
| 95 |
regulator-min-microvolt = <5000000>; |
| 96 |
regulator-max-microvolt = <5000000>; |
| 97 |
enable-active-high; |
| 98 |
gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ |
| 99 |
}; |
| 100 |
|
| 101 |
wifi_pwrseq: wifi-pwrseq { |
| 102 |
compatible = "mmc-pwrseq-simple"; |
| 103 |
clocks = <&ac100_rtc 1>; |
| 104 |
clock-names = "ext_clock"; |
| 105 |
/* enables internal regulator and de-asserts reset */ |
| 106 |
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ |
| 107 |
}; |
| 108 |
}; |
| 109 |
|
| 110 |
&ehci0 { |
| 111 |
status = "okay"; |
| 112 |
}; |
| 113 |
|
| 114 |
&ehci1 { |
| 115 |
/* Enable if HSIC peripheral is connected */ |
| 116 |
status = "disabled"; |
| 117 |
}; |
| 118 |
|
| 119 |
&ehci2 { |
| 120 |
status = "okay"; |
| 121 |
}; |
| 122 |
|
| 123 |
&gmac { |
| 124 |
pinctrl-names = "default"; |
| 125 |
pinctrl-0 = <&gmac_rgmii_pins>; |
| 126 |
phy-handle = <&phy1>; |
| 127 |
phy-mode = "rgmii-id"; |
| 128 |
phy-supply = <®_cldo1>; |
| 129 |
status = "okay"; |
| 130 |
}; |
| 131 |
|
| 132 |
&mdio { |
| 133 |
phy1: ethernet-phy@1 { |
| 134 |
reg = <1>; |
| 135 |
}; |
| 136 |
}; |
| 137 |
|
| 138 |
&mmc0 { |
| 139 |
pinctrl-names = "default"; |
| 140 |
pinctrl-0 = <&mmc0_pins>; |
| 141 |
vmmc-supply = <®_dcdc1>; |
| 142 |
bus-width = <4>; |
| 143 |
cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH8 */ |
| 144 |
status = "okay"; |
| 145 |
}; |
| 146 |
|
| 147 |
&mmc1 { |
| 148 |
pinctrl-names = "default"; |
| 149 |
pinctrl-0 = <&mmc1_pins>; |
| 150 |
vmmc-supply = <®_dldo1>; |
| 151 |
vqmmc-supply = <®_cldo3>; |
| 152 |
mmc-pwrseq = <&wifi_pwrseq>; |
| 153 |
bus-width = <4>; |
| 154 |
non-removable; |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&mmc1_pins { |
| 159 |
bias-pull-up; |
| 160 |
}; |
| 161 |
|
| 162 |
&mmc2 { |
| 163 |
pinctrl-names = "default"; |
| 164 |
pinctrl-0 = <&mmc2_8bit_pins>; |
| 165 |
vmmc-supply = <®_dcdc1>; |
| 166 |
bus-width = <8>; |
| 167 |
non-removable; |
| 168 |
cap-mmc-hw-reset; |
| 169 |
status = "okay"; |
| 170 |
}; |
| 171 |
|
| 172 |
&mmc2_8bit_pins { |
| 173 |
/* Increase drive strength for DDR modes */ |
| 174 |
drive-strength = <40>; |
| 175 |
}; |
| 176 |
|
| 177 |
&ohci0 { |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
&ohci2 { |
| 182 |
status = "okay"; |
| 183 |
}; |
| 184 |
|
| 185 |
&osc32k { |
| 186 |
/* osc32k input is from AC100 */ |
| 187 |
clocks = <&ac100_rtc 0>; |
| 188 |
}; |
| 189 |
|
| 190 |
&pio { |
| 191 |
vcc-pa-supply = <®_ldo_io1>; |
| 192 |
vcc-pb-supply = <®_aldo2>; |
| 193 |
vcc-pc-supply = <®_dcdc1>; |
| 194 |
vcc-pd-supply = <®_dcdc1>; |
| 195 |
vcc-pe-supply = <®_eldo2>; |
| 196 |
vcc-pf-supply = <®_dcdc1>; |
| 197 |
vcc-pg-supply = <®_ldo_io0>; |
| 198 |
vcc-ph-supply = <®_dcdc1>; |
| 199 |
}; |
| 200 |
|
| 201 |
&r_ir { |
| 202 |
status = "okay"; |
| 203 |
}; |
| 204 |
|
| 205 |
&r_pio { |
| 206 |
vcc-pl-supply = <®_dldo2>; |
| 207 |
vcc-pm-supply = <®_eldo3>; |
| 208 |
}; |
| 209 |
|
| 210 |
&r_rsb { |
| 211 |
status = "okay"; |
| 212 |
|
| 213 |
axp809: pmic@3a3 { |
| 214 |
reg = <0x3a3>; |
| 215 |
interrupt-parent = <&nmi_intc>; |
| 216 |
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 217 |
|
| 218 |
regulators { |
| 219 |
reg_aldo1: aldo1 { |
| 220 |
/* |
| 221 |
* TODO: This should be handled by the |
| 222 |
* USB PHY driver. |
| 223 |
*/ |
| 224 |
regulator-always-on; |
| 225 |
regulator-min-microvolt = <3000000>; |
| 226 |
regulator-max-microvolt = <3000000>; |
| 227 |
regulator-name = "vcc33-usbh"; |
| 228 |
}; |
| 229 |
|
| 230 |
reg_aldo2: aldo2 { |
| 231 |
regulator-min-microvolt = <1800000>; |
| 232 |
regulator-max-microvolt = <1800000>; |
| 233 |
regulator-name = "vcc-pb-io-cam"; |
| 234 |
}; |
| 235 |
|
| 236 |
aldo3 { |
| 237 |
/* unused */ |
| 238 |
}; |
| 239 |
|
| 240 |
reg_dc5ldo: dc5ldo { |
| 241 |
regulator-always-on; |
| 242 |
regulator-min-microvolt = <800000>; |
| 243 |
regulator-max-microvolt = <1100000>; |
| 244 |
regulator-name = "vdd-cpus-09-usbh"; |
| 245 |
}; |
| 246 |
|
| 247 |
dc1sw { |
| 248 |
/* unused */ |
| 249 |
}; |
| 250 |
|
| 251 |
reg_dcdc1: dcdc1 { |
| 252 |
regulator-always-on; |
| 253 |
regulator-min-microvolt = <3000000>; |
| 254 |
regulator-max-microvolt = <3000000>; |
| 255 |
regulator-name = "vcc-3v"; |
| 256 |
}; |
| 257 |
|
| 258 |
reg_dcdc2: dcdc2 { |
| 259 |
regulator-min-microvolt = <800000>; |
| 260 |
regulator-max-microvolt = <1100000>; |
| 261 |
regulator-name = "vdd-gpu"; |
| 262 |
}; |
| 263 |
|
| 264 |
reg_dcdc3: dcdc3 { |
| 265 |
regulator-always-on; |
| 266 |
regulator-min-microvolt = <800000>; |
| 267 |
regulator-max-microvolt = <1100000>; |
| 268 |
regulator-name = "vdd-cpua"; |
| 269 |
}; |
| 270 |
|
| 271 |
reg_dcdc4: dcdc4 { |
| 272 |
regulator-always-on; |
| 273 |
regulator-min-microvolt = <800000>; |
| 274 |
regulator-max-microvolt = <1100000>; |
| 275 |
regulator-name = "vdd-sys-usb0-hdmi"; |
| 276 |
}; |
| 277 |
|
| 278 |
reg_dcdc5: dcdc5 { |
| 279 |
regulator-always-on; |
| 280 |
regulator-min-microvolt = <1425000>; |
| 281 |
regulator-max-microvolt = <1575000>; |
| 282 |
regulator-name = "vcc-dram"; |
| 283 |
}; |
| 284 |
|
| 285 |
reg_dldo1: dldo1 { |
| 286 |
/* |
| 287 |
* The WiFi chip supports a wide range |
| 288 |
* (3.0 ~ 4.8V) of voltages, and so does |
| 289 |
* this regulator (3.0 ~ 4.2V), but |
| 290 |
* Allwinner SDK always sets it to 3.3V. |
| 291 |
*/ |
| 292 |
regulator-min-microvolt = <3300000>; |
| 293 |
regulator-max-microvolt = <3300000>; |
| 294 |
regulator-name = "vcc-wifi"; |
| 295 |
}; |
| 296 |
|
| 297 |
reg_dldo2: dldo2 { |
| 298 |
regulator-min-microvolt = <3000000>; |
| 299 |
regulator-max-microvolt = <3000000>; |
| 300 |
regulator-name = "vcc-pl"; |
| 301 |
}; |
| 302 |
|
| 303 |
reg_eldo1: eldo1 { |
| 304 |
regulator-min-microvolt = <1200000>; |
| 305 |
regulator-max-microvolt = <1200000>; |
| 306 |
regulator-name = "vcc-dvdd-cam"; |
| 307 |
}; |
| 308 |
|
| 309 |
reg_eldo2: eldo2 { |
| 310 |
regulator-min-microvolt = <1800000>; |
| 311 |
regulator-max-microvolt = <1800000>; |
| 312 |
regulator-name = "vcc-pe"; |
| 313 |
}; |
| 314 |
|
| 315 |
reg_eldo3: eldo3 { |
| 316 |
regulator-min-microvolt = <3000000>; |
| 317 |
regulator-max-microvolt = <3000000>; |
| 318 |
regulator-name = "vcc-pm-codec-io1"; |
| 319 |
}; |
| 320 |
|
| 321 |
reg_ldo_io0: ldo_io0 { |
| 322 |
regulator-min-microvolt = <3000000>; |
| 323 |
regulator-max-microvolt = <3000000>; |
| 324 |
regulator-name = "vcc-pg"; |
| 325 |
}; |
| 326 |
|
| 327 |
reg_ldo_io1: ldo_io1 { |
| 328 |
regulator-min-microvolt = <2500000>; |
| 329 |
regulator-max-microvolt = <2500000>; |
| 330 |
regulator-name = "vcc-pa-gmac-2v5"; |
| 331 |
}; |
| 332 |
|
| 333 |
reg_rtc_ldo: rtc_ldo { |
| 334 |
regulator-name = "vcc-rtc-vdd1v8-io"; |
| 335 |
}; |
| 336 |
|
| 337 |
sw { |
| 338 |
/* unused */ |
| 339 |
}; |
| 340 |
}; |
| 341 |
}; |
| 342 |
|
| 343 |
axp806: pmic@745 { |
| 344 |
compatible = "x-powers,axp806"; |
| 345 |
reg = <0x745>; |
| 346 |
interrupt-parent = <&nmi_intc>; |
| 347 |
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 348 |
interrupt-controller; |
| 349 |
#interrupt-cells = <1>; |
| 350 |
bldoin-supply = <®_dcdce>; |
| 351 |
|
| 352 |
regulators { |
| 353 |
reg_s_aldo1: aldo1 { |
| 354 |
regulator-always-on; |
| 355 |
regulator-min-microvolt = <3000000>; |
| 356 |
regulator-max-microvolt = <3000000>; |
| 357 |
regulator-name = "avcc"; |
| 358 |
}; |
| 359 |
|
| 360 |
aldo2 { |
| 361 |
/* |
| 362 |
* unused, but use a different name to |
| 363 |
* avoid name clash with axp809's aldo's |
| 364 |
*/ |
| 365 |
regulator-name = "s_aldo2"; |
| 366 |
}; |
| 367 |
|
| 368 |
aldo3 { |
| 369 |
/* |
| 370 |
* unused, but use a different name to |
| 371 |
* avoid name clash with axp809's aldo's |
| 372 |
*/ |
| 373 |
regulator-name = "s_aldo3"; |
| 374 |
}; |
| 375 |
|
| 376 |
reg_bldo1: bldo1 { |
| 377 |
regulator-always-on; |
| 378 |
regulator-min-microvolt = <1700000>; |
| 379 |
regulator-max-microvolt = <1900000>; |
| 380 |
regulator-name = "vcc18-efuse-adc-display-csi"; |
| 381 |
}; |
| 382 |
|
| 383 |
reg_bldo2: bldo2 { |
| 384 |
regulator-always-on; |
| 385 |
regulator-min-microvolt = <1700000>; |
| 386 |
regulator-max-microvolt = <1900000>; |
| 387 |
regulator-name = |
| 388 |
"vdd18-drampll-vcc18-pll-cpvdd"; |
| 389 |
}; |
| 390 |
|
| 391 |
bldo3 { |
| 392 |
/* unused */ |
| 393 |
}; |
| 394 |
|
| 395 |
reg_bldo4: bldo4 { |
| 396 |
regulator-min-microvolt = <1100000>; |
| 397 |
regulator-max-microvolt = <1300000>; |
| 398 |
regulator-name = "vcc12-hsic"; |
| 399 |
}; |
| 400 |
|
| 401 |
reg_cldo1: cldo1 { |
| 402 |
/* |
| 403 |
* This was 3V in the original design, but |
| 404 |
* 3.3V is the recommended supply voltage |
| 405 |
* for the Ethernet PHY. |
| 406 |
*/ |
| 407 |
regulator-min-microvolt = <3300000>; |
| 408 |
regulator-max-microvolt = <3300000>; |
| 409 |
/* |
| 410 |
* The PHY requires 20ms after all voltages |
| 411 |
* are applied until core logic is ready and |
| 412 |
* 30ms after the reset pin is de-asserted. |
| 413 |
* Set a 100ms delay to account for PMIC |
| 414 |
* ramp time and board traces. |
| 415 |
*/ |
| 416 |
regulator-enable-ramp-delay = <100000>; |
| 417 |
regulator-name = "vcc-gmac-phy"; |
| 418 |
}; |
| 419 |
|
| 420 |
reg_cldo2: cldo2 { |
| 421 |
regulator-min-microvolt = <2800000>; |
| 422 |
regulator-max-microvolt = <2800000>; |
| 423 |
regulator-name = "afvcc-cam"; |
| 424 |
}; |
| 425 |
|
| 426 |
reg_cldo3: cldo3 { |
| 427 |
regulator-min-microvolt = <3000000>; |
| 428 |
regulator-max-microvolt = <3000000>; |
| 429 |
regulator-name = "vcc-io-wifi-codec-io2"; |
| 430 |
}; |
| 431 |
|
| 432 |
reg_dcdca: dcdca { |
| 433 |
regulator-always-on; |
| 434 |
regulator-min-microvolt = <800000>; |
| 435 |
regulator-max-microvolt = <1100000>; |
| 436 |
regulator-name = "vdd-cpub"; |
| 437 |
}; |
| 438 |
|
| 439 |
reg_dcdcd: dcdcd { |
| 440 |
regulator-always-on; |
| 441 |
regulator-min-microvolt = <800000>; |
| 442 |
regulator-max-microvolt = <1100000>; |
| 443 |
regulator-name = "vdd-vpu"; |
| 444 |
}; |
| 445 |
|
| 446 |
reg_dcdce: dcdce { |
| 447 |
regulator-always-on; |
| 448 |
regulator-min-microvolt = <2100000>; |
| 449 |
regulator-max-microvolt = <2100000>; |
| 450 |
regulator-name = "vcc-bldo-codec-ldoin"; |
| 451 |
}; |
| 452 |
|
| 453 |
sw { |
| 454 |
/* |
| 455 |
* unused, but use a different name to |
| 456 |
* avoid name clash with axp809's sw |
| 457 |
*/ |
| 458 |
regulator-name = "s_sw"; |
| 459 |
}; |
| 460 |
}; |
| 461 |
}; |
| 462 |
|
| 463 |
ac100: codec@e89 { |
| 464 |
compatible = "x-powers,ac100"; |
| 465 |
reg = <0xe89>; |
| 466 |
|
| 467 |
ac100_codec: codec { |
| 468 |
compatible = "x-powers,ac100-codec"; |
| 469 |
interrupt-parent = <&r_pio>; |
| 470 |
interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */ |
| 471 |
#clock-cells = <0>; |
| 472 |
clock-output-names = "4M_adda"; |
| 473 |
}; |
| 474 |
|
| 475 |
ac100_rtc: rtc { |
| 476 |
compatible = "x-powers,ac100-rtc"; |
| 477 |
interrupt-parent = <&nmi_intc>; |
| 478 |
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 479 |
clocks = <&ac100_codec>; |
| 480 |
#clock-cells = <1>; |
| 481 |
clock-output-names = "cko1_rtc", |
| 482 |
"cko2_rtc", |
| 483 |
"cko3_rtc"; |
| 484 |
}; |
| 485 |
}; |
| 486 |
}; |
| 487 |
|
| 488 |
#include "axp809.dtsi" |
| 489 |
|
| 490 |
&uart0 { |
| 491 |
pinctrl-names = "default"; |
| 492 |
pinctrl-0 = <&uart0_ph_pins>; |
| 493 |
status = "okay"; |
| 494 |
}; |
| 495 |
|
| 496 |
&usbphy1 { |
| 497 |
phy-supply = <®_usb1_vbus>; |
| 498 |
status = "okay"; |
| 499 |
}; |
| 500 |
|
| 501 |
&usbphy2 { |
| 502 |
phy-supply = <®_bldo4>; |
| 503 |
/* Enable if HSIC peripheral is connected */ |
| 504 |
status = "disabled"; |
| 505 |
}; |
| 506 |
|
| 507 |
&usbphy3 { |
| 508 |
phy-supply = <®_usb3_vbus>; |
| 509 |
status = "okay"; |
| 510 |
}; |