| 1 |
/* |
| 2 |
* Copyright 2015 Vishnu Patekar |
| 3 |
* Vishnu Patekar <[email protected]> |
| 4 |
* |
| 5 |
* This file is dual-licensed: you can use it either under the terms |
| 6 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 7 |
* licensing only applies to this file, and not this project as a |
| 8 |
* whole. |
| 9 |
* |
| 10 |
* a) This file is free software; you can redistribute it and/or |
| 11 |
* modify it under the terms of the GNU General Public License as |
| 12 |
* published by the Free Software Foundation; either version 2 of the |
| 13 |
* License, or (at your option) any later version. |
| 14 |
* |
| 15 |
* This file is distributed in the hope that it will be useful, |
| 16 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 18 |
* GNU General Public License for more details. |
| 19 |
* |
| 20 |
* Or, alternatively, |
| 21 |
* |
| 22 |
* b) Permission is hereby granted, free of charge, to any person |
| 23 |
* obtaining a copy of this software and associated documentation |
| 24 |
* files (the "Software"), to deal in the Software without |
| 25 |
* restriction, including without limitation the rights to use, |
| 26 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 27 |
* sell copies of the Software, and to permit persons to whom the |
| 28 |
* Software is furnished to do so, subject to the following |
| 29 |
* conditions: |
| 30 |
* |
| 31 |
* The above copyright notice and this permission notice shall be |
| 32 |
* included in all copies or substantial portions of the Software. |
| 33 |
* |
| 34 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 35 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 36 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 37 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 38 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 39 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 40 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 41 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 42 |
*/ |
| 43 |
|
| 44 |
/dts-v1/; |
| 45 |
#include "sun8i-a83t.dtsi" |
| 46 |
|
| 47 |
#include <dt-bindings/gpio/gpio.h> |
| 48 |
|
| 49 |
/ { |
| 50 |
model = "Allwinner A83T H8Homlet Proto Dev Board v2.0"; |
| 51 |
compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t"; |
| 52 |
|
| 53 |
aliases { |
| 54 |
serial0 = &uart0; |
| 55 |
}; |
| 56 |
|
| 57 |
chosen { |
| 58 |
stdout-path = "serial0:115200n8"; |
| 59 |
}; |
| 60 |
|
| 61 |
reg_usb0_vbus: reg-usb0-vbus { |
| 62 |
compatible = "regulator-fixed"; |
| 63 |
regulator-name = "usb0-vbus"; |
| 64 |
regulator-min-microvolt = <5000000>; |
| 65 |
regulator-max-microvolt = <5000000>; |
| 66 |
regulator-boot-on; |
| 67 |
enable-active-high; |
| 68 |
gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ |
| 69 |
}; |
| 70 |
|
| 71 |
reg_usb1_vbus: reg-usb1-vbus { |
| 72 |
compatible = "regulator-fixed"; |
| 73 |
regulator-name = "usb1-vbus"; |
| 74 |
regulator-min-microvolt = <5000000>; |
| 75 |
regulator-max-microvolt = <5000000>; |
| 76 |
regulator-boot-on; |
| 77 |
enable-active-high; |
| 78 |
gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ |
| 79 |
}; |
| 80 |
}; |
| 81 |
|
| 82 |
&cpu0 { |
| 83 |
cpu-supply = <®_dcdc2>; |
| 84 |
}; |
| 85 |
|
| 86 |
&cpu100 { |
| 87 |
cpu-supply = <®_dcdc3>; |
| 88 |
}; |
| 89 |
|
| 90 |
&ehci0 { |
| 91 |
status = "okay"; |
| 92 |
}; |
| 93 |
|
| 94 |
&mmc0 { |
| 95 |
pinctrl-names = "default"; |
| 96 |
pinctrl-0 = <&mmc0_pins>; |
| 97 |
vmmc-supply = <®_dcdc1>; |
| 98 |
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
| 99 |
bus-width = <4>; |
| 100 |
status = "okay"; |
| 101 |
}; |
| 102 |
|
| 103 |
&mmc2 { |
| 104 |
pinctrl-names = "default"; |
| 105 |
pinctrl-0 = <&mmc2_8bit_emmc_pins>; |
| 106 |
vmmc-supply = <®_dcdc1>; |
| 107 |
vqmmc-supply = <®_dcdc1>; |
| 108 |
bus-width = <8>; |
| 109 |
non-removable; |
| 110 |
cap-mmc-hw-reset; |
| 111 |
status = "okay"; |
| 112 |
}; |
| 113 |
|
| 114 |
&ohci0 { |
| 115 |
status = "okay"; |
| 116 |
}; |
| 117 |
|
| 118 |
&r_rsb { |
| 119 |
status = "okay"; |
| 120 |
|
| 121 |
axp81x: pmic@3a3 { |
| 122 |
compatible = "x-powers,axp818", "x-powers,axp813"; |
| 123 |
reg = <0x3a3>; |
| 124 |
interrupt-parent = <&r_intc>; |
| 125 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; |
| 126 |
eldoin-supply = <®_dcdc1>; |
| 127 |
swin-supply = <®_dcdc1>; |
| 128 |
}; |
| 129 |
|
| 130 |
ac100: codec@e89 { |
| 131 |
compatible = "x-powers,ac100"; |
| 132 |
reg = <0xe89>; |
| 133 |
|
| 134 |
ac100_codec: codec { |
| 135 |
compatible = "x-powers,ac100-codec"; |
| 136 |
interrupt-parent = <&r_pio>; |
| 137 |
interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */ |
| 138 |
#clock-cells = <0>; |
| 139 |
clock-output-names = "4M_adda"; |
| 140 |
}; |
| 141 |
|
| 142 |
ac100_rtc: rtc { |
| 143 |
compatible = "x-powers,ac100-rtc"; |
| 144 |
interrupt-parent = <&r_intc>; |
| 145 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; |
| 146 |
clocks = <&ac100_codec>; |
| 147 |
#clock-cells = <1>; |
| 148 |
clock-output-names = "cko1_rtc", |
| 149 |
"cko2_rtc", |
| 150 |
"cko3_rtc"; |
| 151 |
}; |
| 152 |
}; |
| 153 |
}; |
| 154 |
|
| 155 |
#include "axp81x.dtsi" |
| 156 |
|
| 157 |
&ac_power_supply { |
| 158 |
status = "okay"; |
| 159 |
}; |
| 160 |
|
| 161 |
®_aldo1 { |
| 162 |
regulator-always-on; |
| 163 |
regulator-min-microvolt = <1800000>; |
| 164 |
regulator-max-microvolt = <1800000>; |
| 165 |
regulator-name = "vcc-1v8"; |
| 166 |
}; |
| 167 |
|
| 168 |
®_aldo2 { |
| 169 |
regulator-always-on; |
| 170 |
regulator-min-microvolt = <1800000>; |
| 171 |
regulator-max-microvolt = <1800000>; |
| 172 |
regulator-name = "dram-pll"; |
| 173 |
}; |
| 174 |
|
| 175 |
®_aldo3 { |
| 176 |
regulator-always-on; |
| 177 |
regulator-min-microvolt = <3000000>; |
| 178 |
regulator-max-microvolt = <3000000>; |
| 179 |
regulator-name = "avcc"; |
| 180 |
}; |
| 181 |
|
| 182 |
®_dcdc1 { |
| 183 |
regulator-always-on; |
| 184 |
regulator-min-microvolt = <3300000>; |
| 185 |
regulator-max-microvolt = <3300000>; |
| 186 |
regulator-name = "vcc-3v3"; |
| 187 |
}; |
| 188 |
|
| 189 |
®_dcdc2 { |
| 190 |
regulator-always-on; |
| 191 |
regulator-min-microvolt = <700000>; |
| 192 |
regulator-max-microvolt = <1100000>; |
| 193 |
regulator-name = "vdd-cpua"; |
| 194 |
}; |
| 195 |
|
| 196 |
®_dcdc3 { |
| 197 |
regulator-always-on; |
| 198 |
regulator-min-microvolt = <700000>; |
| 199 |
regulator-max-microvolt = <1100000>; |
| 200 |
regulator-name = "vdd-cpub"; |
| 201 |
}; |
| 202 |
|
| 203 |
®_dcdc4 { |
| 204 |
regulator-min-microvolt = <700000>; |
| 205 |
regulator-max-microvolt = <1100000>; |
| 206 |
regulator-name = "vdd-gpu"; |
| 207 |
}; |
| 208 |
|
| 209 |
®_dcdc5 { |
| 210 |
regulator-always-on; |
| 211 |
regulator-min-microvolt = <1500000>; |
| 212 |
regulator-max-microvolt = <1500000>; |
| 213 |
regulator-name = "vcc-dram"; |
| 214 |
}; |
| 215 |
|
| 216 |
®_dcdc6 { |
| 217 |
regulator-always-on; |
| 218 |
regulator-min-microvolt = <900000>; |
| 219 |
regulator-max-microvolt = <900000>; |
| 220 |
regulator-name = "vdd-sys"; |
| 221 |
}; |
| 222 |
|
| 223 |
®_dldo2 { |
| 224 |
regulator-min-microvolt = <3300000>; |
| 225 |
regulator-max-microvolt = <3300000>; |
| 226 |
regulator-name = "vcc-mipi"; |
| 227 |
}; |
| 228 |
|
| 229 |
®_dldo4 { |
| 230 |
/* |
| 231 |
* The PHY requires 20ms after all voltages are applied until core |
| 232 |
* logic is ready and 30ms after the reset pin is de-asserted. |
| 233 |
* Set a 100ms delay to account for PMIC ramp time and board traces. |
| 234 |
*/ |
| 235 |
regulator-enable-ramp-delay = <100000>; |
| 236 |
regulator-min-microvolt = <3300000>; |
| 237 |
regulator-max-microvolt = <3300000>; |
| 238 |
regulator-name = "vcc-ephy"; |
| 239 |
}; |
| 240 |
|
| 241 |
®_fldo1 { |
| 242 |
regulator-min-microvolt = <1080000>; |
| 243 |
regulator-max-microvolt = <1320000>; |
| 244 |
regulator-name = "vdd12-hsic"; |
| 245 |
}; |
| 246 |
|
| 247 |
®_fldo2 { |
| 248 |
/* |
| 249 |
* Despite the embedded CPUs core not being used in any way, |
| 250 |
* this must remain on or the system will hang. |
| 251 |
*/ |
| 252 |
regulator-always-on; |
| 253 |
regulator-min-microvolt = <700000>; |
| 254 |
regulator-max-microvolt = <1100000>; |
| 255 |
regulator-name = "vdd-cpus"; |
| 256 |
}; |
| 257 |
|
| 258 |
®_rtc_ldo { |
| 259 |
regulator-name = "vcc-rtc"; |
| 260 |
}; |
| 261 |
|
| 262 |
®_sw { |
| 263 |
regulator-name = "vcc-wifi"; |
| 264 |
}; |
| 265 |
|
| 266 |
&uart0 { |
| 267 |
pinctrl-names = "default"; |
| 268 |
pinctrl-0 = <&uart0_pb_pins>; |
| 269 |
status = "okay"; |
| 270 |
}; |
| 271 |
|
| 272 |
&usbphy { |
| 273 |
usb0_vbus-supply = <®_usb0_vbus>; |
| 274 |
usb1_vbus-supply = <®_usb1_vbus>; |
| 275 |
status = "okay"; |
| 276 |
}; |
| 277 |
|
| 278 |
&usb_otg { |
| 279 |
dr_mode = "host"; |
| 280 |
status = "okay"; |
| 281 |
}; |