| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR X11) |
| 2 |
/* |
| 3 |
* Copyright 2018 Icenowy Zheng <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include "suniv-f1c100s.dtsi" |
| 8 |
|
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "Lichee Pi Nano"; |
| 13 |
compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; |
| 14 |
|
| 15 |
aliases { |
| 16 |
mmc0 = &mmc0; |
| 17 |
serial0 = &uart0; |
| 18 |
spi0 = &spi0; |
| 19 |
}; |
| 20 |
|
| 21 |
chosen { |
| 22 |
stdout-path = "serial0:115200n8"; |
| 23 |
}; |
| 24 |
|
| 25 |
reg_vcc3v3: vcc3v3 { |
| 26 |
compatible = "regulator-fixed"; |
| 27 |
regulator-name = "vcc3v3"; |
| 28 |
regulator-min-microvolt = <3300000>; |
| 29 |
regulator-max-microvolt = <3300000>; |
| 30 |
}; |
| 31 |
}; |
| 32 |
|
| 33 |
&mmc0 { |
| 34 |
broken-cd; |
| 35 |
bus-width = <4>; |
| 36 |
disable-wp; |
| 37 |
status = "okay"; |
| 38 |
vmmc-supply = <®_vcc3v3>; |
| 39 |
}; |
| 40 |
|
| 41 |
&spi0 { |
| 42 |
pinctrl-names = "default"; |
| 43 |
pinctrl-0 = <&spi0_pc_pins>; |
| 44 |
status = "okay"; |
| 45 |
|
| 46 |
flash@0 { |
| 47 |
#address-cells = <1>; |
| 48 |
#size-cells = <1>; |
| 49 |
compatible = "winbond,w25q128", "jedec,spi-nor"; |
| 50 |
reg = <0>; |
| 51 |
spi-max-frequency = <40000000>; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
&otg_sram { |
| 56 |
status = "okay"; |
| 57 |
}; |
| 58 |
|
| 59 |
&uart0 { |
| 60 |
pinctrl-names = "default"; |
| 61 |
pinctrl-0 = <&uart0_pe_pins>; |
| 62 |
status = "okay"; |
| 63 |
}; |
| 64 |
|
| 65 |
&codec { |
| 66 |
allwinner,audio-routing = |
| 67 |
"Headphone", "HP", |
| 68 |
"Headphone", "HPCOM", |
| 69 |
"MIC", "Mic"; |
| 70 |
status = "okay"; |
| 71 |
}; |
| 72 |
|
| 73 |
&usb_otg { |
| 74 |
dr_mode = "otg"; |
| 75 |
status = "okay"; |
| 76 |
}; |
| 77 |
|
| 78 |
&usbphy { |
| 79 |
usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */ |
| 80 |
status = "okay"; |
| 81 |
}; |