Debian Codegraph @

upstream/debian-unstable/man5/systemd.device.5

raw
1 '\" t
2 .TH "SYSTEMD\&.DEVICE" "5" "" "systemd 261~rc3" "systemd.device"
3 .\" -----------------------------------------------------------------
4 .\" * Define some portability stuff
5 .\" -----------------------------------------------------------------
6 .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
7 .\" http://bugs.debian.org/507673
8 .\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
9 .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
10 .ie \n(.g .ds Aq \(aq
11 .el .ds Aq '
12 .\" -----------------------------------------------------------------
13 .\" * set default formatting
14 .\" -----------------------------------------------------------------
15 .\" disable hyphenation
16 .nh
17 .\" disable justification (adjust text to left margin only)
18 .ad l
19 .\" -----------------------------------------------------------------
20 .\" * MAIN CONTENT STARTS HERE *
21 .\" -----------------------------------------------------------------
22 .SH "NAME"
23 systemd.device \- Device unit configuration
24 .SH "SYNOPSIS"
25 .PP
26 \fIdevice\fR\&.device
27 .SH "DESCRIPTION"
28 .PP
29 A unit configuration file whose name ends in
30 "\&.device"
31 encodes information about a device unit as exposed in the sysfs/\fBudev\fR(7)
32 device tree\&. This may be used to define dependencies between devices and other units\&.
33 .PP
34 This unit type has no specific options\&. See
35 \fBsystemd.unit\fR(5)
36 for the common options of all unit configuration files\&. The common configuration items are configured in the generic [Unit] and [Install] sections\&. A separate [Device] section does not exist, since no device\-specific options may be configured\&.
37 .PP
38 systemd will dynamically create device units for all kernel devices that are marked with the
39 "systemd"
40 udev tag (by default all block and network devices, and a few others)\&. Note that
41 \fIif \fR\fIsystemd\-udevd\&.service\fR\fI is not running, no device units will be available (for example in a typical container)\fR\&.
42 .PP
43 Device units are named after the
44 /sys/
45 and
46 /dev/
47 paths they control\&. Example: the device
48 /dev/sda5
49 is exposed in systemd as
50 dev\-sda5\&.device\&. For details about the escaping logic used to convert a file system path to a unit name see
51 \fBsystemd.unit\fR(5)\&.
52 .PP
53 To tag a udev device, use
54 "TAG+="systemd""
55 in the udev rules file, see
56 \fBudev\fR(7)
57 for details\&.
58 .PP
59 Device units will be reloaded by systemd whenever the corresponding device generates a
60 "changed"
61 event\&. Other units can use
62 \fIReloadPropagatedFrom=\fR
63 to react to that event\&.
64 .SH "AUTOMATIC DEPENDENCIES"
65 .SS "Implicit Dependencies"
66 .PP
67 Many unit types automatically acquire dependencies on device units of devices they require\&. For example,
68 \&.socket
69 unit acquire dependencies on the device units of the network interface specified in
70 \fIBindToDevice=\fR\&. Similar, swap and mount units acquire dependencies on the units encapsulating their backing block devices\&.
71 .SS "Default Dependencies"
72 .PP
73 There are no default dependencies for device units\&.
74 .SH "THE UDEV DATABASE"
75 .PP
76 Unit settings of device units may either be configured via unit files, or directly from the udev database\&. The following udev device properties are understood by the service manager:
77 .PP
78 \fISYSTEMD_WANTS=\fR, \fISYSTEMD_USER_WANTS=\fR
79 .RS 4
80 Adds dependencies of type
81 \fIWants=\fR
82 from the device unit to the specified units\&.
83 \fISYSTEMD_WANTS=\fR
84 is read by the system service manager,
85 \fISYSTEMD_USER_WANTS=\fR
86 by user service manager instances\&. These properties may be used to activate arbitrary units when a specific device becomes available\&.
87 .sp
88 Note that this and the other udev device properties are not taken into account unless the device is tagged with the
89 "systemd"
90 tag in the udev database, because otherwise the device is not exposed as a systemd unit (see above)\&.
91 .sp
92 Note that systemd will only act on
93 \fIWants=\fR
94 dependencies when a device first becomes active\&. It will not act on them if they are added to devices that are already active\&. Use
95 \fISYSTEMD_READY=\fR
96 (see below) to configure when a udev device shall be considered active, and thus when to trigger the dependencies\&.
97 .sp
98 The specified property value should be a space\-separated list of valid unit names\&. If a unit template name is specified (that is, a unit name containing an
99 "@"
100 character indicating a unit name to use for multiple instantiation, but with an empty instance name following the
101 "@"), it will be automatically instantiated by the device\*(Aqs
102 "sysfs"
103 path (that is: the path is escaped and inserted as instance name into the template unit name)\&. This is useful in order to instantiate a specific template unit once for each device that appears and matches specific properties\&.
104 .RE
105 .PP
106 \fISYSTEMD_ALIAS=\fR
107 .RS 4
108 Adds an additional alias name to the device unit\&. This must be an absolute path that is automatically transformed into a unit name\&. (See above\&.)
109 .RE
110 .PP
111 \fISYSTEMD_READY=\fR
112 .RS 4
113 If set to 0, systemd will consider this device unplugged even if it shows up in the udev tree\&. If this property is unset or set to 1, the device will be considered plugged if it is visible in the udev tree\&.
114 .sp
115 This option is useful for devices that initially show up in an uninitialized state in the tree, and for which a
116 "changed"
117 event is generated the moment they are fully set up\&. Note that
118 \fISYSTEMD_WANTS=\fR
119 (see above) is not acted on as long as
120 \fISYSTEMD_READY=0\fR
121 is set for a device\&.
122 .RE
123 .PP
124 \fIID_MODEL_FROM_DATABASE=\fR, \fIID_MODEL=\fR
125 .RS 4
126 If set, this property is used as description string for the device unit\&.
127 .RE
128 .SH "OPTIONS"
129 .PP
130 Device unit files may include [Unit] and [Install] sections, which are described in
131 \fBsystemd.unit\fR(5)\&. No options specific to this file type are supported\&.
132 .SH "SEE ALSO"
133 .PP
134 \fBsystemd\fR(1), \fBsystemctl\fR(1), \fBsystemd.unit\fR(5), \fBudev\fR(7), \fBsystemd.directives\fR(7)