Debian Codegraph @

upstream/debian-unstable/man5/sane-p5.5

raw
1 .TH "sane\-p5" "5" "15 Feb 2010" "" "SANE Scanner Access Now Easy"
2 .IX sane\-p5
3 .SH "NAME"
4 sane\-p5 \- SANE backend for the Primax PagePartner
5 .SH "DESCRIPTION"
6 The
7 .B sane\-p5
8 library implements a SANE (Scanner Access Now Easy) backend that
9 provides access to the Primax PagePartner parallel port sheet fed scanner.
10 .PP
11 This backend handles 100, 150, 200, 300 and 600 dpi scan resolutions,
12 in color and gray modes. The 600 dpi is actually 300x600 with lines
13 enlarged to match the vertical resolution.
14 .PP
15 .B EPP/ECP MODES ONLY
16 The current version of the backend uses only EPP or ECP mode to communicate
17 with the scanner. It is
18 recommended that you set your parallel port to EPP in BIOS with the current
19 version of this backend. ECPEPP will only
20 work if you use a 2.4 or 2.6 kernel with ppdev character device support.
21 .PP
22
23 .SH "DEVICE NAMES"
24 This backend expects device names of the form:
25 .PP
26 .RS
27 .I port value
28 .RE
29 .PP
30 Where
31 \fBvalue\fR is:
32
33 .RS
34 .TP
35 auto
36 autodetect all parallel ports and probe
37 them for scanner
38 .TP
39 /dev/parport0
40 uses linux ppdev device, depending on the
41 number of available parallel port, you
42 have to use /dev/parport1, /dev/parport2, ...
43 .PP
44 .RE
45 You can rename any device using the
46 .PP
47 .RS
48 .br
49 .I option name my_name
50 .RE
51 .PP
52 option. This option apply to the last port option.
53
54 .SH "CONFIGURATION"
55 Please make sure to edit
56 .I dll.conf
57 .B before
58 you use the backend, since this backend isn't enabled by default.
59 .PP
60
61 .SH "FILES"
62 .TP
63 .I /etc/sane.d/p5.conf
64 The backend configuration file (see also description of
65 .B SANE_CONFIG_DIR
66 below).
67 .TP
68 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-p5.a
69 The static library implementing this backend.
70 .TP
71 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-p5.so
72 The shared library implementing this backend (present on systems that
73 support dynamic loading).
74
75 .SH "ENVIRONMENT"
76 .TP
77 .B SANE_CONFIG_DIR
78 This environment variable specifies the list of directories that may
79 contain the configuration file. On *NIX systems, the directories are
80 separated by a colon (`:'), under OS/2, they are separated by a
81 semi-colon (`;'). If this variable is not set, the configuration file
82 is searched in two default directories: first, the current working
83 directory (".") and then in
84 .IR /etc/sane.d .
85 If the value of the
86 environment variable ends with the directory separator character, then
87 the default directories are searched after the explicitly specified
88 directories. For example, setting
89 .B SANE_CONFIG_DIR
90 to "/tmp/config:" would result in directories
91 .IR "tmp/config" ,
92 .IR "." ,
93 and
94 .I "/etc/sane.d"
95 being searched (in this order).
96 .TP
97 .B SANE_DEBUG_P5
98 If the library was compiled with debug support enabled, this
99 environment variable controls the debug level for this backend. E.g.,
100 a value of 255 requests all debug output to be printed. Smaller
101 levels reduce verbosity.
102
103 .PP
104 .RS
105 .ft CR
106 .nf
107 level debug output
108 \-\-\-\-\-\-\- \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
109 0 critical errors
110 1 errors
111 2 warnings & minor errors
112 4 information messages
113 8 start/stop of functions
114 16 tracing messages
115 32 I/O functions
116 64 I/O functions with traces
117 128 scanned/calibration data
118 .fi
119 .ft R
120
121 .SH "SEE ALSO"
122 .BR sane (7),
123 .BR sane\-net (5),
124 .BR saned (8),
125 .BR scanimage (1)
126
127 .SH "AUTHOR"
128 St\['e]phane Voltz
129 .RI < [email protected] >
130
131 .SH "CREDITS"
132 Support for the Prima PagePartner has been made possible thank to an hardware donation
133 by S\['e]bastien Lange.
134
135 .SH "BUG REPORTS"
136 If something doesn't work mail [email protected] or submit an
137 issue via
138 .I https://gitlab.com/sane-project/backends/issues/new
139 with a label of backend/p5.
140 Please give as much information as you can.
141
142 .TP
143 .I SANE version
144 run "scanimage \-V" to determine this
145 .TP
146 .I the backend version and your scanner hardware
147 run
148 .I "SANE_DEBUG_P5=255 scanimage \-L 2>log"
149 as root. If you don't get any output from the p5 backend, make sure a line "p5" is included into
150 your
151 .IR /etc/sane.d/dll.conf .
152 If your scanner isn't detected, make sure you've defined the right port address, or the
153 correct device
154 in your
155 .I p5.conf
156 file.
157 .TP
158 .I the name of your scanner/vendor
159 also a worthy information. Please also include the optical resolution and lamp type of your
160 scanner, both can be found in the manual of your scanner.
161 .TP
162 .I any further comments
163 if you have comments about the documentation (what could be done better), or you
164 think I should know something, please include it.