Debian Codegraph @

upstream/debian-unstable/man5/sane-ma1509.5

raw
1 .TH sane\-ma1509 5 "13 Jul 2008" "" "SANE Scanner Access Now Easy"
2 .IX sane\-ma1509
3 .SH NAME
4 sane\-ma1509 \- SANE backend for Mustek BearPaw 1200F USB scanner
5 .SH DESCRIPTION
6 The
7 .B sane\-ma1509
8 library implements a SANE (Scanner Access Now Easy) backend that provides
9 access to the Mustek BearPaw 1200F USB flatbed scanner. This scanner is based
10 on the MA-1509 chipset. Other scanners that use this chip (if they exist) may
11 also work.
12 .PP
13 This backend is ALPHA software. Be careful and remove the power plug
14 immediately if your hear unusual noises.
15 .PP
16 More details can be found on the
17 .B sane\-ma1509
18 backend homepage
19 .IR http://www.meier\-geinitz.de/sane/ma1509\-backend/ .
20 .PP
21 Other Mustek USB scanners are supported by the
22 .BR sane\-mustek_usb (5),
23 .BR sane\-gt68xx (5)
24 and
25 .BR sane\-plustek (5)
26 backends.
27 .PP
28 This backend can only work with scanners that are already detected by the
29 operating system. See
30 .BR sane\-usb (5)
31 for details.
32 .PP
33 If you own a scanner other than the Mustek BearPaw 1200F that works with this
34 backend, please let me know this by sending the scanner's exact model name and
35 the USB vendor and device ids (e.g. from
36 .I /proc/bus/usb/devices
37 or syslog) to me.
38
39 .SH "DEVICE NAMES"
40 This backend expects device names of the form:
41 .PP
42 .RS
43 .I special
44 .RE
45 .PP
46 Where
47 .I special
48 is a path-name for the special device that corresponds to a USB scanner.
49 With Linux, such a device name could be
50 .I /dev/usb/scanner0
51 or
52 .IR libusb:001:002 ,
53 for example.
54 .PP
55
56 .SH CONFIGURATION
57 The contents of the
58 .I ma1509.conf
59 file is a list of options and device names that correspond to Mustek BearPaw
60 1200F scanners. Empty lines and lines starting with a hash mark (#) are
61 ignored.
62 .PP
63 Instead of using the device name, the scanner can be autodetected by
64 .B "usb vendor_id product_id"
65 statements which are already included into
66 .IR ma1509.conf .
67 This is only supported with Linux 2.4.8 and higher and all systems that
68 support libsub. "vendor_id" and "product_id" are hexadecimal numbers that
69 identify the scanner. If this doesn't work, a device name must be placed in
70 .I ma1509.conf
71 as described above.
72 .PP
73 To set the time the lamp needs for warm-up, use
74 .B option
75 .B warmup-time
76 in
77 .IR ma1509.conf .
78 The time is given in seconds after the option. The default is 30 seconds.
79 .SH FILES
80 .TP
81 .I /etc/sane.d/ma1509.conf
82 The backend configuration file (see also description of
83 .B SANE_CONFIG_DIR
84 below).
85 .TP
86 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-ma1509.a
87 The static library implementing this backend.
88 .TP
89 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-ma1509.so
90 The shared library implementing this backend (present on systems that
91 support dynamic loading).
92 .SH ENVIRONMENT
93 .TP
94 .B SANE_CONFIG_DIR
95 This environment variable specifies the list of directories that may
96 contain the configuration file. On *NIX systems, the directories are
97 separated by a colon (`:'), under OS/2, they are separated by a
98 semi-colon (`;'). If this variable is not set, the configuration file
99 is searched in two default directories: first, the current working
100 directory (".") and then in
101 .IR /etc/sane.d .
102 If the value of the
103 environment variable ends with the directory separator character, then
104 the default directories are searched after the explicitly specified
105 directories. For example, setting
106 .B SANE_CONFIG_DIR
107 to "/tmp/config:" would result in directories
108 .IR tmp/config ,
109 .IR . ,
110 and
111 .I "/etc/sane.d"
112 being searched (in this order).
113 .TP
114 .B SANE_DEBUG_MA1509
115 If the library was compiled with debug support enabled, this
116 environment variable controls the debug level for this backend. Higher
117 debug levels increase the verbosity of the output.
118
119 .SH "SEE ALSO"
120 .BR sane (7),
121 .BR sane\-usb (5),
122 .BR sane\-gt68xx (5),
123 .BR sane\-plustek (5),
124 .BR sane\-mustek_usb (5),
125 .BR sane\-mustek (5),
126 .BR sane\-mustek_pp (5),
127 .br
128 .I http://www.meier\-geinitz.de/sane/ma1509\-backend/
129
130 .SH AUTHOR
131 Henning Meier-Geinitz
132 .RI < henning@meier\-geinitz.de >
133
134 .SH BUGS
135 Resolutions higher than 600 dpi don't work
136 .br
137 Transparency adapter and automatic document feeder is not supported yet
138 .br
139 No support for "high-speed" mode (jpeg)
140 .PP
141 More detailed bug information is available at the MA-1509 backend homepage
142 .IR http://www.meier\-geinitz.de/sane/ma1509-backend/ .