| 1 |
.TH sane\-artec_eplus48u 5 "11 Jul 2008" "" "SANE" |
| 2 |
.SH NAME |
| 3 |
sane\-artec_eplus48u \- SANE backend for the scanner Artec E+ 48U and re-badged models |
| 4 |
.SH DESCRIPTION |
| 5 |
The |
| 6 |
.B sane\-artec_eplus48u |
| 7 |
library implements a SANE (Scanner Access Now Easy) backend that provides |
| 8 |
access to several USB flatbed scanners using the GT6816 chipset like the Artec E+ 48U. |
| 9 |
These scanners have a contact image sensor (CIS). |
| 10 |
.PP |
| 11 |
A complete list of supported devices can be found on |
| 12 |
.IR http://www.sane\-project.org/sane\-supported\-devices.html . |
| 13 |
.PP |
| 14 |
This is ALPHA software. Especially if you test new or untested scanners, keep |
| 15 |
your hand at the scanner's plug and unplug it, if the head bumps at the end of |
| 16 |
the scan area. |
| 17 |
.PP |
| 18 |
If you own a scanner other than the ones mentioned on the list that works with this |
| 19 |
backend, please let us know this by sending the scanner's exact model name and |
| 20 |
the USB vendor and product ids (e.g. from |
| 21 |
.IR /proc/bus/usb/devices , |
| 22 |
.BR sane\-find\-scanner (1) |
| 23 |
or syslog) to me. Even if the scanner's name is only |
| 24 |
slightly different from the models mentioned above, please let me know. |
| 25 |
.PP |
| 26 |
.SH KERNEL ISSUES |
| 27 |
If libusb-0.1.6 or later is installed, this section can be skipped. The |
| 28 |
scanner should be found by |
| 29 |
.BR sane\-find\-scanner (1) |
| 30 |
without further actions. For setting permissions and general USB information |
| 31 |
look at |
| 32 |
.BR sane\-usb (5). |
| 33 |
.PP |
| 34 |
When you are using the scanner module, a Linux kernel 2.4.12 or newer is |
| 35 |
required. |
| 36 |
|
| 37 |
.SH FIRMWARE FILE |
| 38 |
You need a firmware file for your scanner. That's a small file containing |
| 39 |
software that will be uploaded to the scanner's memory. For the scanners |
| 40 |
mentioned above, it's usually named |
| 41 |
.I Artec48.usb |
| 42 |
or |
| 43 |
.IR 1200.usb . |
| 44 |
You can find it on the installation CD that was provided by the manufacturer, |
| 45 |
normally in the directory Win98, WinMe or similar. |
| 46 |
If the Windows-driver is installed on your computer, then you can also |
| 47 |
find the firmware file under c:\\windows\\system32\\drivers. |
| 48 |
|
| 49 |
.SH CONFIGURATION |
| 50 |
The contents of the |
| 51 |
.I artec_eplus48u.conf |
| 52 |
file is a list of |
| 53 |
.I usb |
| 54 |
lines containing vendor and product ids that correspond |
| 55 |
to USB scanners. The file can also contain option lines. Empty lines and |
| 56 |
lines starting with a hash mark (#) are ignored. The scanners are |
| 57 |
autodetected by |
| 58 |
.I usb vendor_id product_id |
| 59 |
statements which are already included into |
| 60 |
.I artec_eplus48u.conf . |
| 61 |
"vendor_id" and "product_id" are hexadecimal numbers that identify the scanner. |
| 62 |
.PP |
| 63 |
Every |
| 64 |
.I usb |
| 65 |
section can have additional options. |
| 66 |
.TP |
| 67 |
.B artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb |
| 68 |
The path to the firmware file. This option is required. |
| 69 |
.TP |
| 70 |
.B redGamma 1.0 |
| 71 |
.TP |
| 72 |
.B greenGamma 1.0 |
| 73 |
.TP |
| 74 |
.B blueGamma 1.0 |
| 75 |
.TP |
| 76 |
.B masterGamma 1.9 |
| 77 |
These are the default gamma values. If you set the "Defaults" option with a frontend, |
| 78 |
then the gamma options are reset to the values specified here. |
| 79 |
.TP |
| 80 |
.B redOffset 0x28 |
| 81 |
.TP |
| 82 |
.B greenOffset 0x2f |
| 83 |
.TP |
| 84 |
.B blueOffset 0x2f |
| 85 |
.TP |
| 86 |
.B redExposure 0xa7 |
| 87 |
.TP |
| 88 |
.B greenExposure 0x116 |
| 89 |
.TP |
| 90 |
.B blueExposure 0xdc |
| 91 |
These are the default values for offset and exposure time. |
| 92 |
You can change them (e.g. to speed up calibration) |
| 93 |
if you don't want to save the calibration data permanently. |
| 94 |
.TP |
| 95 |
.B vendorString "Artec" |
| 96 |
.TP |
| 97 |
.B modelString "E+ 48U" |
| 98 |
By default, the scanner is reported as "Artec E+ 48U". If you don't like this, e.g. |
| 99 |
because you have an Tevion MD 9693, then change the options accordingly. |
| 100 |
.SH FILES |
| 101 |
.TP |
| 102 |
.I /usr/local/etc/sane.d/artec_eplus48u.conf |
| 103 |
The backend configuration file (see also description of |
| 104 |
.B SANE_CONFIG_DIR |
| 105 |
below). |
| 106 |
.TP |
| 107 |
.I /usr/local/lib/sane/libsane\-artec_eplus48u.a |
| 108 |
The static library implementing this backend. |
| 109 |
.TP |
| 110 |
.I /usr/local/lib/sane/libsane\-artec_eplus48u.so |
| 111 |
The shared library implementing this backend (present on systems that |
| 112 |
support dynamic loading). |
| 113 |
.SH ENVIRONMENT |
| 114 |
.TP |
| 115 |
.B SANE_CONFIG_DIR |
| 116 |
This environment variable specifies the list of directories that may |
| 117 |
contain the configuration file. On *NIX systems, the directories are |
| 118 |
separated by a colon (`:'), under OS/2, they are separated by a |
| 119 |
semi-colon (`;'). If this variable is not set, the configuration file |
| 120 |
is searched in two default directories: first, the current working |
| 121 |
directory (".") and then in |
| 122 |
.IR /etc/sane.d . |
| 123 |
If the value of the environment variable ends with the directory |
| 124 |
separator character, then the default directories are searched after |
| 125 |
the explicitly specified directories. For example, setting |
| 126 |
.B SANE_CONFIG_DIR |
| 127 |
to "/tmp/config:" would result in directories |
| 128 |
.IR tmp/config , |
| 129 |
.IR . , |
| 130 |
and |
| 131 |
.I /etc/sane.d |
| 132 |
being searched (in this order). |
| 133 |
.TP |
| 134 |
.B SANE_DEBUG_ARTEC_EPLUS48U |
| 135 |
If the library was compiled with debug support enabled, this |
| 136 |
environment variable controls the debug level for this backend. Higher |
| 137 |
debug levels increase the verbosity of the output. |
| 138 |
|
| 139 |
Example: |
| 140 |
export SANE_DEBUG_ARTEC_EPLUS48U=3 |
| 141 |
|
| 142 |
.SH "SEE ALSO" |
| 143 |
.BR sane (7), |
| 144 |
.BR sane\-usb (5) |
| 145 |
|
| 146 |
.SH AUTHOR |
| 147 |
Michael Herder. |
| 148 |
.br |
| 149 |
This backend is based on the gt68xx test-program written by Sergey Vlasov, Andreas Nowack, and |
| 150 |
David Stevenson. Thanks to everyone who tested the backend or reported bugs. |
| 151 |
.br |
| 152 |
This man page is based on man |
| 153 |
.BR sane\-gt68xx (5), |
| 154 |
written by Henning Meier-Geinitz. |
| 155 |
|
| 156 |
.SH BUGS |
| 157 |
This backend has been tested on Linux only. If you are using it on a different platform, please |
| 158 |
contact us. |
| 159 |
.PP |
| 160 |
Interpolation with 1200 dpi is weak. |
| 161 |
.PP |
| 162 |
Support for buttons is missing due to missing support in SANE. |
| 163 |
.PP |
| 164 |
Please contact us if you find a bug: |
| 165 |
.IR http://www.sane\-project.org/bugs.html . |