| 1 |
.\" .IX sane-magicolor |
| 2 |
.TH "sane-magicolor" "5" "10 Jan 2011" "" "SANE Scanner Access Now Easy" |
| 3 |
.SH "NAME" |
| 4 |
sane\-magicolor \- SANE backend for KONICA MINOLTA magicolor and Toshiba TEC e-STUDIO scanners |
| 5 |
.SH "DESCRIPTION" |
| 6 |
The |
| 7 |
.B sane\-magicolor |
| 8 |
backend supports KONICA MINOLTA magicolor and Toshiba TEC e-STUDIO scanners connected via USB or LAN. |
| 9 |
.SH "SUPPORTED DEVICES" |
| 10 |
The following scanner should work with this backend: |
| 11 |
|
| 12 |
Device Details |
| 13 |
.br |
| 14 |
\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- |
| 15 |
.br |
| 16 |
Vendor: KONICA MINOLTA |
| 17 |
.br |
| 18 |
Model: magicolor 1690MF |
| 19 |
.br |
| 20 |
Vendor: Toshiba TEC |
| 21 |
.br |
| 22 |
Model: e-STUDIO2323AM |
| 23 |
|
| 24 |
.SH "CONFIGURATION" |
| 25 |
.PP |
| 26 |
This section describes the backend's configuration file entries. The file is located at: |
| 27 |
.IP |
| 28 |
.I /etc/sane.d/magicolor.conf |
| 29 |
.PP |
| 30 |
For a proper setup, at least one of the following entries are needed: |
| 31 |
.IP |
| 32 |
.I net autodiscovery |
| 33 |
.br |
| 34 |
.I net [IP ADDRESS] [DEVICE-ID] |
| 35 |
.br |
| 36 |
.I usb |
| 37 |
.br |
| 38 |
.I usb [VENDOR-ID] [DEVICE-ID] |
| 39 |
|
| 40 |
.SH "FILES" |
| 41 |
.TP |
| 42 |
.I /etc/sane.d/magicolor.conf |
| 43 |
The backend configuration file |
| 44 |
.TP |
| 45 |
.I /usr/lib/x86_64-linux-gnu/sane/libsane\-magicolor.a |
| 46 |
The static library implementing this backend. |
| 47 |
.TP |
| 48 |
.I /usr/lib/x86_64-linux-gnu/sane/libsane\-magicolor.so |
| 49 |
The shared library implementing this backend (present on systems that support dynamic loading). |
| 50 |
|
| 51 |
.SH "ENVIRONMENT" |
| 52 |
.TP |
| 53 |
.B SANE_CONFIG_DIR |
| 54 |
This environment variable specifies the list of directories that may contain the |
| 55 |
configuration file. On *NIX systems, the directories are separated by a |
| 56 |
colon (`:'), under OS/2, they are separated by a semi\-colon (`;'). |
| 57 |
If this variable is not set, the configuration file is searched in two |
| 58 |
default directories: first, the current working directory (".") and then in |
| 59 |
.IR /etc/sane.d . |
| 60 |
If the value of the environment variable ends with the directory separator character, |
| 61 |
then the default directories are searched after the explicitly specified directories. |
| 62 |
For example, setting |
| 63 |
.B SANE_CONFIG_DIR |
| 64 |
to "/tmp/config:" would result in directories |
| 65 |
.IR "/tmp/config" , |
| 66 |
.IR "." , |
| 67 |
and |
| 68 |
.I "/etc/sane.d" |
| 69 |
being searched (in this order). |
| 70 |
.TP |
| 71 |
.B SANE_DEBUG_MAGICOLOR |
| 72 |
If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher debug levels increase the verbosity of the output. |
| 73 |
|
| 74 |
Example: export SANE_DEBUG_MAGICOLOR=127 |
| 75 |
|
| 76 |
To obtain debug messages from the backend, set this environment variable before calling your favorite frontend (e.g. |
| 77 |
.BR xscanimage (1)). |
| 78 |
|
| 79 |
Example: SANE_DEBUG_MAGICOLOR=65 xscanimage |
| 80 |
.SH "KNOWN BUGS AND RESTRICTIONS" |
| 81 |
.PP |
| 82 |
Large color scans may sometimes timeout due to unknown reasons (the scanner simply stops returning data). |
| 83 |
.PP |
| 84 |
Cancelling large scans may lock up the scanner. |
| 85 |
|
| 86 |
.SH "SEE ALSO" |
| 87 |
.BR sane (7), |
| 88 |
.br |
| 89 |
.I http://wiki.kainhofer.com/hardware/magicolor_scan |
| 90 |
|
| 91 |
.SH "AUTHOR" |
| 92 |
.PP |
| 93 |
Reinhold Kainhofer |
| 94 |
.RI < [email protected] > |