| 1 |
.TH sane\-teco3 5 "14 Jul 2008" "" "SANE Scanner Access Now Easy" |
| 2 |
.IX sane\-teco3 |
| 3 |
.SH NAME |
| 4 |
sane\-teco3 \- SANE backend for TECO / RELISYS scanners |
| 5 |
.SH DESCRIPTION |
| 6 |
The |
| 7 |
.B sane\-teco3 |
| 8 |
library implements a SANE (Scanner Access Now Easy) backend that |
| 9 |
provides access to some TECO SCSI flatbed scanners. This backend |
| 10 |
should be considered |
| 11 |
.B alpha-quality |
| 12 |
software! TECO scanners are sold under |
| 13 |
various brands like RELYSIS, PIOTECH, TRUST. This backend may or |
| 14 |
may not support yours. |
| 15 |
.PP |
| 16 |
The scanners that should work with this backend are: |
| 17 |
.PP |
| 18 |
.RS |
| 19 |
.ft CR |
| 20 |
.nf |
| 21 |
Vendor Model TECO model status |
| 22 |
--------------------------- ---------- ---------- |
| 23 |
Relisys Scorpio VM3552 tested |
| 24 |
Plustek OpticPro 2400SP VM3552 untested |
| 25 |
PIOTECH Splendeur 3024 VM3552 tested |
| 26 |
Trust Imagery 2400 SP VM3552 tested |
| 27 |
Trust Imagery 4800 SP+ VM3552 tested |
| 28 |
Trust Imagery 9600 SP VM3552 untested |
| 29 |
.fi |
| 30 |
.ft R |
| 31 |
.RE |
| 32 |
|
| 33 |
The TECO VM number can usually be found at the back of the |
| 34 |
scanner. It is also part of the FCC ID. |
| 35 |
|
| 36 |
The options the backend supports can either be selected through |
| 37 |
command line options to programs like |
| 38 |
.BR scanimage (1) |
| 39 |
or through GUI |
| 40 |
elements in |
| 41 |
.BR xscanimage (1) |
| 42 |
or |
| 43 |
.BR xsane (1). |
| 44 |
|
| 45 |
.br |
| 46 |
If you have any success with a scanner not listed here, or if you notice |
| 47 |
any strange behavior, please report to the backend maintainer or to |
| 48 |
the SANE mailing list. |
| 49 |
|
| 50 |
.SH OPTIONS |
| 51 |
Valid command line options and their syntax can be listed by using: |
| 52 |
|
| 53 |
.RS |
| 54 |
scanimage \-\-help \-d teco3 |
| 55 |
.RE |
| 56 |
|
| 57 |
.TP |
| 58 |
.B Scan Mode |
| 59 |
|
| 60 |
.TP |
| 61 |
.B \-\-mode Black & White|Grayscale|Color |
| 62 |
Selects the basic mode of operation of the scanner. |
| 63 |
The |
| 64 |
.I Black & White |
| 65 |
mode is black and white only (1 bit). |
| 66 |
.I Grayscale |
| 67 |
will produce 256 levels of gray (8 bits). |
| 68 |
.I Color |
| 69 |
will produce a 24-bit color image. |
| 70 |
|
| 71 |
.TP |
| 72 |
.B \-\-resolution 1..1200 |
| 73 |
Selects the resolution for a scan. The scanner can do all resolutions |
| 74 |
between 1 and 1200, in increments of 1. |
| 75 |
|
| 76 |
.TP |
| 77 |
.B \-\-preview |
| 78 |
Requests a preview scan. The resolution used for that scan is 22 dpi |
| 79 |
and the scan area is the maximum allowed. The scan mode is user |
| 80 |
selected. The default is "no". |
| 81 |
|
| 82 |
.TP |
| 83 |
.B Geometry options |
| 84 |
|
| 85 |
.TP |
| 86 |
.B \-l \-t \-x \-y |
| 87 |
Control the scan area: |
| 88 |
.B \-l |
| 89 |
sets the top left x coordinate, |
| 90 |
.B \-t |
| 91 |
the top left y coordinate, |
| 92 |
.B \-x |
| 93 |
selects the width and |
| 94 |
.B \-y |
| 95 |
the height of the scan area. |
| 96 |
All parameters are specified in millimeters by default. |
| 97 |
|
| 98 |
.SH OPTIONS FOR COLOR MODE ONLY |
| 99 |
|
| 100 |
.TP |
| 101 |
.B \-\-custom\-gamma |
| 102 |
Allows the user to specify a gamma table (see the |
| 103 |
next 3 parameters). |
| 104 |
|
| 105 |
.TP |
| 106 |
.B \-\-red\-gamma\-table |
| 107 |
Can be used to download a user defined |
| 108 |
gamma table for the red channel. The table must be 1024 bytes long. |
| 109 |
|
| 110 |
.TP |
| 111 |
.B \-\-green\-gamma\-table |
| 112 |
Can be used to download a user defined |
| 113 |
gamma table for the green channel. The table must be 1024 bytes long. |
| 114 |
|
| 115 |
.TP |
| 116 |
.B \-\-blue\-gamma\-table |
| 117 |
Can be used to download a user defined gamma table |
| 118 |
for the blue channel. The table must be 1024 bytes long. |
| 119 |
|
| 120 |
|
| 121 |
.SH CONFIGURATION FILE |
| 122 |
The configuration file |
| 123 |
.I /etc/sane.d/teco3.conf |
| 124 |
supports only one item: the device name to use (eg |
| 125 |
.IR /dev/scanner ). |
| 126 |
|
| 127 |
|
| 128 |
.SH FILES |
| 129 |
.TP |
| 130 |
.I /usr/lib/x86_64-linux-gnu/sane/libsane\-teco3.a |
| 131 |
The static library implementing this backend. |
| 132 |
.TP |
| 133 |
.I /usr/lib/x86_64-linux-gnu/sane/libsane\-teco3.so |
| 134 |
The shared library implementing this backend (present on systems that |
| 135 |
support dynamic loading). |
| 136 |
|
| 137 |
|
| 138 |
.SH ENVIRONMENT |
| 139 |
.TP |
| 140 |
.B SANE_DEBUG_TECO3 |
| 141 |
If the library was compiled with debug support enabled, this |
| 142 |
environment variable controls the debug level for this backend. E.g., |
| 143 |
a value of 128 requests all debug output to be printed. Smaller levels |
| 144 |
reduce verbosity. |
| 145 |
|
| 146 |
|
| 147 |
.SH LIMITATIONS |
| 148 |
The windows TWAIN driver has many more options than this SANE |
| 149 |
backend. However they are only software adjustments. This backend only |
| 150 |
implements what the scanner can support. |
| 151 |
|
| 152 |
|
| 153 |
.SH BUGS |
| 154 |
Not much. |
| 155 |
|
| 156 |
|
| 157 |
.SH "SEE ALSO" |
| 158 |
.BR sane\-scsi (5), |
| 159 |
.BR scanimage (1), |
| 160 |
.BR xscanimage (1), |
| 161 |
.BR xsane (1), |
| 162 |
.BR sane (7) |
| 163 |
|
| 164 |
|
| 165 |
.SH AUTHOR |
| 166 |
.TP |
| 167 |
The package is actively maintained by Frank Zago. |
| 168 |
.I http://www.zago.net/sane/#teco3 |