Debian Codegraph @

upstream/debian-unstable/man5/sane-canon.5

raw
1 .TH sane\-canon 5 "11 Jul 2008" "" "SANE Scanner Access Now Easy"
2 .IX sane\-canon
3 .SH NAME
4 sane\-canon \- SANE backend for Canon SCSI scanners
5 .SH DESCRIPTION
6 The
7 .B sane\-canon
8 library implements a SANE (Scanner Access Now Easy) backend that
9 provides access to the following Canon flatbed and film scanners:
10 .PP
11 .RS
12 CanoScan 300
13 .br
14 CanoScan 600
15 .br
16 CanoScan FB620S
17 .br
18 CanoScan FB1200S
19 .br
20 CanoScan FS2700F
21 .br
22 CanoScan FS2710S
23 .br
24 .RE
25 .PP
26 Parallel port and USB scanners are not supported by this backend; see
27 the manual pages for
28 .BR sane\-canon_pp (5)
29 and
30 .BR sane\-canon630u (5)
31 for further information.
32 .PP
33 IMPORTANT: This is beta code. We tested the code on the scanners listed
34 above, using the computers and operating systems available to us, but we
35 cannot guarantee that the backend will work smoothly with future operating
36 systems, SCSI adapters, SANE frontend programs, or Canon scanners not
37 contained in the list above. In some cases your computer might even hang.
38 It cannot be excluded (although we consider it extremely unlikely) that your
39 scanner will be damaged.
40 .PP
41 That said, TESTERS ARE WELCOME. Send your bug reports and comments to
42 Manuel Panea
43 .IR <[email protected]> ;
44 for questions concerning the FB620 and FB1200S contact Mitsuru Okaniwa
45 .IR <m\[email protected]\-ho.ne.jp> ,
46 for the FS2710S Ulrich Deiters
47 .IR <[email protected]\-koeln.de> .
48
49 .SH TIPS (FS2700F)
50 .PP
51 Scanning either slides or negatives has been found to require rather
52 large gamma corrections of about 2.2 to 2.4 (same value for red, green,
53 and blue). It is recommended to use the automatic exposure controls
54 of the frontend
55 .BR xsane (1)
56 for best results.
57 .PP
58 The "Auto Focus" function triggers a special pass to determine the focus
59 value. After that, the real scanning pass takes place.
60 .PP
61 Even with "Auto Focus" turned on, the scanned image is often a bit too
62 blurred. Using the
63 .BR gimp (1)
64 to do a "Filter->Enhance->Sharpen" at about 40 to 60 improves the image
65 considerably.
66
67 .SH TIPS (FS2710S)
68 .PP
69 Gamma corrections are done not by the scanner, but by the backend.
70 The scanner is always run in 12-bit mode. In "color" mode the image
71 data are corrected for gamma, shadow point, etc., and then truncated
72 to 8-bit intensities; the default gamma value is 2.0. In "raw" mode the
73 image data are exported without corrections as 16-bit intensities; this
74 mode can be recommended if extensive adjustments have to be made to a
75 picture (and if the frontend can handle 16-bit intensities).
76 .PP
77 Negatives are handled by simple color inversion and will require manual
78 removal of blue discoloration.
79 .PP
80 .SH FILES
81 .TP
82 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-canon.a
83 The static library implementing this backend.
84 .TP
85 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-canon.so
86 The shared library implementing this backend (present on systems that
87 support dynamic loading).
88 .SH ENVIRONMENT
89 .TP
90 .B SANE_DEBUG_CANON
91 If the library was compiled with debug support enabled, this
92 environment variable controls the debug level for this backend. Higher
93 debug levels increase the verbosity of the output.
94
95 Example:
96 export SANE_DEBUG_CANON=4
97
98 .SH "SEE ALSO"
99 .BR sane\-scsi (5)
100 .br
101 .I http://www.rzg.mpg.de/~mpd/sane/doc/canon.install2700F.txt
102 (installation of a CanoScan 2700F)
103 .br
104 .SH AUTHOR
105 Helmut Koeberle, Manuel Panea, and Markus Mertinat;
106 .br
107 FB620S and FB1200S support by Mitsuru Okaniwa;
108 .br
109 FS2710S support by Ulrich Deiters
110 .br
111 Man page by Henning Meier-Geinitz (mostly based on canon.README)