Debian Codegraph @

upstream/debian-unstable/man5/sane-ibm.5

raw
1 .TH sane\-ibm 5 "13 Jul 2008" "" "SANE Scanner Access Now Easy"
2 .IX sane\-ibm
3 .SH NAME
4 sane\-ibm \- SANE backend for IBM and Ricoh SCSI flatbed scanners
5 .SH DESCRIPTION
6 The
7 .B sane\-ibm
8 library implements a SANE (Scanner Access Now Easy) backend that provides
9 access to the IBM 2456 and the Ricoh IS-410, IS-420, and IS-430 flatbed
10 scanners. Support for the IS-410 and IS-430 is untested. Please contact the
11 maintainer or the sane\-devel mailing list if you own such a scanner.
12 .PP
13 This backend is alpha-quality. It may have bugs and some scanners haven't been
14 tested at all. Be careful and pull the plug if the scanner causes unusual
15 noise.
16
17 .SH "DEVICE NAMES"
18 This backend expects device names of the form:
19 .PP
20 .RS
21 .I special
22 .RE
23 .PP
24 Where
25 .I special
26 is the path-name for the special device that corresponds to a SCSI
27 scanner. The program
28 .BR sane\-find\-scanner (1)
29 helps to find out the correct device. Under Linux, such a device name could be
30 .I /dev/sg0
31 or
32 .IR /dev/sga ,
33 for example. See
34 .BR sane\-scsi (5)
35 for details.
36
37 .SH CONFIGURATION
38 The contents of the
39 .I ibm.conf
40 file is a list of device names that correspond to SCSI
41 scanners. Empty lines and lines starting with a hash mark (#) are
42 ignored. See
43 .BR sane\-scsi (5)
44 on details of what constitutes a valid device name.
45
46 .SH FILES
47 .TP
48 .I /etc/sane.d/ibm.conf
49 The backend configuration file (see also description of
50 .B SANE_CONFIG_DIR
51 below).
52 .TP
53 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-ibm.a
54 The static library implementing this backend.
55 .TP
56 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-ibm.so
57 The shared library implementing this backend (present on systems that
58 support dynamic loading).
59 .SH ENVIRONMENT
60 .TP
61 .B SANE_CONFIG_DIR
62 This environment variable specifies the list of directories that may
63 contain the configuration file. On *NIX systems, the directories are
64 separated by a colon (`:'), under OS/2, they are separated by a
65 semi-colon (`;'). If this variable is not set, the configuration file
66 is searched in two default directories: first, the current working
67 directory (".") and then in
68 .IR /etc/sane.d .
69 If the value of the
70 environment variable ends with the directory separator character, then
71 the default directories are searched after the explicitly specified
72 directories. For example, setting
73 .B SANE_CONFIG_DIR
74 to "/tmp/config:" would result in directories
75 .IR tmp/config ,
76 .IR . ,
77 and
78 .I "/etc/sane.d
79 being searched (in this order).
80 .TP
81 .B SANE_DEBUG_IBM
82 If the library was compiled with debug support enabled, this
83 environment variable controls the debug level for this backend. Higher
84 debug levels increase the verbosity of the output.
85
86 .SH "SEE ALSO"
87 .BR sane (7),
88 .BR sane\-find\-scanner (1),
89 .BR sane\-scsi (5),
90
91 .SH AUTHOR
92 mf
93 .RI < [email protected] >
94 .br
95 Maintained by Henning Meier-Geinitz
96 .RI < henning@meier\-geinitz.de >