Debian Codegraph @

upstream/debian-unstable/man5/sane-hp5400.5

raw
1 .TH sane\-hp5400 5 "13 Jul 2008" "" "SANE Scanner Access Now Easy"
2 .IX sane\-hp5400
3 .SH NAME
4 sane\-hp5400 \- SANE backend for Hewlett-Packard 54XX scanners
5 .SH DESCRIPTION
6 The
7 .B sane\-hp5400
8 library implements a SANE (Scanner Access Now Easy) backend that provides
9 access to the following Hewlett-Packard USB flatbed scanners:
10 .PP
11 .RS
12 ScanJet 5400C
13 .br
14 ScanJet 5470C
15 .br
16 ScanJet 5490C
17 .RE
18 .PP
19 More details can be found on the hp5400 backend homepage
20 .IR http://hp5400backend.sourceforge.net/ .
21 .PP
22 This is ALPHA software. Keep your hand at the scanner's plug and unplug it, if
23 the head bumps at the end of the scan area. See also the BUGS section.
24 .PP
25 If you own a scanner other than the ones listed above that works with this
26 backend, please let us know this by sending the scanner's exact model name and
27 the USB vendor and device ids (e.g. from
28 .IR /proc/bus/usb/devices ,
29 .BR sane\-find\-scanner (1)
30 or syslog) to us. Even if the scanner's name is only slightly different from
31 the models mentioned above, please let us know.
32 .PP
33
34 .SH CONFIGURATION
35 The contents of the
36 .I hp5400.conf
37 file is a list of usb lines containing vendor and product ids that correspond
38 to USB scanners. The file can also contain the names of device files that
39 correspond to an HP 54XX scanner. Empty lines and lines starting with a hash
40 mark (#) are ignored. The scanners are autodetected by
41 .B usb vendor_id product_id
42 statements which are already included into
43 .IR hp5400.conf .
44 "vendor_id" and "product_id" are hexadecimal numbers that identify the
45 scanner. If autodetection does not work, add the device name of your scanner
46 to the configuration file, e.g.
47 .IR /dev/usb/scanner0 .
48 .PP
49
50 .SH FILES
51 .TP
52 .I /etc/sane.d/hp5400.conf
53 The backend configuration file (see also description of
54 .B SANE_CONFIG_DIR
55 below).
56 .TP
57 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-hp5400.a
58 The static library implementing this backend.
59 .TP
60 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-hp5400.so
61 The shared library implementing this backend (present on systems that
62 support dynamic loading).
63 .SH ENVIRONMENT
64 .TP
65 .B SANE_CONFIG_DIR
66 This environment variable specifies the list of directories that may
67 contain the configuration file. On *NIX systems, the directories are
68 separated by a colon (`:'), under OS/2, they are separated by a
69 semi-colon (`;'). If this variable is not set, the configuration file
70 is searched in two default directories: first, the current working
71 directory
72 .RI ( "." )
73 and then in
74 .IR /etc/sane.d .
75 If the value of the
76 environment variable ends with the directory separator character, then
77 the default directories are searched after the explicitly specified
78 directories. For example, setting
79 .B SANE_CONFIG_DIR
80 to "/tmp/config:" would result in directories
81 .IR "tmp/config" ,
82 .IR "." ,
83 and
84 .I "/etc/sane.d"
85 being searched (in this order).
86 .TP
87 .B SANE_DEBUG_HP5400
88 If the library was compiled with debug support enabled, this
89 environment variable controls the debug level for this backend. Higher
90 debug levels increase the verbosity of the output.
91
92 Example:
93 export SANE_DEBUG_HP5400=4
94
95 .SH "SEE ALSO"
96 .BR sane (7),
97 .BR sane\-usb (5),
98 .BR sane\-find\-scanner (1),
99 .br
100 .I http://hp5400backend.sourceforge.net/
101
102 .SH AUTHOR
103 Martijn van Oosterhout
104 .RI < [email protected] >,
105 Thomas Soumarmon
106 .RI < [email protected] >.
107 Manpage by Henning Meier-Geinitz
108 .RI < henning@meier\-geinitz.de >.
109
110 .SH BUGS
111 Scanning is only tested with Linux/ix86/gcc. Be careful when testing on other
112 operating systems and especially on big-endian platforms. The scanner may get
113 wrong data.