Debian Codegraph @

upstream/debian-unstable/man5/sane-epsonds.5

raw
1 .TH sane\-epsonds 5 "29 Mar 2015" "" "SANE Scanner Access Now Easy"
2 .IX sane\-epsonds
3 .SH NAME
4 sane\-epsonds \- SANE backend for EPSON ESC/I-2 scanners
5 .SH DESCRIPTION
6 The
7 .B sane\-epsonds
8 library implements a SANE (Scanner Access Now Easy) backend that provides access
9 to Epson ESC/I-2 scanners.
10 .PP
11 Valid command line options and their syntax can be listed by using
12 .PP
13 .RS
14 scanimage \-\-help \-d epsonds
15 .RE
16 .PP
17 Not all devices support all options.
18 .TP
19 .I Scan Mode
20 The
21 .B \-\-mode
22 switch selects the basic mode of operation of the scanner. Valid choices
23 are Lineart, Gray and Color. The Lineart mode is black and white only,
24 Gray will produce 256 levels of gray or more depending on the scanner
25 and Color means 24 bit color mode or more depending on the scanner.
26 Some scanners will internally use 36 bit color, their external interface
27 however may only support 24 bits.
28
29 The
30 .B \-\-depth
31 option selects the bit depth the scanner is using. This option is only
32 available for scanners that support more than one bit depth. Older
33 scanners will always transfer the image in 8bit mode. Newer scanners
34 allow one to select either 8 bits, 12 or 14 bits per color channel. For a
35 color scan this means an effective color depth of 36 or 42 bits over
36 all three channels. The valid choices depend on the scanner model.
37
38 The
39 .B \-\-resolution
40 switch selects the resolution for a scan. Some EPSON scanners will scan in
41 any resolution between the lowest and highest possible value. The list
42 reported by the scanner can be displayed using the "\-\-help \-d epson"
43 parameters to
44 .BR scanimage (1).
45
46 The geometry options
47 .B \-l \-t \-x \-y
48 control the scan area:
49 .B \-l
50 sets the top left x coordinate,
51 .B \-t
52 the top left y coordinate,
53 .B \-x
54 selects the width and
55 .B \-y
56 the height of the scan area. All parameters are specified in millimeters.
57
58 The
59 .B \-\-source
60 option selects the scan source. Valid options depend on the installed
61 options. The default is "Flatbed".
62
63 The
64 .B \-\-eject
65 option ejects the sheet in the ADF.
66
67 The
68 .B \-\-adf-mode
69 option select the ADF mode (simplex/duplex).
70
71 .SH CONFIGURATION FILE
72 The configuration file
73 .I /etc/sane.d/epsonds.conf
74 specifies the device(s) that the backend will use. Possible connection types are:
75 .TP
76 .B USB
77 For not automatically detected USB scanners, their VENDOR and PRODUCT ID can
78 be specified manually in the config file.
79 More information about valid syntax for USB devices can be found in
80 .BR sane\-usb (5).
81 .TP
82 .B Network (not yet supported)
83 Network scanners can be auto-discovered if
84 .B autodiscovery
85 is specified after
86 .B net
87 keyword. An IP address to connect to can also be used.
88 .SH FILES
89 .TP
90 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-epsonds.a
91 The static library implementing this backend.
92 .TP
93 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-epsonds.so
94 The shared library implementing this backend (present on systems that
95 support dynamic loading).
96 .SH ENVIRONMENT
97 .TP
98 .B SANE_DEBUG_EPSONDS
99 If the library was compiled with debug support enabled, this
100 environment variable controls the debug level for this backend. E.g.,
101 a value of 128 requests all debug output to be printed. Smaller
102 levels reduce verbosity. Values around 11-16 will usually be enough for
103 a bug report.
104
105 .SH "SEE ALSO"
106
107 .BR sane\-usb (5),
108 .BR scanimage (1),
109 .BR xscanimage (1),
110 .BR xsane (1)
111
112 .SH AUTHOR
113
114 The backend is written by Alessandro Zummo.