Debian Codegraph @

upstream/debian-unstable/man5/sane-dc25.5

raw
1 .TH sane\-dc25 5 "11 Jul 2008" "" "SANE Scanner Access Now Easy"
2 .IX sane\-dc25
3 .SH NAME
4 sane\-dc25 \- SANE backend for Kodak DC20/DC25 Digital Cameras
5 .SH DESCRIPTION
6 The
7 .B sane\-dc25
8 library implements a SANE (Scanner Access Now Easy) backend that
9 provides access to Kodak DC20 and DC25 cameras. At present, only
10 the DC25 has been tested, but since the code is based on a DC20
11 interface program, it is likely to work for that model also.
12 .SH "DEVICE NAMES"
13 The current version of the backend only allows one camera to be
14 connected. The device name is always "0".
15 .SH CONFIGURATION
16 The contents of the
17 .I dc25.conf
18 specify the serial port and baud rate to use. The baud rate
19 specifies the maximum rate to use while downloading pictures. (The
20 camera is always initialized using 9600 baud, then switches to the
21 higher rate). On my 90MHz Pentium, I usually have no problems downloading
22 at 115200 baud as long as the system is not excessively busy and
23 the "interrupt-unmask flag" is set in the IDE driver
24 .RI ( "hdparm \-u1" ).
25 Supported baud rates are: 9600, 19200, 38400, 57600, and 115200.
26 .PP
27 The dumpinquiry line causes some information about the camera to
28 be printed to stderr during startup. Note: This is not compatible
29 with saned, so make sure you don't have any dumpinquiry lines if you are
30 using saned (i.e. scanning on a remote machine using a
31 network).
32 .PP
33 Empty lines and lines starting with a hash mark (#) are
34 ignored. A sample configuration file is shown below:
35 .PP
36 .RS
37 port=/dev/ttyS0
38 .br
39 # this is a comment
40 .br
41 baud=115200
42 .br
43 dumpinquiry
44 .RE
45 .PP
46 .SH FILES
47 .TP
48 .I /etc/sane.d/dc25.conf
49 The backend configuration file (see also description of
50 .B SANE_CONFIG_DIR
51 below).
52 .TP
53 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-dc25.a
54 The static library implementing this backend.
55 .TP
56 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-dc25.so
57 The shared library implementing this backend (present on systems that
58 support dynamic loading).
59
60 .SH ENVIRONMENT
61 .TP
62 .B SANE_CONFIG_DIR
63 This environment variable specifies the list of directories that may
64 contain the configuration file. On *NIX systems, the directories are
65 separated by a colon (`:'), under OS/2, they are separated by a
66 semi-colon (`;'). If this variable is not set, the configuration file
67 is searched in two default directories: first, the current working
68 directory (".") and then in
69 .IR /etc/sane.d .
70 If the value of the
71 environment variable ends with the directory separator character, then
72 the default directories are searched after the explicitly specified
73 directories. For example, setting
74 .B SANE_CONFIG_DIR
75 to "/tmp/config:" would result in directories
76 .IR tmp/config ,
77 .IR . ,
78 and
79 .I "/etc/sane.d"
80 being searched (in this order).
81 .TP
82 .B SANE_DEBUG_DC25
83 If the library was compiled with debugging support enabled, this
84 environment variable controls the debug level for this backend.
85 A value of 128 requests maximally copious debug output; smaller
86 levels reduce verbosity.
87
88 .SH "SEE ALSO"
89 .BR sane (7)
90
91 .SH AUTHOR
92 Peter Fales,
93 .IR dc25\-devel@fales\-lorenz.net .
94
95 .SH BUGS
96 Known bugs/limitations are:
97 .PP
98 I haven't figured out how to trigger an option reload following a "scan."
99 This causes problems when a new picture is snapped for example, the
100 slider that is used to select the picture from the camera may not be
101 updated immediately.
102 .PP
103 More general comments, suggestions, and inquiries about frontends
104 or SANE should go to the SANE Developers mailing list
105 (see
106 .I http://www.sane\-project.org/mailing\-lists.html
107 for details).
108 You must be subscribed to the list, otherwise your mail won't be
109 sent to the subscribers.