Debian Codegraph @

upstream/debian-unstable/man5/sane-dc210.5

raw
1 .TH sane\-dc210 5 "11 Jul 2008" "" "SANE Scanner Access Now Easy"
2 .IX sane\-dc210
3 .SH NAME
4 sane\-dc210 \- SANE backend for Kodak DC210 Digital Camera
5 .SH DESCRIPTION
6 The
7 .B sane\-dc210
8 library implements a SANE (Scanner Access Now Easy) backend that
9 provides access to the Kodak DC210 camera. THIS IS EXTREMELY ALPHA
10 CODE! USE AT YOUR OWN RISK!!
11 .SH "DEVICE NAMES"
12 The current version of the backend only allows one camera to be
13 connected. The device name is always "0".
14 .SH CONFIGURATION
15 The contents of the
16 .I dc210.conf
17 specify the serial port and baud rate to use. The
18 .B baud
19 rate specifies the maximum rate to use while downloading pictures. (The
20 camera is always initialized using 9600 baud, then switches to the
21 higher rate). On my 90MHz Pentium, I usually have no problems downloading
22 at 115200 baud as long as the system is not excessively busy and
23 the "interrupt-unmask flag" is set in the IDE driver
24 .RI ( "hdparm \-u1" ).
25 Supported baud rates are: 9600, 19200, 38400, 57600, and 115200.
26 .PP
27 The
28 .B dumpinquiry
29 line causes some information about the camera to
30 be printed.
31 .PP
32 .B cmdrespause
33 specifies how many usec (1,000,000ths of a second) to wait between
34 writing the command and reading the result. 125000 seems to be the
35 lowest I could go reliably.
36 .PP
37 .B breakpause
38 specifies how many usec (1,000,000ths of a second) between sending the
39 "back to default" break and sending commands.
40 .PP
41 Empty lines and lines starting with a hash mark (#) are
42 ignored. A sample configuration file is shown below:
43 .PP
44 .RS
45 port=/dev/ttyS0
46 .br
47 # this is a comment
48 .br
49 baud=115200
50 .br
51 dumpinquiry
52 .br
53 cmdrespause=125000
54 .br
55 breakpause=1000000
56 .RE
57 .PP
58 .SH FILES
59 .TP
60 .I /etc/sane.d/dc210.conf
61 The backend configuration file (see also description of
62 .B SANE_CONFIG_DIR
63 below).
64 .TP
65 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-dc210.a
66 The static library implementing this backend.
67 .TP
68 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-dc210.so
69 The shared library implementing this backend (present on systems that
70 support dynamic loading).
71
72 .SH ENVIRONMENT
73 .TP
74 .B SANE_CONFIG_DIR
75 This environment variable specifies the list of directories that may
76 contain the configuration file. On *NIX systems, the directories are
77 separated by a colon (`:'), under OS/2, they are separated by a
78 semi-colon (`;'). If this variable is not set, the configuration file
79 is searched in two default directories: first, the current working
80 directory (".") and then in
81 .IR /etc/sane.d.
82 If the value of the
83 environment variable ends with the directory separator character, then
84 the default directories are searched after the explicitly specified
85 directories. For example, setting
86 .B SANE_CONFIG_DIR
87 to "/tmp/config:" would result in directories
88 .IR "tmp/config",
89 .IR ".",
90 and
91 .I "/etc/sane.d"
92 being searched (in this order).
93 .TP
94 .B SANE_DEBUG_DC210
95 If the library was compiled with debugging support enabled, this
96 environment variable controls the debug level for this backend.
97 A value of 128 requests maximally copious debug output; smaller
98 levels reduce verbosity.
99
100 .SH "SEE ALSO"
101 .BR sane (7)
102
103 .SH AUTHOR
104 Brian J. Murrell
105 .PP
106 This backend is based somewhat on the dc25 backend included in this
107 package by Peter Fales.
108 .PP
109 The manpage was copied from the dc25 backend and somewhat edited by
110 Henning Meier-Geinitz.
111
112 .SH BUGS
113 Known bugs/limitations are: ?
114 .PP
115 More general comments, suggestions, and inquiries about frontends
116 or SANE should go to the SANE Developers mailing list
117 (see
118 .I http://www.sane\-project.org/mailing\-lists.html
119 for details).
120 You must be subscribed to the list, otherwise your mail won't be
121 sent to the subscribers.