Debian Codegraph @

upstream/debian-unstable/man5/sane-teco1.5

raw
1 .TH sane\-teco1 5 "14 Jul 2008" "" "SANE Scanner Access Now Easy"
2 .IX sane\-teco1
3 .SH NAME
4 sane\-teco1 \- SANE backend for TECO / RELISYS scanners
5 .SH DESCRIPTION
6 The
7 .B sane\-teco1
8 library implements a SANE (Scanner Access Now Easy) backend that
9 provides access to some TECO SCSI flatbed scanners. This backend
10 should be considered
11 .B beta-quality
12 software! TECO scanners are sold under
13 various brands like RELISYS, PIOTECH, TRUST. This backend may or
14 may not support yours.
15 .PP
16 The scanners that should work with this backend are:
17 .PP
18 .RS
19 .ft CR
20 .nf
21 Vendor Model TECO model status
22 ---------------------- -------------- -----------
23 Relisys AVEC 2400 VM3520 tested
24 Relisys AVEC 2412 VM3520+ tested
25 Relisys AVEC 4800 VM4530 untested
26 Relisys AVEC 4816 VM4530+ untested
27 Relisys RELI 2400 VM3530 untested
28 Relisys RELI 2412 VM3530+ tested
29 Relisys RELI 2412 VM3530+ untested
30 Relisys RELI 4816 VM4540 tested
31 Relisys RELI 4830 VM4542 tested
32 Relisys RELI 9600 VM6530 untested
33 Relisys RELI 9612 VM6530* untested
34 Relisys RELI 9624 VM6530+ untested
35 Relisys RELI 9630 VM6540 untested
36 Relisys RELI DS15 VM3440 untested
37 Relisys RELI DS6 VM3420 untested
38 Dextra DF-600P VM3510 tested
39 Dextra DF-4830T VM4542 untested
40 Dextra DF-1200T+ VM3530+ untested
41 Dextra DF-9624 VM6530+ untested
42 .fi
43 .ft R
44 .RE
45
46 Note that the untested scanner will not be directly supported. You
47 should contact the author for that.
48
49 The TECO VM number can usually be found at the back of the scanner. It
50 is also part of the FCC ID.
51 .I sane\-find\-scanner \-v
52 will also show the
53 SCSI inquiry, and if it is a TECO scanner, the name will be there too.
54
55 The options the backend supports can either be selected through
56 command line options to programs like
57 .BR scanimage (1)
58 or through GUI
59 elements in
60 .BR xscanimage (1)
61 or
62 .BR xsane (1).
63
64 .br
65 If you have any success with a scanner not listed here, or if you notice
66 any strange behavior, please report to the backend maintainer or to
67 the SANE mailing list.
68
69 Valid command line options and their syntax can be listed by using:
70
71 .RS
72 scanimage \-\-help \-d teco1
73 .RE
74
75 .TP
76 .B Scan Mode
77
78 .TP
79 .B \-\-mode Black & White|Grayscale|Color
80 Selects the basic mode of operation of the scanner. Valid choices are
81 .IR "Black & White" ,
82 .I "Grayscale"
83 and
84 .IR Color .
85
86 The
87 .I Black & White
88 mode is for black and white only (1 bit).
89 .I Grayscale
90 will produce 256 levels of gray (8 bits).
91 .I Color
92 will produce a 24 bit color image.
93
94 .TP
95 .B \-\-resolution 1..600
96 Selects the resolution for a scan. The scanner can do all resolutions
97 between 1 and 600, in increments of 1.
98
99
100 .TP
101 .B Geometry options
102
103 .TP
104 .B \-l \-t \-x \-y
105 Controls the scan area:
106 .B \-l
107 sets the top left x coordinate,
108 .B \-t
109 the top left y coordinate,
110 .B \-x
111 selects the width and
112 .B \-y
113 the height of the scan area. All parameters are specified in millimeters by default.
114
115
116 .TP
117 .B Enhancement options
118
119 .TP
120 .B \-\-custom\-gamma
121 (color mode only) allows the user to specify a gamma table (see the
122 next 3 parameters).
123
124 .TP
125 .B \-\-red\-gamma\-table
126 Can be used to download a user defined gamma table for the red channel.
127 The table must be 256 bytes long. Color mode only.
128
129 .TP
130 .B \-\-green\-gamma\-table
131 Can be used to download a user defined gamma table for the green channel.
132 The table must be 256 bytes long. Color mode only.
133
134 .TP
135 .B \-\-blue\-gamma\-table
136 Can be used to download a user defined gamma table for the blue channel.
137 The table must be 256 bytes long. Color mode only.
138
139 .TP
140 .B \-\-dither Line art|2x2|3x3|4x4 bayer|4x4 smooth|8x8 bayer|8x8 smooth|8x8 horizontal|8x8 vertical
141 Select the dither mask to use. Black & White only.
142
143
144 .TP
145 .B \-\-preview
146 Requests a preview scan. The resolution used is 22 dpi
147 and the scan area is the maximum allowed. The scan mode is user
148 selected. The default is "no".
149
150
151 .SH CONFIGURATION FILE
152 The configuration file
153 .I /etc/sane.d/teco1.conf
154 supports only one item: the device name to use (eg
155 .IR /dev/scanner ).
156
157
158 .SH FILES
159 .TP
160 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-teco1.a
161 The static library implementing this backend.
162 .TP
163 .I /usr/lib/x86_64-linux-gnu/sane/libsane\-teco1.so
164 The shared library implementing this backend (present on systems that
165 support dynamic loading).
166
167
168 .SH ENVIRONMENT
169 .TP
170 .B SANE_DEBUG_TECO1
171 If the library was compiled with debug support enabled, this
172 environment variable controls the debug level for this backend. E.g.,
173 a value of 128 requests all debug output to be printed. Smaller levels
174 reduce verbosity.
175
176
177 .SH LIMITATIONS
178 The windows TWAIN driver has many more options than this SANE
179 backend. However they are only software adjustments. This backend only
180 implements what the scanner can support.
181
182
183 .SH BUGS
184 None known.
185
186 .SH "SEE ALSO"
187 .BR sane\-scsi (5),
188 .BR scanimage (1),
189 .BR xscanimage (1),
190 .BR xsane (1),
191 .BR sane (7)
192
193 .SH AUTHOR
194 .TP
195 The package is actively maintained by Frank Zago.
196 .I http://www.zago.net/sane/#teco
197
198 .SH CREDITS
199
200 Thanks to Gerard Delafond for the VM4542 support.
201 Thanks to Jean-Yves Simon for the VM3510 support.