Debian Codegraph @

eyes17/helpFiles/hi/_sources/6.2.rst

raw
1 Digitizing Pendulum Oscillations
2 ================================
3
4 The nature of oscillations of a pendulum can be studied by digitizing the angular
5 displacement as a function of time. By fitting this data with a sinusoid, the
6 time period can be extracted. However, it is much cheaper to digitize the velocity
7 of the pendulum, using a simple DVD motor. Attaching the pendulm to the axis of the
8 motor and oscillating it induces voltage, proportional to the angular velocity
9 of the pendulum.
10
11 Objective
12 ---------
13
14 Digitize the angular velocity of a rod pendulum and calculate the value of 'g'
15 from it.
16
17 Procedure
18 ---------
19
20 .. image:: schematics/pend-digitize.svg
21 :width: 350px
22
23 - Attach some sort of rigid pendulum to the axis of the motor.
24 - Connect the motor between A3 and GND
25 - Connect :math:`100~\Omega` resistor from Rg to Ground
26 - Oscillate the pendulum and START digitizing
27
28 .. image:: pics/pendulum-screen.png
29 :width: 400px
30
31 Discussion
32 ----------
33
34 The observed waveform is shown in figure. Fitting it with equation
35 :math:`A = A_0 \sin(\omega t + \theta) \exp( Dt) + C`, using Grace gave an
36 angular frequency of :math:`10~Hz`.
37
38 The pendulum should be made with a heavy bob and a light weight rod
39 connecting it to the axis of the motor. In this case, the DC motor acts
40 like a generator and the voltage is proportional to the instantaneous
41 angular velocity.