| 1 |
Clock Divider |
| 2 |
============= |
| 3 |
A D-type flip-flop can be configured as a clock divider. |
| 4 |
|
| 5 |
Objective |
| 6 |
--------- |
| 7 |
|
| 8 |
Study of a clock divider, using a D flip-flop (TTL family, 7474). |
| 9 |
|
| 10 |
Procedure |
| 11 |
--------- |
| 12 |
|
| 13 |
.. image:: schematics/clock-divider.svg |
| 14 |
:width: 300px |
| 15 |
|
| 16 |
- Enable A1 and A2, set range to 8 volts fullscale |
| 17 |
- Set SQ1 to 1000 Hz |
| 18 |
|
| 19 |
For a symmetric input, the input and output waveforms are shown below. |
| 20 |
|
| 21 |
.. image:: pics/clock-divider-screen.png |
| 22 |
:width: 400px |
| 23 |
|
| 24 |
Discussion |
| 25 |
---------- |
| 26 |
|
| 27 |
The output toggles at every rising edge of the input, resulting in a |
| 28 |
division of frequency by two. The output is a symmetric squarewave, |
| 29 |
irrespective of the duty cycle of the input pulse, as shown below. Every rising edge |
| 30 |
of the input results in a level change at the output. |
| 31 |
|
| 32 |
.. image:: pics/clock-divider-screen-2.png |
| 33 |
:width: 400px |