| 1 |
Transient Response of RL circuits |
| 2 |
================================= |
| 3 |
|
| 4 |
In an RL circuit :math:`V = RI + L(dI/dt)` and solving this will give |
| 5 |
:math:`I = I_0 \times e^{ (R/L)t}`. The coefficient of the exponential term R/L |
| 6 |
can be extracted from the graph of voltage across the inductor. The |
| 7 |
resistance of the inductor coil should be included in the |
| 8 |
calculations, :math:`R = R_{ext} + R*_L`. |
| 9 |
|
| 10 |
Objective |
| 11 |
--------- |
| 12 |
Capture and analyse the voltage across an inductor when a voltage step is applied |
| 13 |
to it via a series resistor. By measuring the voltage across the |
| 14 |
inductor as a function of time, we can extract the R/L ratio. |
| 15 |
|
| 16 |
Procedure |
| 17 |
--------- |
| 18 |
|
| 19 |
.. image:: schematics/RLtransient.svg |
| 20 |
:width: 300px |
| 21 |
|
| 22 |
- Use the 3000 turn coil as inductor |
| 23 |
- Click on *0->5V STEP* and *5->0V step* Buttons to plot the graphs |
| 24 |
- Adjust the horizontal scale, if required, and repeat. |
| 25 |
- Calculate the value of inductance |
| 26 |
- Insert an iron core into the inductor and repeat |
| 27 |
|
| 28 |
.. image:: pics/RLtransient-screen.png |
| 29 |
:width: 400px |
| 30 |
|
| 31 |
Discussion |
| 32 |
---------- |
| 33 |
|
| 34 |
The transient response of the RL circuit is shown in figure. The |
| 35 |
exponential curve is fitted to extract the L/R value. The resistance of |
| 36 |
the coil is measured by comparing it with the known external resistance |
| 37 |
under DC conditions. A2 is connected to OD1 for a more accurate |
| 38 |
measurement of the coil resistance. From this the program calculates the |
| 39 |
value of inductance and displays it. |
| 40 |
|
| 41 |
The applied voltages are above zero, but the graph went to negative |
| 42 |
voltages. Why ? |
| 43 |
|
| 44 |
What was the current before doing the 5->0 step ? What is back EMF ? |
| 45 |
|
| 46 |
Repeat with two coils in series, by (a) placing them far away (b) |
| 47 |
placing one over the other and (c) after changing the orientation. The |
| 48 |
effect of mutual inductance can be seen. |
| 49 |
|
| 50 |
For detailed description of the theory of RC ircuits visit KhanAcademy_ |
| 51 |
|
| 52 |
.. _KhanAcademy: https://www.khanacademy.org/science/electrical-engineering/ee-circuit-analysis-topic/ee-natural-and-forced-response/a/ee-rl-natural-response |
| 53 |
|