Debian Codegraph @

eyes17/helpFiles/hi/_sources/2.15.rst

raw
1 Voltage of a lemon cell
2 =======================
3
4 A lemon cell is formed by inserting Copper and Zinc plates in to a lemon, or any dilute acid.
5 The voltage developed across the electrodes is very small and the cell has a very high internal
6 resistance. Due to this the voltage drops when a load resistor is connected.
7
8 Objective
9 ---------
10
11 Make a lemon cell and explore it's internal resistance.
12
13 .. image:: schematics/lemon-cell.svg
14 :width: 300px
15
16 Procedure
17 ---------
18
19 - Connect the electrodes to A1 and Ground
20 - Enable Checkbutton for displaying the voltage at A1
21 - Connect a :math:`1000\Omega` resistance across the electrodes.
22 - Measure the voltage again, to note down the reduction in it.
23
24 Discussion
25 ----------
26
27 Voltage across the Copper and Zinc terminals is nearly .9 volts.
28 Connecting the resistor reduces it to 0.33 volts. When connected,
29 current will start flowing through the resistor. But why is the voltage
30 going down ?
31
32 What is the internal resistance of the cell ?
33
34 Current is the flow of charges and it has to complete the path. That
35 means, current has to flow through the cell also. Depending on the
36 internal resistance of the cell, part of the voltage gets dropped inside
37 the cell itself. Does the same happen with a new dry-cell ?