| 1 |
B-H Curve |
| 2 |
========== |
| 3 |
|
| 4 |
The magnetic field density (H) around a current carrying coil depends on the coil parameters and the current. The magnetic flux density (B) depends on H and the magnetic permeability of the medium. B and H They are related by the equation |
| 5 |
:math:`B=\mu H` where :math:`\mu` is the permeability. |
| 6 |
|
| 7 |
Permeability is not a constant for ferromagnetic materials, like iron. If H is increased B increases and saturated at some point. When we reduce H, B does not follow the same path, |
| 8 |
as shown in the figure. |
| 9 |
|
| 10 |
.. image:: pics/hysteresis-loop.png |
| 11 |
:width: 400px |
| 12 |
|
| 13 |
Objective |
| 14 |
--------- |
| 15 |
|
| 16 |
To Record Magnetic Hysterisis using a solenoid connected to PV1, and a MPU925x magnetometer connected to the I2C port. |
| 17 |
|
| 18 |
Procedure |
| 19 |
--------- |
| 20 |
|
| 21 |
- Connect the coil between PV1 and ground |
| 22 |
- Connect the Magnetometer(MPU925x) to the I2C port |
| 23 |
- Place the solenoid on top of the sensor such that the magnetic axis is perpendicular to the sensor |
| 24 |
- Acquire data : This changes the PV1 voltage from -3 to 3 volts in 100 steps, and returns from 3V to -3V . This results in a proportional magnetic field generated by the solenoid which is also measured by the sensor and plotted |
| 25 |
- Add a ferromagnetic material such as an alligator clip, and repeat the acquisition. Observe the hysteris for various different materials. |
| 26 |
|