Debian Codegraph @

eyes17/helpFiles/hi/_sources/4.6.rst

raw
1 Transient response of LCR circuits
2 ==================================
3
4 .. image:: schematics/RLC-circuit.svg
5 :width: 300px
6
7 Closing the switch in the cicuit shown above will change the voltage across the
8 capacitor. Depending on the relative values of L, C and R, the voltage may
9 show oscillations or it may change in an exponential manner.
10
11 Objective
12 ---------
13
14 Apply a step voltage to an LCR circuit. Capture and analyse the resulting
15 voltage across the capacitor.
16
17 Procedure
18 ---------
19
20 .. image:: schematics/RLCtransient.svg
21 :width: 300px
22
23 - Use the 3000 turn coil and :math:`0.1~\mu F` capacitor
24 - Click on 5->0V STEP. Adjust x-axis and repeat if required.
25 - FIT the graph to find the resonant frequency & Damping factor.
26 - Repeat with increased capacitance and resistance values.
27
28
29 .. image:: pics/RLCtransient-screen.png
30 :width: 400px
31
32 The values chosen are for an underdamped response. The coil has in inductance
33 more than 100mH and a resistance of around :math:`500 \Omega`.
34 To increase damping, you may add a series resistor, or use a larger value
35 capacitor.
36
37 Discussion
38 ----------
39
40 Explore the oscillatory nature of L and C in series. Resonant frequency
41 of series LC circuit is given by :math:`f_0 = 1/(2\pi\sqrt{LC})`. The damping
42 factor is :math:`R/(2\sqrt{LC})`, and it is equal to 1 for critical
43 damping. Depending upon the value of C/L and R, the response could be under-damped,
44 critically-damped or over-damped.
45
46 We have used the 3000 turn coil and a :math:`0,1~\mu F` capacitor. The voltage
47 across the capacitor after a 5 to 0V step is shown in figure. The
48 measured resonant frequency tallies with :math:`f = 1/(2\pi\sqrt{LC})`,
49 within the component tolerance values.
50
51 https://en.wikipedia.org/wiki/RLC_circuit
52