| 1 |
Sound beats |
| 2 |
=========== |
| 3 |
|
| 4 |
Beats are produced when two sinusoidal sound waves of equal amplitude and very nearly equal frequencies mix. The amplitude or intensity of the combined signal would rise and fall at a rate equal to the difference between the two original frequencies. |
| 5 |
:math:`f_b = f_1 - f_2`. |
| 6 |
|
| 7 |
Objective |
| 8 |
--------- |
| 9 |
|
| 10 |
Study the beats produced by two Piezo buzzers are excited by two nearby |
| 11 |
frequencies. The sound is captured by a microphone. |
| 12 |
|
| 13 |
Procedure |
| 14 |
--------- |
| 15 |
|
| 16 |
.. image:: schematics/sound-beats.svg |
| 17 |
:width: 300px |
| 18 |
|
| 19 |
- Set WG to 3500 Hz and SQ1 to 3600 Hz |
| 20 |
- Enable WG and SQ1 separately to check the MIC output |
| 21 |
- Adjust positions of Piezo buzzers, from the mic, to get almost same |
| 22 |
amplitude with both |
| 23 |
- Select both of them to get the beat pattern |
| 24 |
- Press FFT to view the frequency spectrum |
| 25 |
|
| 26 |
.. image:: pics/sound-beats-screen.png |
| 27 |
:width: 400px |
| 28 |
|
| 29 |
|
| 30 |
Discussion |
| 31 |
---------- |
| 32 |
|
| 33 |
From figure it can be seen how the low frequency envelope is created. |
| 34 |
Distance between two minimum pressure points of the envelope, |
| 35 |
corresponds to the beat wavelength. The Fourier transform of the output |
| 36 |
shows the two different frequency components. |