| 1 |
AC Transformer |
| 2 |
=============== |
| 3 |
|
| 4 |
There will be a time varying magnetic field around a conductor carrying AC. |
| 5 |
A voltage will be induced across another conductor placed in this field. |
| 6 |
This is the working principle of a transformer, that can be demonstrated using the two |
| 7 |
coils included in the kit. |
| 8 |
|
| 9 |
Objective |
| 10 |
--------- |
| 11 |
|
| 12 |
Construct a transformer demonstrate mutual induction using two coils. One |
| 13 |
coil, the primary, is connected between WG and Ground. The axes of the |
| 14 |
coils are aligned and any ferromagnetic material may be inserted for better coupling. |
| 15 |
|
| 16 |
Procedure |
| 17 |
--------- |
| 18 |
|
| 19 |
.. image:: schematics//transformer.svg |
| 20 |
:width: 300px |
| 21 |
|
| 22 |
- Make connections as shown in the figure |
| 23 |
- Enable A1 and A2 |
| 24 |
- Set WG to 1000 Hz |
| 25 |
- Bring the coils close and watch the voltage on A2. |
| 26 |
- Try inserting an iron core, a nail or screwdriver also would do. |
| 27 |
|
| 28 |
.. image:: pics/transformer-screen.png |
| 29 |
:width: 300px |
| 30 |
|
| 31 |
Discussion |
| 32 |
---------- |
| 33 |
|
| 34 |
The applied waveform and the induced waveform are shown in figure. A |
| 35 |
changing magnetic filed is causing the induced voltage. In the previous |
| 36 |
two experiments, the changing magnetic field was created by the movement |
| 37 |
of permanent magnets. In the present case the changing magnetic field is |
| 38 |
created by a time varying current. |
| 39 |
|
| 40 |
Try doing this experiment using a squarewave. Connect a 1kΩ resistor |
| 41 |
across secondary coil to reduce ringing. |