Debian Codegraph @

eyes17/helpFiles/hi/_sources/2.21.rst

raw
1 Stroboscope
2 ===========
3
4 A stroboscope is an instrument used to make a cyclically moving object appear to be slow-moving, or stationary.
5 It consists of light source which produces brief repetitive flashes of light. If a body rotating at some frequency
6 is illuminated with a light flashing at the same frequency, it is visible only when it is at a particular position.
7 This gives an impression that it is stationary. If the two frequencies differ slightly, the body will apprear to
8 move very slowly.
9
10 Objective
11 ---------
12
13 Observation of a rotating body with a periodic flashed light,
14 using a disk with a marker.
15
16 Procedure
17 ---------
18
19 .. image:: schematics/stroboscope.svg
20 :width: 300px
21
22 - The disk is rotated by powering the motor by a 1.5 V cell.
23 - Connect a white LED to SQ1
24 - Set the dutycycle of SQ1 to 20% or less
25 - Adjust the frequency of SQ1, to make the disk appear stationary
26 - You need a dark area, no other light should fall on the body.
27
28 Discussion
29 ----------
30
31 When the frequency of the phenomenon under observation and the frequency
32 of the flashing light are matching, one can see a still image.
33
34 What happens when the frequency of the light is slightly increased, or slightly
35 decreased?
36
37 What happens when the frequency of the flashing light is twice the frequency
38 of the phenomenon? and when it is the half of its value?