Debian Codegraph @

eyes17/helpFiles/hi/_sources/3.3.rst

raw
1 Fullwave rectifier using PN junctions
2 =====================================
3
4 A half wave rectifier output depends on the filter capacitor for a long duration to provide DC output. This
5 results in larger ripple and not suitable for higher current. A fullwave rectifier solves this by providing
6 output for both negative and positive halfcycles. However it requires two out of phase AC inputs, generally
7 provided by a transformer with a center tap.
8
9 Objective
10 ---------
11
12 Make a full wave rectifier, using two diodes. Two AC waveforms,
13 differing by 180 degree in phase, are provided by the WG and :math:`\bar{WG}` outputs.
14
15 .. image:: schematics/fullwave.svg
16 :width: 300px
17
18 Procedure
19 ---------
20
21 - Make connections on a breadboard
22 - Enable A1, A2 and A3
23 - Set WG to 1000Hz and adjust timebase to view 4 to 5 cycles
24
25 .. image:: pics/fullwave-screen.png
26 :width: 400px
27
28 Discussion
29 ----------
30
31 Adding capacitors to reduce the ripple is left as an exercise to the
32 user. This experiment is only to demonstrate the working of a full wave
33 rectifier, it cannot provide more than few milli amperes of current.
34
35 Why full-wave rectifier is superior to half-wave rectifier ?