| 1 |
Summing Amplifier |
| 2 |
================= |
| 3 |
|
| 4 |
Operational amplifiers can be used for simulating mathematical operations like addition, integration, |
| 5 |
differentiation etc. |
| 6 |
|
| 7 |
Objective |
| 8 |
--------- |
| 9 |
|
| 10 |
Make a summing amplifier using an Op-Amp and test it. |
| 11 |
|
| 12 |
Procedure |
| 13 |
--------- |
| 14 |
|
| 15 |
.. image:: schematics/opamp-summing.svg |
| 16 |
:width: 300px |
| 17 |
|
| 18 |
- Make the circuit on bread board, as shown. Use :math:`1k\Omega` for all resistors |
| 19 |
- Set PV1 and PV2 to 1V each |
| 20 |
- Enable A1, A2 and A3 |
| 21 |
- Observe the outputs. Verify that the output is the sum of inputs |
| 22 |
|
| 23 |
The output is given by |
| 24 |
:math:`V_{out}= \frac{R_{1}}{R_{f}}V_{1} + \frac{R_{2}}{R_{f}}V_{2} + ...` |
| 25 |
|
| 26 |
|
| 27 |
Discussion |
| 28 |
---------- |
| 29 |
|
| 30 |
The summation can be done using AC waveforms also. Our supply voltage is only 6V. So the output should be |
| 31 |
kept less than 4V. |
| 32 |
|
| 33 |
- Replace :math:`R_{1}` with :math:`10k\Omega` and feed SQ1 instead of PV1. |
| 34 |
|
| 35 |
|