Summing Amplifier ================= Operational amplifiers can be used for simulating mathematical operations like addition, integration, differentiation etc. Objective --------- Make a summing amplifier using an Op-Amp and test it. Procedure --------- .. image:: schematics/opamp-summing.svg :width: 300px - Make the circuit on bread board, as shown. Use :math:`1k\Omega` for all resistors - Set PV1 and PV2 to 1V each - Enable A1, A2 and A3 - Observe the outputs. Verify that the output is the sum of inputs The output is given by :math:`V_{out}= \frac{R_{1}}{R_{f}}V_{1} + \frac{R_{2}}{R_{f}}V_{2} + ...` Discussion ---------- The summation can be done using AC waveforms also. Our supply voltage is only 6V. So the output should be kept less than 4V. - Replace :math:`R_{1}` with :math:`10k\Omega` and feed SQ1 instead of PV1.