Debian Codegraph @

eyes17/helpFiles/hi/_sources/3.13.rst

raw
1 Diode V-I characteristics
2 =========================
3
4 The current through a PN jnction varies in a non-linear fashion with the voltage applied across it. The current is very small until the applied voltage exceeds the forward voltage of the diode. This can be visualized by plotting the current against the voltage.
5
6 Objective
7 ---------
8
9 Draw the V-I Characteristic of diode and compare the result with the theory.
10
11 Procedure
12 ---------
13
14 .. image:: schematics/diode_iv.svg
15 :width: 300px
16
17 - Make the connections as shown in the figure. Use :math:`1000\Omega` resistor
18 - Click on START to draw the characteristic curve.
19 - Analyse the data
20 - Plot the IV of LEDs
21
22 .. image:: pics/diode-iv-screen.png
23 :width: 400px
24
25 It is possible to do this by manually taking the reading, from the oscilloscope GUI.
26 The steps involved are:
27
28 - Set PV1 to 100mV
29 - Read the voltage at A1, voltage across the diode
30 - Calculate current from :math:`I=\frac{V_{PV1}-V_{A1}}{1000}`
31 - Increment PV1 by 100mV , up to 5V, and repeat the process
32 - plot the readings of I against A1.
33
34
35 Discussion
36 ----------
37
38 The IV characteristic of an ideal PN junction diode is given by equation
39 :math:`I = I_0 \times e^{(qU/kT) 1}`, where :math:`I_0` is the reverse saturation
40 current, :math:`q` the charge of electron, :math:`k` the Boltzmann constant, :math:`T` the
41 temperature in Kelvin. For a practical, non-ideal, diode, the equation
42 is :math:`I = I_0 \times e^{(qU/nkT) 1}`, where :math:`n` is the ideality factor, that
43 is 1 for an ideal diode. For practical diodes it varies from 1 to 2. We
44 have used a IN4148 silicon diode. The value of *n* for 1N4148 is around 2.
45 We have calculated the value of :math:`n` by fitting the experimental data with
46 the equation.
47
48 The voltage at which LED starts emitting light depends on its wavelength
49 and Planck’s constant. Energy of a photon is given by :math:`E = h\nu = hc/\lambda` .
50 This energy is equal to the energy of an electron that overcomes the
51 junction barrier and is given by :math:`E = eV_0`. So Planck’s constant
52 :math:`h = eV_0 \times \lambda / c`, where :math:`\lambda` is the wavelength of light from the LED, :math:`e`
53 the charge of electron and :math:`c` the velocity of light.
54
55 Repeat the experiment by heating the diode to different temperatures.