| 1 |
XY plotting |
| 2 |
=========== |
| 3 |
|
| 4 |
Oscilloscopes generally plots time X-axis. They also provide and X-Y mode, where one input is plotted on the X-axis. This feature is used for showing lissajou's figures and also for measuring the phase difference of two input waveforms. |
| 5 |
|
| 6 |
Objective |
| 7 |
--------- |
| 8 |
|
| 9 |
Plot two signals in the X-Y mode and find out their phase difference. The phase difference is be generated by CR circuit. |
| 10 |
|
| 11 |
.. image:: schematics/RCsteadystate.svg |
| 12 |
:width: 300px |
| 13 |
.. image:: pics/phase-from-xy-screen.png |
| 14 |
:width: 300px |
| 15 |
|
| 16 |
Procedure |
| 17 |
--------- |
| 18 |
|
| 19 |
- Make the connections as shown in the figure. Use :math:`1 k\Omega` and :math:`1 \mu F` |
| 20 |
- Note down the maximum value :math:`y_{max}` and the y-intercept :math:`y_{int}` |
| 21 |
|
| 22 |
The phase difference is given by the equation :math:`\theta = sin^{-1}\Bigg(\frac{y_{int}}{y_{max}}\Bigg)` |
| 23 |
|
| 24 |
.. image:: pics/xyplot-screen.png |
| 25 |
:width: 400px |
| 26 |
|
| 27 |
|
| 28 |
Discussion |
| 29 |
---------- |
| 30 |
|
| 31 |
There is an option to plot (A1-A2) against A2. In the above circuit, this plots the voltage across the |
| 32 |
capacitor against the voltage across the resistor. |
| 33 |
|
| 34 |
- Select :math:`C = 1\mu F`, :math:`R = 1 k\Omega` and plot (A1-A2) vs A2. |
| 35 |
- Adjust the frequency to make both voltages equal. |