XY plotting =========== Oscilloscopes generally plots time X-axis. They also provide and X-Y mode, where one input is plotted on the X-axis. This feature is used for showing lissajou's figures and also for measuring the phase difference of two input waveforms. Objective --------- Plot two signals in the X-Y mode and find out their phase difference. The phase difference is be generated by CR circuit. .. image:: schematics/RCsteadystate.svg :width: 300px .. image:: pics/phase-from-xy-screen.png :width: 300px Procedure --------- - Make the connections as shown in the figure. Use :math:`1 k\Omega` and :math:`1 \mu F` - Note down the maximum value :math:`y_{max}` and the y-intercept :math:`y_{int}` The phase difference is given by the equation :math:`\theta = sin^{-1}\Bigg(\frac{y_{int}}{y_{max}}\Bigg)` .. image:: pics/xyplot-screen.png :width: 400px Discussion ---------- There is an option to plot (A1-A2) against A2. In the above circuit, this plots the voltage across the capacitor against the voltage across the resistor. - Select :math:`C = 1\mu F`, :math:`R = 1 k\Omega` and plot (A1-A2) vs A2. - Adjust the frequency to make both voltages equal.